Electric heater (convector) Electrolux ECH / AG

The prevalence of electric heaters

Due to the fact that gas is far from everywhere, and liquid-fired boilers have not been able to gain universal popularity, electric convectors are being purchased more and more often today. This applies not only to private houses, but also to apartments where central heating does not cope with the tasks assigned to it. The installation of an autonomous system is not always permitted by law, so many families are saved by purchasing electric heaters, which allow them to create a comfortable microclimate inside the home. When shopping, consumers face difficulties in choosing the best device. Experts advise choosing electric convectors that are easy to use, efficient, practical and safe.

The main disadvantages of convector heaters

The disadvantages we are considering are the most striking shortcomings characteristic of the entire army of convectors. Some disadvantages can be neglected, some can be dealt with, but some negative features are very serious.

High power consumption

You can save on heating by getting rid of heat loss.

Of all the possible minuses, this minus is the most important. Electric heating equipment actually consumes a gigantic amount of electricity. And it's almost impossible to do anything about it. Count for yourself:

For heating 10 sq. m. 1 kW of electricity is required;
For heating a household with an area of 50 sq. m. 5 kW of electricity per hour or 120 kW / day will be consumed - with an average cost of 1 kW of 4 rubles (depending on the region and the applicable tariff grid), this will be 480 rubles / day;
For a month in which there were 30 days, the expense will be 14,400 rubles.

The final results may be less - it all depends on the amount of heat loss, the set temperature and the type of control system used. But in general heating with convectors remains expensive - this is a minus.

A similar situation is observed with many other electrical heating devices, including boilers and radiators.

Why choose an electric convector

If you decide to purchase the equipment described in the article, then you can pay attention to the Electrolux convector. Such devices distribute hot air throughout the entire volume of the room silently and evenly. You may prefer a model that is equipped with a fan to speed up the heating process. However, in this case, you can not count on noiselessness. It should be noted that the surface of the device is completely safe, it does not heat up above 60 degrees and cannot cause burns. This factor plays an important role in the popularity of modern convectors. The "Electrolux" convector differs from oil installations in that it is not at all traumatic, which is why you can use this equipment even in a house where there are children and animals.

Convectors rating

Based on the models considered, we will make a rating of convectors in terms of reliability, quality and cost.
In terms of reliability, the leading position is occupied by Neurot convectors. Next come the models of the manufacturers Atlantik, Electrolux and Ballu.

The best wall convectors are Neurot and Timberk. Timberk is again the leader among floor heating manufacturers. Good models are also produced by Electrolux and Ballu.

But among the inexpensive brands, Atlantic convectors can be called. Cheap heating appliances are also produced by the Delonghi company. In general, the reviews about the models of this manufacturer are good. Therefore, if you want to buy a floor convector, the price for which is low, you can safely buy Delonghi products.

It is difficult to give an unequivocal answer which of the described convector models is worth purchasing.

It all depends on the operating conditions, your preferences regarding design, power and other technical parameters, as well as your financial situation. Of course, if the material condition allows, then it is better to purchase models from European manufacturers. In this case, you are guaranteed to get a quality device. If the budget is limited, then you can stop at cheaper Chinese brands.

Reviews of the Electrolux brand convector with different heating elements

On sale you can find the described device, in which heating elements of one of three types are installed, among them: monolithic, tubular, needle-shaped. As for the second type of element, it is equipped with aluminum fins. Needle heating elements are a rather thin dielectric plate, on which a chromium-nickel heating thread is installed, it is coated with an insulating varnish during the manufacturing process. Consumers claim that appliances with this addition cool and heat up almost instantly. Convection inside the equipment, which is created on the basis of a needle heater, is carried out due to the design of the case. If you decide to purchase an Electrolux convector with such a device, then, as experienced consumers emphasize, it will not be possible to use it inside wet rooms, this is due to the fact that the varnished surface is almost in no way protected from moisture.

Advantages of Electrolux convectors

The main advantages that make buyers choose Electrolux appliances:

heating elements of devices do not burn air and do not emit an odor;
uniform heating of air in the room;
the presence of a thermostat;
possibility of installation in a damp room;
low heating of the device case;
noiselessness;
ease of use;
noiselessness of work;
high level of efficiency;
easy installation;
availability of additional options: protection against overheating, against overthrow, protection against children;
long service life.

Professional advice

Such units are so popular today for the reason that they have a low cost, but the durability of the equipment, which is quite often heard from a modern buyer, is in doubt. In practice, needle heaters in electric convectors are rarely used, but if you still find such a unit on sale, then it is best to refrain from buying.

Reviews of convectors with a tubular heating element

If you consider the Electrolux convector as a heating device for your home, then it may be based on a tubular heating element. It is a steel tube in which a nichrome thread is installed. The tube is filled with a heat-conducting backfill in the form of an insulator. The tube has aluminum fins that provide efficient heat dissipation, enhancing convection. According to users, the tubular element heats up less than the needle element, but is more durable. Quite often, models of units with heating elements are made in a splash-proof design, which is why they can be used even in bathrooms, which is very popular with modern consumers.If you are not afraid that during operation the difference in thermal expansion of the ribs and the tube can cause sounds that resemble crackling, then you can safely choose such equipment for your home.

Wall convectors

The wall-mounted convector is the most frequently chosen heating equipment by users. The heat regulator with the maximum room heating temperature saves energy, because when the set temperature is reached, the device turns off.

The wall-mounted steel convector with a thermostat maintains the optimum temperature even in a heated room. With intermittent heating in country houses, the convector will maintain a stable temperature, saving fuel for full heating of the building.

Convectors built into the window sill reliably protect the room from cold penetration. They don't take up much space.

Floor convectors

Installation of floor convectors does not require special skills, the instructions describe the entire installation sequence.

Floor convectors are divided into several types:

with natural convection;
with forced convection;
able to function in rooms with high humidity.

Floor convectors are large casing, of various lengths, depending on the power of the convector. Easily fit into any interior, often made to order.

In the box itself there is a heat exchanger made of copper or aluminum with good thermal conductivity. Internal cleaning must be done every few years.

Floor convector

Floor convectors are radiators built into the floor. They are water and electric.

The skirting convector is used in rooms with an individual or central heating system.

Oil, water and other liquids are used as a heat source.

It successfully replaces the traditional heating radiator. It is a device consisting of a body made of various materials. As a rule, stainless or galvanized steel is used, which has increased resistance to corrosion.

In the body there is a heat exchanger made of a copper tube bent in the shape of a horseshoe. The aluminum fins increase the surface area of the heat exchanger.

The decorative grille, mounted on top of the convector, is made of steel, wood, aluminum.

The capacity depends on the temperature of the supplied heating medium and the intensity of the air flow around the heat exchanger.

They are used in various heating systems operating in a wide range of coolant temperatures - from 45 to 90 ° C. The built-in tangential fan, which provides an increase in the air flow rate, increases the performance and the rate of heat transfer to the convector.

Consumer reviews about convectors with a monolithic heater

Convector "Electrolux", reviews of which are often only positive, may have a monolithic heating element. According to experts, it is the most acceptable option, as it is silent. Due to the fact that the body of the heater is one-piece, and the ribs are an integral part of it, the equipment does not create additional sounds during use. Such devices are most popular due to the fact that they work with the least heat loss, and are also highly efficient. Professionals advise to stop your choice on models in which a tubular or monolithic version of the heating element is installed. The latter is the ideal solution.

Which convector is better to choose

Learn more about the cases of such a battery
Heating element for convectors
The presence of a thermostat in the convector
Calculation of the power of such a heating device

How to choose a convector for a summer residence? Today the Russian convector market is incredibly large: both European and Asian manufacturers are represented there. With such a variety, a problem arises related to which convector is better to choose for a summer residence. The main criteria for choosing this device are: safety, economy, long service life, as well as its cost. All these parameters (with the exception of cost) are determined by the design features of the convectors.

The main parameters when choosing a convector: safety, environmental friendliness, good operation, low cost.

Electric or gas convector? It is necessary to figure out what convectors exist today and whether it makes sense to say that the best are electric, and not any others. A similar device can work on the following types of substances:

with water;
using electrical energy;
using natural gas.

Due to the cost of natural gas, some consumers believe that the best gas convectors can be purchased in Russia. However, with this type of equipment, not everything is as simple as it seems. Finding such batteries is quite difficult when electrical units are sold everywhere.

Which convector is better to choose for a summer residence: wall-mounted or floor-standing?

Stages of installing a wall convector.

First of all, you need to decide how you plan to use the electric convector. Most often, electric convectors are installed permanently on the wall, under windows, or on a special bracket that comes with the kit. If you want to get a mobile heater that can be moved around the room, you will need to additionally purchase a set of legs (in most cases, it is sold separately for wall-mounted convectors) or buy a convector that is designed specifically for floor installation. Such batteries, which are originally intended for floor installation, are equipped with roller feet and a rollover sensor, which is quite an important factor for the operation of such a device. High quality floor-standing electric convectors can be found in the range of some German manufacturers.

Floor-standing electric convectors are narrow, low (20 cm) and long. Those that are fixed to the walls have a height of about 40-50 cm. There is a difference in the supply of heat. The most efficient heating devices are those that are located closer to the floor. This is due to the fact that warm air will go up. Therefore, wall mounted equipment is not very profitable to purchase.

Instructions for use

If you have purchased an Electrolux electric convector, then you should think about where it will be located. The device can be mounted on a wall, and you will need to use special mounts that come with the equipment. Quite often, consumers choose mobile models that can be moved from room to room. If you are more interested in the second option, then you need to pay attention to whether there are wheels in the delivery set, which will eliminate the need to search for this fittings in the city's shops. If you are considering at the point of sale convectors "Electrolux" with an electronic thermostat, then it is important to pay attention also to the overall dimensions of the device. This will allow you to fit the equipment most harmoniously into any interior. The most elegant models, which are skirting boards, can have a height of up to 15 centimeters.

Electric heater (convector) Electrolux ECH / AG - 500 EF

Model Description

Electric convector ECH / AG - EF

with high-precision electronic thermostat, 24-hour shutdown timer and LED display.The main difference of this convector is the multi-component AIR GATE air purification system. In the ECH / AG - EF model - a new generation X-DUOS heating element with an increased heat transfer area. The convector operates in full and half power modes. Waterproof class IP 24. Wall and floor installation is provided.

Design

Electric convector ECH / AG - EF

- a product of industrial art. A group of European designers and technologists worked on its creation, whose tasks were not only to improve thermal technology, but to develop a completely new device and endow it with the best consumer properties. Today Electrolux offers the result of its successful work - a combination of unique and effective solutions that have no analogues on the electric heating equipment market. Electrolux technologists have developed an aerodynamic shape of the convector and have chosen a lower option for placing the heating element inside the device body compared to traditional convectors. This solution made it possible to increase the draft of the convection movement, create a more powerful flow of hot air, which will heat up the entire room much faster. The aerodynamic device of the convection chamber of the heater and the specially shaped guiding louvers create an ideal trajectory for convection, which affects the uniform distribution of heat throughout the room. The ECH / AG - EF convector is made in a compact "French" standard size, which will help the user to always find a compromise solution when choosing a convector installation location.

ECH / AG design - EF is functional. Every detail has been thought out for a comfortable and convenient operation. With this product, Electrolux confirms its unique style and strong personality.

Aerodynamic hull design

The aerodynamic design of the ECH / AG - EF convector has no analogues in the world. It is designed to improve convection draft and increase the speed of warm air spreading over the entire area of the room. First, the air is cleaned through the AIR GATE filter system and enters the inside of the device through the lower air intake grille, then it instantly interacts with the X-DUOS heating element. After that, the heated air rushes upward through the convection chamber at high speed. The heat shield system directs heated air from the heating element into the room through the outlet grilles. The aerodynamic design of the enclosure is created in such a way as to achieve optimal movement of warm air, which will create perfect convection in the heated room. It should be noted that the system of heat shields protects the electronics of the convector from excessive heat, provides a lower temperature of the heater body (20% lower than that of traditional convectors), thereby increasing the service life of the device and guaranteeing the safety of its operation.

X-DUOS heating element

The X-DUOS heating element, developed for the AIR GATE series, is a one-piece X-shaped ribbed structure made of a special aluminum alloy using Nano-technologies, which made it possible to achieve a uniform temperature along the entire length of the heating element. The main feature of the heating element lies in the special treatment of its surface, at the output the structure of its surface is "shell-like". This technology has increased the heat transfer surface area by 25% compared to standard monolithic heating elements.

The X-DUOS shape and surface structure ensures maximum heat dissipation with minimum resistance to warm air flow.This allows you to quickly heat the room and significantly save energy (up to 20% when compared with other types of heaters).

The monolithic design of the X-DUOS heating element minimizes all possible heat losses, providing instant heating of the air, thereby demonstrating a high level of reliability and a longer service life of the device. Thanks to the design features and Nano-technologies used in the production of materials for the heating element, X-DUOS absolutely silently reaches the operating temperature in a record short time - up to 75 seconds.

Electric convector Electrolux ECH / AG - MF

can work in two modes: full and half power. The choice of the latter makes it possible to halve the load on the electrical network. An alternative choice of the convector's operating power is a necessary solution for heating private houses in which there is a limited supply of electricity.

Air purification system AIR GATE

A comprehensive and highly efficient air purification system is a unique feature of the ECH / AG - MF electric convectors. The heater copes with this task by means of the following filters: antistatic, anti-dust, carbon, catechin, Nano-silver

Anti-static dust filter

Retains large and medium-sized dust due to static electricity.

Charcoal filter

absorbs unpleasant odors, eliminates the smell of tobacco smoke, cleans the air from various chemical compounds.

Catechin filter

purifies the air using natural plant components (catechins) to protect against microbes. The catechin filter neutralizes bacteria and viruses. This filtration occurs due to antistatic nets, which allows you to retain the smallest particles of dust and aerosols. After six hours, 98% of viruses caught on the filter are no longer dangerous.

Nano-silver filter

also has high antibacterial properties. This is a filter with silver ions that neutralize bacteria or reduce their activity by destroying the structure and retaining them. The active silver contained in the filter constantly releases additional ions to increase the efficiency of air purification from bacteria. The mesh of the filter traps particles up to 3-5 nanometers in size, allowing even more thorough cleaning of the air from dust.

The AIR GATE air purification system performs another important function: it protects the heating element, preventing dust from settling on it and the appearance of unpleasant odors during the operation of the device, which directly affects the durability of the heater structure and increases its service life.

The operation and maintenance of AIR GATE filters is convenient and time-saving, all filters can be easily removed and reinstalled. The antistatic dust filter is flushed with tap water. Carbon, catechin, Nano-silver filters require periodic replacement (average service life is 3-4 months), the frequency of their renewal depends on the intensity and operating conditions of the electric convector ECH / AG - MF.

Environmental friendliness

Preserving the ecology of living and working space are the most important tasks solved by Electrolux. As you know, conventional convectors create a circulation of air in the room, which promotes the circulation of dust in the space. Convectors ECH / AG - MF are not only devoid of this drawback, but also able to reduce the amount of dust in the air, which is especially important if there are small children in the family, as well as people suffering from allergic or asthmatic diseases. The low temperature of the X-DUOS heating element practically does not affect the change in the level of air humidity in the room and does not lead to the combustion of oxygen, which is the key to the well-being of every family member.The AIR GATE filtration system fights most of the harmful particles in the air. Convectors of the AIR GATE series strive to correct, preserve and improve the environmental situation of heated rooms.

Intelligent control

For driving convectors ECH / AG - EF

a state-of-the-art new generation control unit has been developed. The logic for choosing the required temperature for heating the air and controlling other functions of the heater is extremely simple. The LED display shows not only the set and actual room temperature, but also all convector operating modes: full and ½ power, heating mode, timer, etc. It is enough to set the required temperature, and the convector will warm up the room to the set point and will automatically maintain it using an electronic thermostat. The ECH / AG - EF convector has a high-precision (up to 0.1 ° C) thermostat, which avoids temperature drops in the heated room. Accuracy up to a tenth of a degree allows you to achieve high efficiency - more than 90%, as well as save a significant amount of electricity (up to 20% compared to the operation of other types of thermostats). The control unit buttons provide the ability to set the required temperature in the room with a step of 1 ° C, in the range from 5 to 30 ° C. Convectors ECH / AG - EF are equipped with functions that restore the operating modes set by the user, even after its normal or forced shutdown (power surges, device failure). Activation of the functions "Memory of preset temperature" and "Auto Restart" will allow the convector to resume operation in the operating mode that was set before it was turned off. These functions save the user from repeated setting of the heater settings. Changing the operating mode of the device at full and half (and vice versa) power occurs with one key press, and the specified change will be reflected on the LED-display. The built-in timer allows you to set the required time for switching off the convector (from 0 to 24 hours).

The convector's instruction manual and the warranty card are placed in a special pocket on the back of the device. Thus, the user's guide to operating the heater is always at hand.

Reliability and safety of work

The most important criterion for choosing any electrical device is the level of its safety and reliability. Electric convectors manufactured by Electrolux are fireproof, withstand voltage drops in the electrical network, and have a high class of moisture resistance. The multi-level security system responds promptly to any changes that may lead to a failure in the convector's operation. This is protection against overheating and the ingress of foreign objects inside the device that interfere with air exchange, abnormal power outages. In such cases, the self-diagnosis function in Electrolux electric heaters makes it possible to quickly determine the malfunction of the device: an error code will appear on the LED display, which will characterize the area of the malfunction, and will help the service specialists to quickly eliminate the malfunction. Convectors ECH / AG - EF have a high degree of dust and moisture protection IP 24 (protection against splashes and jets of water), which allows them to be installed without risk in damp rooms. In operating mode, the temperature of the convector body is insignificant, which makes it possible to install it on walls made of wood. Electrolux convectors with electronic control have the "Parental Control" function: after setting the required operating mode of the heater, adults can block any possibility of changing the convector's settings (which is especially important for families with small children).

Universal installation

Electric convector ECH / AG - MF

has two placement options: stationary (fixed on the wall) and floor (installed on special legs with rollers for mobile movement from room to room). The complete set of each convector includes all the necessary elements for its installation. The wall mounting bracket has an additional step of protection - these are plastic stoppers that prevent the device from falling, even if, due to a shock or strong push, it accidentally falls off the mounting bracket. Protective plastic stoppers allow you to tilt the convector forward and clean the wall and the convector itself from dust without dismantling the device. For floor installation, the convector is supplied with legs with rollers. Electrolux engineers have carefully worked out and strengthened their design, increasing the stability and reliability of floor placement of the electrical appliance. Any of the options for installing the heater will only take a few minutes.

Warranty - 3 years

Reviews about the power of the "Electrolux" brand convector

Heating convectors "Electrolux" can have different power. The selection of this indicator can be made according to the following formula. It assumes the use of one kilowatt of power per 10 square meters of floor space. This is true if the ceiling height does not exceed 2.7 meters. If this figure is higher, then for every 10 centimeters of height it will be necessary to add 10% power. According to experienced users, it is important to take into account the fact that heating by a convector may not be the main one. In order to provide high-quality heating, you need as many convectors as there are windows in the room. If we are talking about a corner room or a room that is located above a cold basement, and also has a large glazing area, then you will need a sufficient supply of power, experts advise you to pay special attention to this.

Which is better: oil heaters or convectors

To provide a comprehensive answer to this question, you need to compare the fundamental characteristics of the devices. So, let's begin:

economical use - oil coolers consume more electrical energy. This is a significant plus in favor of convectors, because tariffs are constantly growing, and salaries are at a standstill;
warm-up time - according to this parameter, convector-type heaters win, since the heating element immediately heats the case. But in oil radiators, air heating takes place in several stages, therefore, when the device is turned on, the room is not filled with heat immediately;

Floor water convectors do not take up free space and have good performance characteristics

It is worth paying attention: such a disadvantage in modern models is compensated, because oil appliances are equipped with fans.

operating comfort - it is about ease of movement and installation. In this regard, convectors are more mobile and more convenient, because their weight does not exceed ten kilograms. Oil coolers are more bulky. In addition, wall-mounted convector equipment saves space in the room and makes cleaning easier;
service life - sooner or later a microcrack appears on the body of oil devices, through which the coolant slowly evaporates. This does not happen with convector devices, so they have been successfully operated for 10-15 years.

Oil radiators are gradually becoming a thing of the past, as light and compact appliances are displacing heavy units filled with a hot coolant from houses. Therefore, in the battle, which is better: an oil or convector heater, the latter wins. There is nothing surprising here, because leading manufacturers take into account important points and offer consumers good-quality products.What companies are you talking about specifically? The best convector heaters are offered by such manufacturers: NOBO, Electrolux, UFO, Saturn, Timberk.

Electric convectors "Timberk" - heating equipment of a new generation, equipped with heating elements with an increased area

Consumer reviews about the thermostat in the design of the convector

If you decide to purchase an Electrolux convector, the instructions for using which were presented above, it is important to take into account the fact that the thermostat, which is part of the described equipment, is responsible for maintaining the required temperature inside the building. By visiting the store, you can choose a model with an electronic or mechanical thermostat control. Those consumers who want to save money purchase devices with a mechanical thermostat, since it reduces the cost of construction. However, in this case, you should be prepared for some inconveniences, among them - the consumption of a large amount of energy, poor temperature control, as well as characteristic clicks when turning off and on. As experts advise, it is best to purchase wall-mounted convectors "Electrolux", which have electronic thermostats. They, of course, outperform mechanical ones.

How to choose an economical convector for a summer residence, criteria

When choosing a heating electric convector, first of all, the following are evaluated:

Electrical power

The power of the convector is selected depending on the intended area of use. If the equipment is used as the main heating system, the capacity of the installation is calculated based on the ratio of 1 kW per 10 m2 of heated area. To the calculated value, add 15 - 20% for possible heat losses.

If the device is used as a backup system, the convector power can be significantly lower. The exact value depends on the characteristics of the main heating circuit, the quality of the building's thermal insulation and the outside temperature. As a rule, the power of such convectors ranges from 150 to 500 W.

Thermostat type

Both mechanical and electronic thermostats are used in the design of modern electric convectors. Devices with mechanical adjustment are simple and reliable, but the functionality of such convectors is minimal.

The use of electronic control units ensures precise adherence to the set temperature regime, the possibility of remote and software control, and also allows you to connect additional functional modules.

The use of electronic heating convectors is advisable as the main heating system. For a redundant system, it is more profitable to purchase an inexpensive convector with a bimetallic thermostat.

Heating element type

Electric convectors can have heating elements of both open and closed type. When using an open-type heating element, there is a high probability of burning out oxygen, and in addition, corrosive destruction of the wire spiral is possible under the influence of natural air humidity.

In closed-type heating elements, the filament is placed in a sealed tube with special aluminum fins designed to increase the efficiency of heat transfer. The use of such heating elements completely eliminates oxygen combustion and corrosion. Despite the higher cost, it is the closed heating elements that are most widely used.

Additional functions

As a rule, additional functions are available for convectors with an electronic control system, they are extremely rare in "mechanical" convectors.The most requested additional features include:

Anti-freeze mode. When this function is enabled, the unit automatically maintains the room temperature at +5 C, preventing the building from completely freezing in the absence of the owners;
Work in the programmed mode. The option allows you to automatically change the temperature mode in order to save energy. For example, in the absence of the owners, the convector can operate in the minimum heating mode, and at a certain time, an hour or two before their return, the device switches to the optimal temperature mode.
The remote control makes operating the device comfortable.
Switching the convector on and off using a timer allows you to significantly reduce energy consumption.

Device security

To ensure safe operation, the convector must have a number of basic protective functions:

Reliable protection against moisture ingress;
Turning off the heating element in case of overturning will avoid a fire;
Turning off the heating element in case of overheating of the device;
Protection against freezing, which consists in maintaining the temperature within +5 - 7 C in autonomous mode in the absence of owners.

In addition, if the convector is installed in a children's room, the presence of sharp edges and corners that could injure the child are unacceptable.