Monlan aluminum radiators - Monlan radiators (Monlan) - reviews and opinions on aluminum and bimetallic radiator models

Review of heating batteries of the Chinese manufacturer Monlan

When arranging a heating system, one of the important links in the chain is the batteries, because it is from them, with the help of the carrier, the energy flow emanates, thanks to which the room is reliably protected from the cold. Monlan aluminum and bimetallic radiators from a Chinese manufacturer meet almost all the requirements of home and apartment owners. This is evidenced by consumer reviews based on quality and performance characteristics and a very reasonable price.

Description of the model range and features

Monlan batteries for heating combine all the best properties. Products are manufactured by high pressure casting. The manufacturer uses steel pipes, so they quickly heat up and transfer energy into the space. The low weight makes it easy to transport and install the batteries. There are two types: Monlan bimetallic and aluminum radiators.

The special shape of the housing of both types contributes to a high level of heat transfer during heating. The equipment can withstand pressure of 20-40 bar well, which provides reliable protection against cracking. The distance from the upper to the lower manifold is 500 mm, which is the same for all models. The batteries operate at media temperatures up to 95 ° C, power range - 150-200 watts.

Heating radiators Lammin: product reviews

The Finnish company Lammin is famous for its high-quality bimetallic and aluminum radiators.

All Lammin radiators are divided into two series:

• Eco;
• Premium.

But regardless of the serial number, all devices from this manufacturer are reliably protected from corrosion and guarantee a long service life.

Lammin aluminum batteries are quite heavy, but can provide maximum heat dissipation and power.

Buyers Feedback:

• There was a need to replace my old batteries. I decided to opt for the Lammin bimetallic radiator. It hung next to a very expensive device that almost all the sellers recommended to me. But Lammin, neither in weight nor in appearance, was inferior to its competitor, despite the fact that its price is almost 2 times less. I bought it. I didn’t regret it. Works great. Great quality for a small price. (Alexey, Belgrod)
• I have long wanted to change my batteries for more stylish and modern ones. I thought for a long time, but finally decided to order a Lammin radiator. I liked the price and delivery terms. They arrived quickly, the goods are in good condition. The apartment has become very warm and cozy. Moreover, the temperature can be regulated, as there are special valves. The design is excellent, the room looks very neat. I am satisfied. (Marina, Lugansk)

Aluminum hardware

Such devices tend to give off heat in two ways: in the form of radiation and by convection. Heating of the room starts 10 minutes after switching on. Manufacturing by casting means manufacturing each section separately. Monlan aluminum radiators are made of a special alloy with the addition of silumin, while the silicon content does not exceed 10%, which is quite enough for strength. The assembly takes place on the factory conveyor, the products are sold with an even number of elements.

The result is sections of different shapes, with thick walls, capable of withstanding from 5 to 15 atmospheres during heating. For free passage of the medium, the channels in the batteries are widened. The inner part is made of vertical and horizontal collectors. This approach completely eliminates the contact of water with the shell of aluminum radiators.Thanks to this, the devices are maximally resistant to hydraulic shocks that occur during heating.

To find out the heat transfer coefficient, you need to multiply the indicator in one section by the number of Monlan battery cells. If the value is about 150 W, then a 6-piece equipment will give a parameter of 150x6 = 750 W. This helps to maintain inertia and reduce costs, since you need to heat water at a lower temperature. The most popular types:

• Monlan's 350/80 aluminum radiators have a thermal output of 190 W, a maximum operating pressure of 16 bar, and a pressure test of 24 bar. The number of sections in the model is 10 with lateral connection method. The volume of water in the radiator is 0.36 liters.
• Batteries made of aluminum of the Monlan 500x70 brand of 6 elements. Thanks to the original design and compactness, they fit well into any interior. The design is dust-free and easy to clean. The power is 150 W, there is a side connection.
• Aluminum radiators from the manufacturer Monlan 500/96 for 8 sections. Suitable for heating any room. Casting technology provides strength. The heating power is 200 W at a pressure of 18 bar with a water volume of 0.4 liters. Judging by user reviews, the advantages are low cost and original design.

Such equipment has high quality and performance characteristics, provides comfort in rooms when heated. Read more about bimetallic radiators.

• The aluminum casing is designed to distribute heat evenly over the area of ​​the unit. Monlan bimetallic radiators contain a steel core that can withstand high pressure and protect the media from aggressive environments.
• The casting method allows the production of batteries of various shapes. The inner element can be located in any part of the structure. If the core is in a vertical channel, the radiator is considered semi-metallic. In this case, the characteristics exceed those of similar models, and their cost is much lower.
• Placing the core in a horizontal channel ensures continuous movement of the media without contact with the surface, which ensures the strength and reliability of the batteries.
• Each section transfers energy when heated by radiation and convection. The working pressure is designed for a maximum indicator of up to 30 atmospheres, which makes it suitable for use in district heating systems.
• Bimetallic radiators operate at temperatures up to 90 ° C with a power of 200 W, the average liquid volume is about 2 liters. The disadvantage is the inability to use antifreeze as a carrier.
• Models of the Monlan 500/80 brand have a different number of sections - from 6 to 12. Due to strict geometric shapes and high heat transfer, dust does not accumulate on the surface. The elements are 570 mm high, 80 mm deep and 82 mm wide.
• The bimetallic radiator Monlan 500/80 is reliably protected from water hammer, thanks to the design features. According to customer reviews, the equipment has the best performance and an affordable price. Good convection, safety of use, safety margin, original design also speak in favor of such devices.

Reviews of the aluminum radiator 500/96

By choosing this radiator model, you will pay 3760 rubles. in 8 sections. This device is made of aluminum and is used for heating premises for various purposes, including:

• residential;
• public;
• production.

The battery is not afraid of serious breakdowns in the centralized heating system. Considering the reviews about the Teplomir 500/96 radiator, you can note for yourself the main advantages, among them:

• reliability;
• strength;
• excellent thermal conductivity;
• versatile design.

The radiator can provide a different number of sections. The equipment weighs 9.4 kg.The width is 800 mm. The height is 580 mm. Depth - 96 mm. The power is equivalent to 1.49 kW. You may need a diameter to connect, it is 1 inch.

User opinions

Reviews of aluminum and bimetallic radiators from the Monlan company indicate that the units can be purchased without fear of encountering poor-quality work:

“When moving to a country house, it was necessary to put the heating system in order. Old batteries are rusted and worn out. Since the budget was limited, they were looking for inexpensive but good products. Friends advised the Chinese company Monlan. Judging by their reviews, these products combine a high level of heat transfer and low cost to the maximum. We decided to buy alloy radiators. For two years now, they have been working properly, heating the house, there has not been a single breakdown. ”“ I bought Monlan equipment for my parents. I was very worried that it would be of poor quality, but the batteries do an excellent job. The heat is distributed evenly. Aluminum does not get very hot, so the devices are safe. During operation, no shortcomings have been identified. To regulate the flow and save money, I installed a pump. To protect against scale and deposits, reliable filters are installed in the system. Now all that remains is to carry out preventive maintenance on time. ”“ I decided to change the old cast-iron batteries, as they had rusted and leaked for a long time. To buy the most suitable option, I ran through user reviews. After that, it was decided that it was better to choose bimetallic devices because of their reliability. The products of the Chinese company Monlan suited me at a cost, it only remained to calculate the required number of sections. Guest wizards helped with planning and installation. The radiators have been working perfectly for three years. They have a great design that decorates the environment. ”“ We live in a private house, because of the poor quality of water with many impurities, the heating equipment was constantly breaking down. Therefore, we decided to replace everything with improved devices. It was necessary to buy high-quality batteries for the boiler and pump. Judging by the reviews, bimetallic devices have the best characteristics. In order to save money, we chose Monlan, their radiators were installed in the living room six months ago. The situation has improved significantly, the inner shell and filters withstand the media very well. Now we will buy the same designs for the nursery and other rooms. ”“ When choosing radiators, we could not decide on a suitable model for a long time. The budget did not allow for serious expenses, but I wanted to buy an option with better characteristics. Monlan is a company that guarantees a combination of low price and quality. We have seen this from our own experience. Aluminum batteries have been serving well for three years already, there are no complaints, the heating is uniform, the rooms are comfortable even in severe frost. "

Monlan - radiators with good heat dissipation.

Parents live in the village, the house is already quite old. We began to slowly make repairs and restore the dwelling to its previous appearance, so I decided to give them a gift and help in the repair. In Leroy I looked at the Chinese radiators of the Monlan company, and bought them since the budget was a little limited. Initially, I was very worried after the purchase, listened to my friends and decided that for such a price one should not expect good things.

But in the course of operation, the radiators turned out to be at their best, after three years of use, there are no complaints. The house is always warm and cozy, the design of the batteries themselves was very much liked by my mother, which is especially pleasing. We installed sections under each window for reliability. I bought an additional pump for the heating system, you can regulate the heat supply, it is convenient.

In general, I like everything, already the neighbors of their parents have begun to install such for themselves.

Read more: HBO 2 generations on a carburetor with your own hands

Opinions about Montlan heating radiators

Monlan bimetallic and aluminum radiators have won recognition among consumers for their design features.They are made by extrusion, which provides a high margin of safety and, as a result, - the duration of operation. Judging by the reviews, the radiators are made in a modern style, which allows them to harmoniously fit into any interior. They are absolutely safe for human and pets health.

Features and characteristics

In the process of manufacturing the cores, steel pipes are used, therefore, when the coolant enters, the radiators quickly heat up and transfer heat to the surrounding space. And due to the use of aluminum, they are very light and, in comparison with cast iron, they are extremely easy to transport and assemble. Also, as evidenced by reviews of Monlan radiators, the special shape of the case, in addition to decorative functions, contributes to an increase in the heat transfer of the heating system.

The device is capable of withstanding a pressure of 15–35 bar, which excludes the possibility of cracking on it, moreover, the maximum permissible value of this value in autonomous heating systems is 10 bar, and in centralized ones - 14. The center-to-center distance (from the upper to the lower collector) is standard for all radiators and equals 500 mm. The equipment can withstand the temperature of the liquid circulating through it up to 90 ° C. Power 150-190 W.

“Last year, as part of the repair, I decided to replace the old cast-iron batteries at the dacha with bimetallic Monlan companies. On the advice of the seller, I additionally took a pump for the heating system - now it is very easy and convenient to regulate the temperature, which is especially important despite the fact that I do not come there often. First of all, I appreciated the savings on the purchase of the radiators themselves and the cost of heating. "

Maxim Saveliev, Kazan.

“After reading the reviews, during the installation of Monlan, I decided to put a branch pipe at the point of connection with the pipe, and on the opposite side - a plug with a Mayevsky tap. Due to this, the radiators are not air-conditioned and they warm up well. And I looked at the dacha with a model with a thermostat mounted below, which helps to change the intensity of heating of radiators. As for me, Monlan is one of the best brands of heating equipment available on our market. "

Vasily Iglinov, Ryazan.

“I doubted buying these radiators for a long time. After all, the manufacturer is China. But the budget was extremely limited, and my wife liked the design. I immediately noticed that they are easier to clean, in contrast to cast iron. They took from the calculation: 1 section of the radiator per 2 m2 of the heated room, as a result, 12 ribs were just enough. We gave only 4,200 rubles for the aluminum version. The heat transfer is really high - I did not expect it for such a price. There are no complaints to this day - I recommend it to everyone! "

Oleg Vishnevsky, Moscow.

“I had to replace the old batteries, because the water in our area is of very poor quality, which is why they were constantly leaking. Based on a review of information on the network, I settled on bimetallic Monlan, - users wrote that a coolant of any composition is suitable for this type, because the material does not react with anything. And now they have been functioning properly for 1.5 years. During this time, I have not seen a single hint of rust or condensation. I will definitely install it in the children's room as well ”.

Ivan Klinko, Moscow.

“I finally decided to update the heating system in my Khrushchev. My husband and I took a bimetallic radiator Monlan 500 × 80 mm for 8 sections for 3,000 rubles - just enough for a room of 16 m2. A familiar plumber was engaged in the installation, and it took him only 1.5 hours. In the first month, a heavy angular pot of flowers was accidentally dropped on the radiator, but it did not damage it in the least. The enamel, which covers the equipment, is really excellent strength! ".

Elena Zagodornaya, St. Petersburg.

Main characteristics of Monlan bimetallic radiator

Let's talk about heat dissipation. This indicator displays the heat that the radiator gives off at the existing water temperature, as well as at an additional seventy degrees Celsius.Bimetallic radiators have 170-190 watts. These indicators are worthy of attention! It is interesting that the process of heat transfer is carried out both due to the heating of the air environment, and with the help of a convention due to the design features of the battery.

Let's touch on the pressure indicator. The bimetallic product is capable of withstanding 15–35 bar. Much depends on which manufacturer the product is released by. If the house has a centralized heating system, then the pressure should not exceed fourteen bar, and as for the autonomous system, ten bar. In order to avoid the appearance of cracks under the influence of pressure, the manufacturer is obliged to indicate this characteristic with a margin.

Let's talk about the center distance. This is the distance between the upper and lower collectors. These figures are standard. The batteries are produced in five different versions, which makes it easier to choose the product that best suits the given heating pipe layout. The most popular is a bimetallic radiator monlan 500 × 80 mm.

What temperature can bimetallic batteries withstand? Up to ninety degrees. It is important to remember this. In addition, the heat transfer coefficient depends on this.

The next characteristic is reliability indicators. They are at a height, so the presented radiators can be safely used even for more than twenty years!

When choosing a radiator, it is important to carefully look at the passport for it. Particular attention should be paid to such characteristics as heat transfer, pressure, center distance, limiting temperature, reliability indicators, ease of installation, durability.

Disadvantages of Monlan radiators

Main characteristics of Monlan bimetallic radiator

Another significant drawback is the effect of corrosion due to the fact that water and air at the same time act on the steel core. This can be especially observed during repairs, when it is necessary to drain the liquid from the heating system. Also, rust acts under the influence of antifreeze, which may be in the communications of a small house. In such situations, it is best to use solid or aluminum radiators.

Varieties

Radiators of the Monlan brand are divided into: aluminum and bimetallic. The former are characterized by high heat transfer, and some of the heat is transferred in the form of radiation, and the other - by convection. They instantly warm up - 10 minutes are enough. Easy to install, lightweight and cheap. Of the minuses, judging by user reviews about Monlan aluminum radiators, - sensitivity to significant ph of water (more than 8 units is considered critical), fire hazard due to the release of hydrogen by the metal due to chemical reactions with the coolant, and fragility.

Monlan bimetallic radiators are made from two different metals. The body is made of aluminum alloy, and the pipes that form the core inside it are made of steel. The latter circumstance has a bad effect on heat transfer, reducing it by several times (when compared with the aluminum analogs of Monlan), however, steel wins in resistance to low water quality and an increase in its temperature (withstands up to 130 ° C). In addition, bimetallic radiators are not as sensitive to water hammer and are easy to install. A significant disadvantage is the price, which is 1.5 times higher than for aluminum.

Bimetallic radiators also differ from each other, depending on the composition. There are types made entirely of bimetal, which implies the presence of a steel core, around which an aluminum shell is located. Such Monlan equipment stands out for its special strength and is mainly represented by the manufacturers Global Style and Royal Thermo BiLiner. The second option is equipped with steel pipes designed to reinforce the vertical ducts. These are the so-called semi-metallic radiators, in which water comes into contact with aluminum. Their heat transfer is 10% higher, and the cost is 20% lower compared to those made of bimetal.These devices are represented by the domestic firm Rifar, the Italian Sira and the Chinese Gordi.

Experts have no consensus as to which type of Monlan is preferable, however, if the coolant is supplied under increased pressure, then it is recommended to buy aluminum radiators. And in the case of the old heating system, bimetallic ones are chosen for reliability. Otherwise, the available budget, frequency of operation, water quality and other factors are taken into account.

Monlan radiators are available in one piece or sectional. The latter are the most popular. During the production process, each section is made separately, after which they are fastened with nipples. The assembly of such radiators is exclusively factory-made. Customers are offered various Monlan variants with an even number of sections. If one of them turns out to be superfluous when installing a radiator, it can be easily removed, which is an undoubted advantage of this type. One-piece devices are standard sizes. Among the main advantages are increased strength and pressure resistance up to 100 bar.

The table provides a brief overview of prices for bimetallic radiators from Monlan and for aluminum, depending on their parameters:

What to look for when choosing

When buying, pay attention to:

1. Power. Shows how much energy the battery can dissipate per unit of time. It is selected depending on the power of the heating system.
2. The number of sections. The rate of heat removal depends on their number. Optimally - eight, ten sections.
3. Manufacturing material. Subjective thing. Buy bimetal, steel or aluminum - you can't go wrong.
4. Weight. Massive (cast iron) batteries require more powerful brackets and proper attention during installation. All other types are lighter and can be mounted on standard hardware.
5. Dimensions. Relevant only in cases of installations in small rooms or in hard-to-reach places. In installation in ordinary rooms, dimensions are not of paramount importance, but rather are chosen for decorative reasons.

Monlan bimetallic radiators

One of the popular ways of arranging heating systems for private buildings, urban and industrial facilities is the use of bimetallic radiators of the Monlan trademark. This demand is due to the excellent technical and operational characteristics. In addition, many users in their reviews indicate that the manufacturer offers to buy Monlan models at an affordable price. Their other advantages are: long service life and aesthetic appearance.

The Chinese company Ningbo Hongyang Heating & Venting Manufacture Co., Ltd has been manufacturing heating radiators since 1995. The assortment initially included aluminum models. Since 2001, the production of heating equipment by injection molding has been launched. Now the production facilities of the company are located on an area of ​​50,000 m2. About 10,000 radiators leave the conveyors every day and are subject to multiple checks. In addition, the products have international certificates of quality ISO 9000, CE / GS and environmental, toxicological safety RoHS.

Sectional radiators of the Monlan brand are manufactured using two components: steel and aluminum alloy. The first is necessary to obtain a core: vertical and horizontal collectors, where the coolant moves. The second is to create heat-dissipating ribbing, which also gives an aesthetic appearance.

Bimetallic sections are manufactured separately at the factory, after which they are connected to finished products by Montlan using nipples.Usually, options with a pair of component segments are offered. An obligatory stage of production is the application of a polymer coating. It protects against external corrosion processes and improves the look.

The use of an advanced injection molding method in the production of bimetallic radiators of the Monlan brand and other technological features determine:

• tight fit of metals to each other, which in turn provides good heat transfer;
• the ability of radiators to function effectively in heating systems with high pressure and withstand water shocks;
• the ability to work with a coolant containing impurities (water with high salt content, solid particles);
• fast high-quality heat distribution;
• reliability and durability;
• compatibility with pipes made of different materials;
• ease of installation;
• applicability in autonomous and centralized heating systems;
• a stylish look that makes the products look good in any interior.

At the same time, it should be noted that their weight is higher, and the heat transfer is somewhat lower than that of analogs made of aluminum. The peculiarities of the technology for the production of bimetallic radiators also cause a relatively high cost. Many experts recommend using them in high-rise urban construction with centralized heating.

“I was doing repairs in the apartment, I immediately decided to change the kitchen and install new radiators in the bathroom. I wanted to take aluminum ones, but my neighbor dissuaded them - he said that they could not withstand the excess pressure in the network. I purchased Monlan bimetallic batteries, among the advantages of which it is worth noting: attractive appearance, good characteristics, low weight (4 sections - about 6 kg), warranty - 15 years. They were assembled by a specialist, it took him about 3 hours. We worked perfectly for the season, now I'm thinking of putting the same ones in all the rooms. ”“ In my parents' house, I urgently had to change the heating system. In the store, the consultant advised me to buy bimetallic heating products of the Monlan brand. It was embarrassing that they were made in China, but they looked interesting and the price was right. I got it and did not regret it. To keep warm even in the most severe frosts, I installed 10-section in the hall (16 m2), in the bedroom (10 m2) - 6. I did everything myself, these bimetallic batteries are very light, they are simply attached. Now the house is always warm and the parents are happy. "
Dmitry Veresov, Voronezh.

“I doubted for a long time which heating radiators to replace the old cast iron ones: bimetallic or aluminum. Both are attractive in their own way. After studying various information (reviews, reviews, articles) and comparisons, I decided to stop at the last option - it still seemed more reliable. I chose Monlan bimetallic batteries for good heat transfer (190 W), reasonable price (290 rubles), aesthetic design. There are thermostats to adjust the degree of heating. The system has been working without problems for 3 years. ”“ I installed bimetallic radiators of the Monlan trademark in a new apartment: in a large room there are 6 sections under each window, in the kitchen - 4 sections. When choosing, I paid attention to user reviews on the forums, characteristics and cost. Additionally, I had to buy mounting fasteners, I also supplied Mayevsky's cranes. Bimetallic radiators have been in operation for 2 heating seasons, so far there are no complaints. Both winters in the apartment was warm, the children were not even particularly dressed and they slept without thick blankets. "

The price of ready-made models of Monlan radiators depends on the number of sections. There are 4, 6, 8, 10 and 12 segment options on the market. The final cost is also affected by delivery, and when ordering a similar service, installation.

The best heating radiators: reviews on the quality of devices

A properly chosen radiator is practically a guarantee that in the cold season it will be warm and cozy in the room.

Conventionally, all radiators can be divided into several groups, based on the material of their manufacture:

• Aluminum sectional;
• Bimetallic;
• Steel panel;
• Cast iron.

In addition to the material, the reliability and quality of the unit are taken into account. There are conventional radiators, and there is increased reliability. Shapes and colors can also vary.

If you figure out which firms are better, then there will be no definite answer here, but you can make a small rating.

So, which companies producing radiators should you pay attention to:

1. VulRAD (Woolrad) - this manufacturer skillfully combines a fairly high quality and affordable prices. The good heat transfer of the sections makes it possible to use these radiators in heating systems with a low temperature of the heat carrier. These units easily fit into any interior and, thanks to the double painting, retain their appearance for a very long time.
2. Global (Global) is a great option for connoisseurs of quality. The devices of this Italian company are distinguished by high heat transfer, excellent design of devices and a ratio of quality to price.
3. Tessen (Thyssen) or Elegance (Elegance) - radiators of these companies are perfect for those who want to save a little. Moreover, such devices are quite light in weight and have a small number of sections, but they do a good job with their functions.
4. Rifar (Rifar) is a popular Russian manufacturer of radiators. All batteries are of high quality and do not take up too much space. At the same time, their price is quite acceptable.
5. Konner (Conner) - This Korean company is considered one of the leading manufacturers of aluminum batteries. High heat output, stylish design, reasonable price. The Conner Modern 500 model is especially popular among consumers.
6. Sira (Syrah) is an Italian battery manufacturer. It represents an excellent ratio of the cost and quality of the product. The devices are suitable for installation in any premises and have a fairly wide range of models.
7. Kermi (Kermi) and Arbonia (Arbonia) are excellent manufacturers of steel radiators. The devices of these companies serve for a long time, look great and differ in their quality.
8. Fondital (Fondital) is an Italian popular company with affordable prices for radiators. This brand is constantly improving its products and is considered to be very competitive.
9. Royal (Royalthermo Revolution - Royal Thermo Evolution) is also an Italian company that produces quality radiators with an average price policy.

Chinese radiator manufacturers keep up with Russia and Europe. By studying the reviews, one can single out companies that have proven themselves well. These are Smart, Gordi, Golf, Breeze, Apriori, Aquaprom, Watson, Stavrolit, Lontek, Elsotherm , Millennium.

Heating radiators Monlan / Monlan

• In stock

• +7 (863) 226-10-76 Rostov
• +7 (861) 290-91-00 Krasnodar
• +7 (862) 291-03-33 Sochi
• +7 (989) 624-33-16 Crimea

• +7 (863) 226-10-76 Rostov
• +7 (861) 290-91-00 Krasnodar
• +7 (862) 291-03-33 Sochi
• +7 (989) 624-33-16 Crimea

• Payment and delivery terms
• Schedule
• Address and contacts

Heating radiators Monlan / Monlan

Monlan / Monlan heating radiators are made of different metals: the aluminum base gives an effective heat flow and even heating of the entire battery case, and the steel core protects the battery from the effects of an aggressive heat carrier and can withstand the high pressure of the system. Each section of Monlan heating radiators is made separately using the most innovative method - pressure casting. This manufacturing method allows you to create a different shape, which gives uniform heat distribution using radiation and convection. In Monlan / Monlan radiators, the section is made of steel vertical and horizontal collectors. This design completely excludes the contact of the heat carrier with the aluminum shell. Thanks to this innovation, Monlan / Monlan heating radiators are maximally resistant to excessive pressure during hydraulic shocks in heating systems. And the exceptional appearance, vertical and horizontal fins of the batteries allow to increase the air passage, which increases the thermal efficiency of the batteries.The steel core of Monlan heating radiators can be in different parts of the battery: only in vertical channels - such batteries are called semi-metallic. Battery performance outperforms aluminum in terms of heat flux and safety. The price of the batteries is twenty percent less than the "real" bimetallic batteries. In horizontal and vertical channels of Monlan / Monlan heating radiators - i.e. permanent pipeline for the flow of the heat carrier without contact with the aluminum base, due to which the degree of protection and durability of the unit is higher. The working pressure of the Monlan / Monlan heating radiator is given for a value up to 30 atmospheres. That is why bimetal batteries are excellently needed for operation in a centralized heating complex. The center-to-center diameter between the inlet and outlet manifolds is five hundred millimeters. A number of sections affect the final heat output of Monlan / Monlan radiators. The battery is assembled on a production line, and the final user is offered to select a battery with an even number of sections - 4, 6, 8, 10 or 12. Monlan / Monlan heating radiators meet the most innovative requirements and have been adapted to the domestic climate in all its forms. All serial heating radiators have a high-quality coating. Elegant and reliable, this radiator will cope with the heating of residential premises and institutions, there is not even a minimal risk of leaks, so this sectional radiator can be freely used in various institutions: in kindergartens and hospitals, in office buildings and other structures.

Radiator Monlan 500/70, 4 sections, aluminum

Radiator Monlan 500/70, 4 sections, aluminum

Rating:

(3).

Number of reviews (5) read reviews.

Do you want to buy on credit? Calculate your monthly payments first! And get great loan offers!

Buy Radiator Monlan 500/70, 4 sections, aluminum You can visit the online store of one of our partners, just click on the blue button above.

We automatically collect similar ads in other online stores for this product. Below you can see this list.

Delivery rules: Delivery of the purchased goods is made to the entrance, dacha, cottage only if there are access roads intended for the passage of trucks. more details

Purchase returns: Have you made a purchase, but changed your mind or incorrectly calculated the required quantity of goods? Within 100 days, Leroy Merlin will quickly and without unnecessary questions take back the purchased goods, which have retained their presentation and consumer properties *, returning their value. more details

Prices in shops for Radiator Monlan 500/70, 4 sections, aluminum

Description

Modern design, lightness of construction and small overall dimensions allow using the four-piece cast aluminum Monlan radiator in any type of premises.

• high thermal conductivity of aluminum guarantees a high level of heat transfer;
• a small volume of coolant (water) in the radiator section contributes to rapid heating, and in a short period of time your room will warm up to the required temperature;
• working pressure of the radiator is 16 atm, which allows it to be connected to a centralized heating system;
• the design is very robust and reliable due to modern technologies used in the manufacture of the radiator.

You can create the most favorable temperature regime in your apartment or office by purchasing convenient, easy-to-use and easy-to-install radiators at a bargain price in the Leroy Merlin chain of stores.

Radiator Monlan 500/80, 6 sections, aluminum

The color in the picture may differ from the actual picture.

4 233 ₽

Price for 1 piece

Pickup on Tuesday 21 January after 15:00.

Delivery to any area of ​​Moscow on Thursday, January 23 after 18:00. Shipping cost RUB 499

Briefly about the main parameters

Other purchase options

Specifications Radiator Monlan 500/80, 6 sections, aluminum