We choose infrared heaters with a thermostat for giving and study how safe they are

It is rather unpleasant, having arrived at the dacha after a winter absence, to sit in the damp and cold while the house itself is warming up with a wood-burning stove or a gas (electric) boiler. After all, it's not a secret for anyone that it takes a lot of time. And how I would like that within 15-20 minutes at least in one room the temperature rises to a comfortable one. And the boilers need to be started after the winter reservation - and this also takes time. Just for such cases, there is an excellent solution on the shelves of Russian stores - these are infrared heaters with a thermostat for summer cottages. It is about them that we will talk today.

The principle of operation of infrared heaters and their impact on human health

We assume that now many readers will say that infrared heaters are unhealthy. But to this, we can say with complete confidence that they are deeply mistaken. The main mistake of people is that they confuse the name of these devices with ultraviolet, while these are completely different things. The principle of operation of an infrared heater is based on the same sunlight. It is in this way that heat spreads from the device, which heats not the air around it, but objects. But first things first.

What is special about such a device? The main thing is that by installing an infrared heater in the country, you can enjoy a comfortable room temperature in 10-15 minutes. If the room is large, it may take a little longer, but after 20 minutes it will definitely be warm enough. Now imagine that no one was at the dacha for 3-4 months. There is dust on the floor and objects, which is natural, and here the convector turns on. Everything that was previously lying on the floor instantly rises into the air, which you will have to breathe (well, or first clean up in a cold room, if you really like the frost). It is this fact that most often plays a major role, which means that the use of infrared heaters, devoid of such a drawback, will be the best way out of this situation.

Important information! No matter how good such a device is, you should be very careful when choosing it. After all, each of its types has its own characteristics and nuances. This means that you should consider in detail what types of heaters exist and in what area their application will be most optimal.

Why do you need a thermostat

A thermostat in an IR heater, if you use it in the country, is a necessary thing, if not more necessary. In a simplified form, this is a thermometer that itself measures the temperature and brings it to the required indicators. For example, if you are in the house, you can set the temperature in the range of 20-22 degrees, and it will be maintained at this level automatically. If you are absent somewhere, then it is rational to lower the boundary indicator, up to +5 degrees, so that the house does not freeze through. Upon returning, it will not be difficult to raise the temperature to a comfortable level, since the room did not freeze.

Such a rational setting of the temperature regime will allow not only to have savings in payment for energy resources (gas or electricity), but also to create an optimal microclimate in a room with irregular living.

Connecting IR heaters through a thermostat

An example of a practical connection of a thermostat

Separation of devices by power supply or what may be required for its operation

According to this parameter, such devices can be divided into two types - these are infrared heaters for summer cottages, powered by electricity and liquefied gas.

If we consider such devices from the point of view of safety, then electrical appliances are more reliable, but they also have drawbacks. After all, if the heater is quite powerful, then the wiring may need to be replaced or modernized, which is also quite inconvenient. But it is better to try to consider these types in more detail, and only after that draw any conclusions.

Electric infrared heaters and their characteristics

Such devices are quite convenient in terms of connection. All they need is a 220V socket. However, it is worth noting that it is necessary to first check the condition of the electrical wiring, provided that the cottage is not new. Although, even if the power grid of the house is in poor condition, there is always an option to extend a new line directly from the switchboard. We will definitely tell you how to do this in the upcoming articles.

Electric heaters for summer cottages, especially if they are not stationary, are very convenient in terms of transportation. When leaving for the winter, they can always be loaded into the car. Fortunately, some models are quite compact.

There is another interesting point. Many people come to the summer cottage with small children. And here we can note a rather important advantage, for example, of a wall-mounted infrared electric heater for summer cottages over a conventional oil heater. In order not to be unfounded, we will give one example. On one of the fairly well-known sites, there is a review of an electric infrared heater in exactly this aspect:

The guest. January 13, 2020:Good day! Maybe my review will help someone in choosing a wall heater! I got it at the beginning of winter, while I'm happy! The main plus, which I noted for myself, is that the device hangs on the wall, and my little daughter cannot reach it! It used to be oily and my daughter constantly bumped against it and pressed all the buttons in a row! Our room where it hangs is not very big, so it's warm! The heating radius is three meters! And I also forgot to write that, in comparison with oil, the wall one is quite economical, I realized this when the electricity bill came.

More details on Review: https://ru.otzyv.com/infrakrasnye-obogrevateli/review-272300

Features of a gas heater for a summer residence with a cylinder: the pros and cons of the device

A rather significant advantage of such a device is the low cost of fuel, which it consumes more than economically. This type of infrared heaters can be either with external gas equipment (in this case, it is quite compact), and with built-in. In addition, there are differences in the heating element. Here the division is as follows:

1. "Light" heater - here the combustion of fuel takes place, as it were, outside. The flame heats up the ceramic plates, which emit a glow both in the range visible to the human eye and in the infrared.
2. "Dark" in such a device, gas combustion occurs inside a special tube. Thus, the light familiar to our eye is practically not emitted.

If we talk about safety, then, of course, it is slightly lower for a ceramic infrared gas heater. But don't think he's dangerous. After all, the manufacturer follows all the rules and regulations. And in our time, the control of any equipment is quite strict. This means that any of the types and types is acceptable for use in country houses.

You can buy a gas heater for a summer residence at a price of 500 to 150,000 rubles. Let the dear reader not be confused by such a huge price range. The fact is that there are a lot of types and types of such equipment, as well as degrees of security.That is why it is worth very carefully considering the purpose of its acquisition, the necessary options and location, before deciding on something.

Most Popular IR Heaters

Consider the most popular infrared heaters with buyers that have earned the best reviews.

Almac IK11

This device has a power of 1,000 watts. The IR heater is suitable for wall mounting. The dimensions of the device (133x3x16 cm) and its unremarkable appearance are ideal for almost any room. Heating element - heating element. The thermostat is not built-in, so you have to buy it separately. The heater is easy to install, but the kit does not include wall fasteners or wires. The cost of such an IR device is from 3,500 rubles.

Almac IK11 has a simple and unassuming design

I took it to heat the greenhouse. Until the greenhouse was assembled, I hung up the houses as additional heating. It warms up very well. does not burst (like others) Appearance-5, Quality-5. Very satisfied!

Vadim Z.

- Very easy installation, if you missed and screwed the hooks in the wrong place, you can move the ears for suspension and everything is in order. The terminal blocks are automatic, I pressed the buttons, inserted the wire and the connection is ready. - Heats up quickly, 20-30 minutes pass and the room is heated. - Nice body, made of aluminum, tough, not tinplate. - 5 years warranty! Friends advised, said that it is a very economical thing and oxygen does not burn. I hung it up in an hour (I don't know how anyone, but I have the skills of electrical work), laid the wires in the cable channel. Together with the heater, I bought a thermostat, on it you can set the temperature you need. It warms up perfectly. I hung it over the bed, I liked the fact that the bed itself heats up (the linens are warm). I leave for work the thermostat I twist by 10 degrees, when I come home from work I twist it by 24. The thing is excellent, I really liked it. Now I'm thinking of hanging the same ones on the loggia and in the bathhouse (dressing room) in the village.

Stepan S.

Read also:  Which gas convector is better to choose for heating a private house

Disadvantages: Appearance (painting), but it is invisible on the ceiling. No wall mounts.

Ekaterina B.

Hyundai H-HC3–08-UI998

The miniature portable IR heater is capable of delivering 800W (400W for each of the two lamps). It is perfect for spot heating, as well as for alternate use both in the country and in everyday housing. The heater has a mechanical built-in thermostat. Among the minuses, it is worth noting the fragility of the structure. The cost of the device is from 600 rubles.

The device is available in white and silver

For its price of 800 r och it is good, but the grille is really deformed, bent, otherwise quiet, heats up perfectly, heats up quickly too.

Andrey

https://www.ozon.ru/reviews/141771632/

Lightweight, easy to use, excellent heating, no noise, similar in price, low power consumption. 2 lamps are switched on or 1 or 2. Consumption every 400 watts.

Golyakhovsky Andrey Nikolaevich

https://www.ozon.ru/reviews/141771632/

Disadvantages: The fragility of the lamps in such heaters, in the first 3 days the grill was bent, I'm afraid to leave it turned on in the nursery unattended and only turn it on at the top. The mode switch is made in such a way that the wife broke her nail and is more afraid to turn it on herself

Andrey

https://www.ozon.ru/reviews/141771632/

Ballu BIH-L-2.0

Powerful electric IR heater Ballu BIH-L-2.0 is capable of delivering power up to 2,000 watts. It is well suited for large spaces as well as semi-open spaces. Among the advantages, it is worth noting the versatility of the device - it can be installed on a wall, on a ceiling, even on the floor (when purchasing a telescopic steel tripod from the same manufacturer). A built-in mechanical thermostat allows relatively precise temperature control. Among the minuses, it is worth noting the small resource of the heating element. With regular use, it won't last long. The cost of such a heater starts from 2,500 rubles.

A tripod can be purchased separately, or you can fix the heater on a wall or ceiling using the supplied accessories

robust housing, easy installation, universal brackets, the ability to mount on a wall, ceiling or simply mount on a tripod, a silver-plated reflector provides uniform heating, there is a grill that protects against accidental contact with the heating element, an accurate thermostat.

Yuri Orlov

The heater was used as an additional heater in a private house. I will not talk about personal feelings and impressions from this product, for that they are personal, and, as they say, you cannot sew them to business. I can only say that the device worked properly for 3 months and went out at the very apogee of the Epiphany frost. Saddened, but relying on the two-year warranty promised by the manufacturer, I brought this miracle of Chinese climate technology to an authorized service center. And then the most interesting thing becomes clear - a burnt out infrared lamp in the device, or, as the manufacturer calls it, a heating element, is a consumable and does not fall into the list of warranty cases, which is prudently stated in the instructions for the heater. And everything would be fine, everything is clear, but THREE MONTHS !!! from the date of purchase. The resource of the heating element is not designed even for ONE WINTER !!! In addition, I will say that replacing this consumable costs 1 thousand rubles, which is almost 35% of the cost of the entire heater. Then count, think and draw your own conclusions.

Anonymous

Read also:  How to choose an electric (spiral) heater

I have a small country cafe, where visitors like to relax on the veranda and in the gazebo nearby, but with the onset of cold weather, their rows thin out significantly. I bought several heaters and put them on tripods (sold separately). You can sit comfortably and drink coffee outside. The devices themselves are simple - nothing more. They work stably. They are held securely on tripods and complement the interior, especially in the evening.

Garik Rozhin

Timberk TCH Q2 800

Timberk TCH Q2 800 is a 800W floor standing infrared heater. The device has two 400 W lamps. They can be turned on both separately and together, thus regulating the heating power. Users note that the device has a solid assembly, does not emit an unpleasant odor when heated, and does not make noise. For spot heating of a small space - a great option. If you want to heat the whole room as a whole, then you will need at least two such heaters. Better to buy a ceiling. Timberk TCH Q2 800 cost starts from 700 rubles.

Timberk TCH Q2 800 - lightweight and compact floor heater

Too light. If accidentally hit, it may fall. It's not hard to guess what will happen to the glass heater lamps.

Anonymous

Basically, heats near where it is directed. If you need to warm up, I direct it to myself, if the laundry needs to be dried quickly, I direct it to the laundry. The cat especially loves to lie in front of him))) After turning off, it also cools down quickly. For our room of 11 squares, it is enough.

Olya Ivanova

Types of heaters in place and option for their installation

Infrared heaters for summer cottages are made for almost any installation. If you divide them by this criterion, then it will look something like this:

• floor devices - mobile heaters, allowing them to be moved,
• wall heaters - stationary or mobile devices, decorated with pictures or screens,
• ceiling, which can be built into a suspended or even a stretch ceiling.

Let's consider each of them in a little more detail.

Advantages of wall mounted infrared heaters with thermostat

Such devices are quite popular for many reasons. The main ones are a rather aesthetic appearance, simple installation and ease of use. Prices for wall-mounted infrared heaters with a thermostat start at an average of 1200 rubles.

A fairly convenient device that is able to maintain a comfortable room temperature at a given level. If the device is made in the form of a picture or a panel, then it will also become an interior decoration in the country.

Reviews of infrared wall heaters are quite good. Here is one of them:

Pnikolka22, Russia, Budennovsk:Hello, I want to tell you about one not pretentious thing that I acquired not so long ago, namely last spring. I inherited an old house, in winter I did not dare to climb there as it was covered with snow. When spring came, I rushed to study it. And to my greatest regret, I discovered that the whole house was damp in the truest sense of the word. I was advised to deal with this misfortune with this heater, literally in a couple of days he did his job !!! On the very first day, the walls began to dry out, and after a couple of days the house was completely dry !!!! Fortunately, my house is small, so the heater coped with this task with a bang!

More details on Otzovik: https://otzovik.com/review_3965917.html

The most popular of these is the film infrared wall heater. The reason for this is their mobility. If necessary, they are disconnected from the network and wound into a neat roll. We can talk about these devices for a very long time, and therefore we will tell you more about such heaters in our articles.

Floor infrared heaters and their varieties

Such devices can be both gas and electric. But the first ones are of the greatest interest. The manufacturer offers models with external gas equipment (the cheapest) and with built-in ones. The latter are equipped with roller legs for movement and are usually made in the form of a fireplace, which also adds coziness. It is from the variety that the price of floor infrared heaters with a thermostat depends.

If we talk about devices with an external cylinder, then they are quite compact. Well, you can buy a floor-standing infrared heater of this type even for 500-700 rubles.

Ceiling devices, installation nuances and work features

These infrared heaters are stationary. Their installation is more difficult than that of the previous types, but it is still possible with your own hands. The only drawback can be considered possible difficulties during installation on suspended and tension structures. In this case, without certain skills, it is better to turn to professionals. But at the same time, the heating of the room will be even better. Ceiling infrared heaters with a thermostat are good in that the temperature below is always 1-2 ° C higher than in the ceiling area. This means that the room in the country will be much more comfortable than when using a convector, when using which the temperature near the floor is always lower.

Reviews of infrared ceiling heaters are good, and sometimes even great. Here is one of them:

Zinovia, Russia, Moscow:Purchased 2 years ago for a summer residence. Summer house without heating and the summer kitchen is the same. VERY happy. Previously, they used floor heaters and paid crazy money for electricity. And Peony works with a thermostat, maintains the set temperature and turns off. It warms up perfectly. I will definitely buy more of these in the rest of the rooms (while there are 2 of them)!

Pluses: Heats well.

Disadvantages: The kit does not include a thermostat and wires.

Overall impression: Very satisfied.

More details on Otzovik: https://otzovik.com/review_5029449.html

Just in this review, the absence of a thermostat is mentioned. It is about them that will be discussed further.

Using infrared heaters with thermostat for greenhouse

At the dacha, infrared heaters can be used not only for heating the house, but also for heating the greenhouse, especially at the stage of waiting for seed shoots, when the soil temperature is of great importance.Ceiling heating devices of low power and modest overall dimensions are best suited for this purpose - they are easier to install, and their power is quite enough to heat the soil. If the greenhouse is long, then you may need not one, but several such heaters. The cost of electricity will be fully compensated by an increase in germination (by 30-35%) and a reduction in the germination period of seeds. This is especially important if the seeds are expensive elite and you want to get a very early harvest.

Infrared heater in a greenhouse

The use of infrared heaters for heating greenhouses is more advisable than other heating devices. If you only heat the air in the greenhouse, then it rises up and the soil remains cold, which affects the similarity of seeds and the development of plants. When using infrared heating devices, it is not the air that heats up first, but the soil or plants, and only then the air. And the use of infrared heaters with a thermostat for heating the greenhouse will avoid overheating and make heating more economical.

Types of thermostats for an infrared heater and how to install them

First, let's figure out what a thermostat is and what are the advantages of installing it. If we take as an example an ordinary gas infrared heater at a price of 600 rubles, then we can say with confidence that there is no such additional device in it. This means that when a comfortable temperature in the room is reached, you will have to turn off the gas supply yourself, and turn it on again when it gets cold. If the thermostat is installed from the factory or connected independently, then setting the desired temperature, you can not worry about the further operation of the infrared heater. He himself will maintain heat at a given level.

The thermostat for an infrared heater can be either mechanical (a simpler and cheaper option), or electronic, with many additional functions. Let's try to consider all their possible varieties.

If we take a simple mechanical thermostat, then the scheme for connecting it to an infrared heater is elementary. With minimal knowledge of electrical engineering, any home craftsman can handle the installation.

Expert opinion Igor Marmazov Engineer-designer of ES, EM, EO (power supply, electrical equipment, interior lighting) LLC ASP North-West Ask a specialist Installation diagrams for different models may differ. Be sure to study the technical documentation before starting work. This will save you from such troubles as the failure of the thermostat or a short circuit.

It is also important to understand that connecting an infrared heater through a thermostat can save you from many problems, such as overheating of the device with its subsequent failure, overcooling of the room at night or excessive temperature rise in the room. This means that you should not neglect such protection and save money to the detriment of your safety and the performance of the heater.

Advantages and disadvantages

Of course, each technical equipment has its own strengths and weaknesses, it all depends on what goals are being pursued.Infrared devices are considered the best heating agent for summer cottages, as well as an excellent and economical analogue for apartments and houses. This information is collected on the basis of numerous sales and popularization of this product over a short period of time. Technical features such as:

• energy saving (infrared devices consume electricity 30-40% less than other heaters);
• low cost of goods;
• safety (does not harm health and does not ignite due to the fact that the tape itself does not heat up);
• takes up little space;
• practically does not have weight;
• easy installation (does not require specialized equipment for installation or special knowledge);
• very long service life (no wear parts);
• automatic thermoregulation;

There are not so many disadvantages, but they are still there:

• the whole house is heated unevenly, there are “cold zones”;
• with a weak current in the network, which is characteristic of suburban sectors, they may not cope well with their task;

How to choose an infrared heater and what to look for

Of course, as in any heater, the power of the device plays the main role. But here, along with it, it is necessary to pay attention to such a parameter as wavelength. Now let's try to understand what it is. There are three types:

1. Longwave - such devices are not used in apartments and country houses. Such heaters are widely used in industrial workshops and premises, at airports and train stations,
2. Medium wave - the most optimal option for living quarters than the previous one,
3. Shortwave - ideal heaters for summer cottages, which do not harm the body at all.

Very important! No matter how harmless the device is, you should not look at it for a long time - the cornea of ​​the eye is very delicate and it is quite possible to get it burned. You should also pay attention to the individual intolerance of the body to infrared radiation. This also happens, although quite rarely.

Well, in order to calculate the required power of the heater by the area of ​​the room, you can use the online calculator.

Calculator for calculating the required power of an electric heater

How to choose an IR heater

The choice of a heater largely depends on the conditions in the room. It is worth focusing on the key characteristics:

• power. An IR heater with a power of 100 W / m² is suitable for most situations. If the room has poor thermal insulation, then you can choose a more powerful option. But it is better not to buy a heater with a power higher than 150 W / m² - it may not be safe for health when installed indoors. Such devices are only suitable for semi-open spaces (terraces, for example);
• wavelength. Shortwave are used only in semi-open spaces. Medium wavelength is suitable for spacious rooms - for example, an open through two-story hall. For all other rooms, it is recommended to purchase a long-wave heater;
• mount location. Most often, ceiling ones are used in everyday life, but a portable outdoor infrared heater is also well suited for a summer residence;
• type of heating element. IR heaters with open elements (tungsten, halogen, heating elements and carbon) emit heat and glow, so they are not suitable for bedrooms. If you have small children, then such devices should also be abandoned - they are less safe and can cause severe burns when touched. But ceramic and film micathermic from the outside heats up much less, and they look more aesthetically pleasing. Their only drawback is the higher price;
• fire hazard sensors. These small parts will automatically shut off the device if it rolls over or when it reaches a critically high temperature.All modern heaters have such a system, but nevertheless, when buying, you should pay special attention to its presence;
• type of thermostat. An electronic programmable thermostat for a summer residence is not the best solution in terms of price and quality. If convenience and precision of control are important to you, choose electronic non-programmable devices. And if you value reliability and ease of repair in the event of a breakdown, mechanical thermostats are more suitable for you.

We calculate the suitable power

One of the main difficulties when choosing an IR heater is choosing the optimal power. Using a simple example, we will analyze how best to make calculations.

For optimal and uniform heating of the entire room, 100 W per 1 sq. M. Is enough. Suppose we have a living room of 28 sq.m. In this case, you can immediately assume that you need an IR heater with a power of about 2,800 watts. But the heating of such a large room from just one source will not be uniform enough. Rather, we divide all the power needed into two and get two small IR heaters with a power of about 1,400 watts. By installing them in opposite ends of the living room, we will get uniform heating without harm to health.

Consider a situation with poor thermal insulation (which is often found in the country). If the room does not retain heat well and cools down quickly, then a coefficient of 1.5 must be added to all the calculations above. Multiply the desired power indicator by it. If the room is completely devoid of thermal insulation (for example, semi-open structures), then this coefficient increases to 2.

How to install an infrared heater

The main thing to consider when installing a ceiling heater is the height of the ceiling. Make sure that it allows you to position the device, leaving the minimum distance from the heater to the head of a standing person. For example, the minimum distance allowed between the heater and the head of a standing person is 0.5 m. Thus, the ceiling in the room must be at least 2.30 m.

Also pay attention to the material of the ceiling decoration - it must be non-flammable. If your ceiling is finished with PVC film, clapboard or plastic panels, buy only a device specially designed for such cases, or give preference to a wall or floor heater.

Connection diagram for three or more ceiling-type infrared heaters

This type of heaters is easy to install. You do not need to purchase additional accessories - all the necessary fasteners are included in the kit with the device.

From the tools you will need:

• a hammer;
• drill;
• fasteners;
• ladder.

Step-by-step installation instructions

Installation steps for a ceiling infrared heater:

• Calculate where to optimally install the ceiling heater. This is usually the coldest spot above a door or window. But, depending on the purpose of the heater, the location may vary.
• Fasten the holders-brackets - metal corners with holes through which the ceiling is supposed to be drilled. Please note that there are two fasteners on each bracket - do not neglect them. The weight of the heater is light, but precautions will never hurt.
• Drive anchors into the drilled holes and tighten until they squeak.
• If the room has a very high ceiling, attach special hanging chains to the pre-fixed brackets. With their help, you can independently adjust the height of the heater.
• Hang the heater from the chains.
• Make electrical wiring. The wires from the device must pass to the thermostat, they are connected according to the diagram attached to the device. Usually, three heaters are connected to one regulator, but there are models with five connectors.
• Check each device one by one.
• Connect the wires from the thermostat to the electrical wiring.



Panel Infrared Ceiling Heaters

How to install a film heater

The foil ceiling heater is even easier to install. Fix the device to the ceiling using self-tapping screws or glue. Be careful with the heating element - choose other mounting locations on the surface of the device.

Depending on the size of the room, after installing the heater, the warmth in the room is felt already after 10-30 minutes.

Rating of ceiling infrared heaters, features of manufacturers

Various heaters of both domestic and foreign manufacturers are presented on the market. And each company has its own leading models. So, let's take a look at the most popular IR ceiling-type heaters:

Ceiling infrared heaters can be installed not only inside the building, but also outside, for example, on a veranda or in a gazebo

• infrared ceiling heaters Ballu. This company is the undisputed leader among the products of foreign manufacturers. Baloo infrared ceiling heaters are durable. In addition, the products of this company are universal: both models for domestic and industrial use are presented on the market;
• heaters of the Ecoline ceiling type. The devices of this company show themselves well in everyday life. Their strong point is high efficiency with a long period of use without loss of performance;

• infrared heaters Heat V. Industrial infrared ceiling heaters from this company have proven themselves especially well. Among their advantages are adaptability to continuous work, the ability to work at extreme temperatures and resistance to negative environmental influences;
• ceiling heaters PLEN. This company offers high quality film heaters.

Stationary heaters

As a rule, these are the most convenient devices, as they can be installed anywhere where there is an outlet, and carried from room to room. Floor standing infrared heater with thermostat has the following advantages:

• They have a very high efficiency, which is 99% and can be used in summer cottages located in areas with severe winters.
• The floor-standing device can be based on propane, which makes it cheaper, while maintaining a high level of heating of the room.

If the device contains gas in its base, then during operation it burns oxygen, therefore it is not worth installing it in small closed rooms without a humidifier. But it is indispensable in an open space when it gets colder, but there is a need to work in the yard.

• As a rule, modern floor-standing infrared heaters have a built-in fall-off function, which makes them safe when there is no one in the country in winter.

The thermostat in a stationary device can be either built-in or connected separately. Ideally, if you buy a device already equipped with a thermostat, but if it is not there, then it is better to take products from one company.

When an infrared emitter is chosen for a summer cottage, where the owners rarely appear in winter or do not come at all until spring, then it makes no sense to take a device with a mechanical thermostat that is manually adjusted. Although electronic or programmable counterparts are more expensive, if they have built-in Wi-Fi, they can be controlled from a distance, tracking all changes via a smartphone or computer. This is just as convenient when you have a trip to the country house, since you can change the settings on the way to it so that the house is warm and cozy by the time the household arrives.