Ventilation of the attic and upper floors of a multi-storey building

Cold attic ventilation: important quality nuances

It is at least wasteful not to use a spacious attic as an additional room, and that is why ventilation of the under-roof space is so necessary
Planning to use your attic space as a living space, but don't know how to make it comfortable? I will talk about how the ventilation of the attic works. With a proper arrangement of the system for replacing stale air with fresh air, you can make the attic suitable for all-season comfortable living.

An example of a ventilation device for supply and exhaust ventilation on a modern roof

1. The comfort of living in the attic. Clean fresh air is one of the main conditions for comfortable living indoors. Therefore, if the room under the roof is used for living, you need to take care of the normal air exchange even at the design stage of the roof.
2. Lack of condensation. Effective air exchange prevents condensation on the windows, which is important if the under-roof space is used as an attic.
3. No mold. Timely replacement of warm humid air with fresh air prevents mold on building surfaces. That is, if the air does not stagnate in the attic, mold will not appear in the corners, regardless of what materials are used for finishing.
4. Long-lasting roofing resource. Excessive air humidity has a detrimental effect on the condition of the roofing material. Moreover, if moist air is not removed from under the roof, condensation will accumulate on the vapor barrier, which can reduce the resource of the insulation. A properly organized ventilation system will increase the life of the roof without the need for repairs.

Attic ventilation as it happens

The best option is a supply and exhaust system that works according to a natural principle, as shown in the diagram.

Under the eaves of the rafter roof, air vents are arranged through which the flow of fresh cold air is provided, while the warmer humid air will go into the skylights or other technological openings in the upper part of the gable or slope.

The preferred option when using modern roofing materials is a counter-grill with ventilation gaps. At the same time, air exchange in the insulated space of the attic is arranged separately, by means of a supply and exhaust system.

Keep in mind that ventilation in the attic must be planned and built as a complete system. That is, the project needs to provide for an air exchange system both in the attic and in the under-roof space, as well as pipe insulation and insulation of other communications. In addition, the ventilation design must be carried out taking into account the type of thermal insulation materials used.

Types of ventilation attic

The disadvantage of the system is excessive dependence on the temperature outside the house. That is, in the warm season, ventilation will be weak.

The advantage of the forced system is that it does not depend on climatic conditions: the exhaust air will be removed with the same efficiency both in winter and in summer.

Methods for venting air to the outside

Under the ridge bar on a pie made of corrugated board or metal tile with their own hands, a vent is arranged, covered with a mesh. The ventilation device is such that the condensate formed in the cold season will not drain into the room, but will flow out onto the slope.

The peculiarity of the solution is that the windows are constantly open, regardless of the season. In order to prevent the entry of animals and birds, decorative grilles are installed over the windows.

The advantage of special aerators over a conventional pipe embedded in the roof is a special design that prevents the formation and penetration of condensate into the room.

There are manual and automated valves on sale.

Ventilation of the attic: an overview of current schemes and methods of their implementation How to make ventilation of the attic? Read about the schemes and installation methods in the article

When modeling an attic in a private house, it is necessary to create good ventilation. Properly installed ventilation in a cold attic is important to ensure a healthy indoor climate under the roof of your home. With insufficient aeration, the service life of the structure is significantly reduced.

No amount of house sealing can completely isolate steam from the dwelling to the attic. According to the law of thermodynamics, warm air rises upward, and steam finds a way out in any case. The slabs are mainly made of wood. When moisture accumulates on wooden surfaces, a natural environment is formed for the development of various harmful microorganisms, mold. Unpleasant musty odors and a feeling of dampness appear. An unhealthy indoor climate is created as a whole.

Changes in temperature contribute to constant condensation and, if there is no ventilation in a cold attic, rapid deterioration of the structure occurs.

Reasons for the appearance of condensation:

• lack of good ventilation,
• violation of roof insulation,
• insufficient waterproofing,
• lack of ventilation ducts,
• marriage in building materials.

Ventilation, performed in accordance with technical rules, protects the building from damage.

A cold attic is a non-residential space under the roof of a building without decorative finishes. The issue of ventilation is important to solve during the creation of a house project, when planning the features of the roof configuration.

The main task of ventilating a cold attic is constant air exchange. In order to achieve this goal optimally, it is necessary to assess the quality and type of the used roofing material. Each of them has its own peculiarities.

If slate or ondulin is chosen for laying the roof, then the air easily moves between the wavy bends into the attic and also freely goes out.

When creating ventilation of a cold attic from a metal tile, it is important to lay a vapor barrier film, as condensation forms. The metal tile is ventilated through the ridge seal. For a gable roof, ventilation channels are located on the gables. High-quality ventilation is carried out with a uniform distribution of gaps.

There are nuances when installing a hip roof. In this case, the inlet should be located in the filing, and the outlet should be near the ridge. This type of roof is four-pitched and there are no gables.

When working with shingles, it is required to install a ventilated ridge, for classic "ceramics" - a roof valve.

Using overhangs of wood bars in the filing, an interval of several millimeters should be observed. When sewing with plastic, holes are made in the elements. Hemming is called soffit.

Correct air exchange is essential to:

• avoid the accumulation of vapors that come from home,
• protect the wooden frame of the attic from moisture,
• counteract the formation of fungus,
• maintain a constant temperature.

Provided that ventilation of the attic space is created - a cold attic from the house, the accumulation of moisture cannot be avoided. A thick layer of condensation quickly forms on uninsulated roofs.Even if the roof was insulated, condensation could not be avoided, but in this case the walls of the house would become wet.

The question often arises: can ventilation be brought out to a cold attic?

It is possible to withdraw, but this type of ventilation is the wrong decision and leads to a violation of the microclimate of the attic space, damage to the wooden structure, gradual decay, and inevitable wear and tear.

Important recommendations for the ventilation of a cold attic to be of high quality and durable:

1. Install the necessary ventilation elements to protect air vents from debris, leaves of branches and insects - on skates, cornices, ridges, valleys.
2. Protect ventilation gaps from dust.
3. Regardless of the characteristics of the roof, the area of ​​the ventilation channels should be 400-500 cm2 / m2.
4. Check if the ventilation ducts are not constricted to avoid condensation due to insufficient air circulation.
5. Use auxiliary ventilation structures if the length of the roof covering is more than 10 meters.
6. Avoid widening the gap significantly, as the resulting turbulence reduces air exchange under the roof.
7. Provide ventilation insulation in the attic so that the ventilation system pipes are not exposed to temperature extremes and can function smoothly.

Read more: The difference between an inverter air conditioner and an ordinary air conditioner advantages and disadvantages of each type which design is better
Ventilation of a cold attic: important nuances of quality Ventilation of a cold attic largely depends on the type of roof. Ondulin, slate, metal tiles dictate different rules for quality work.

At the design stage of the future home, it is important to think not only about the convenient layout of the premises. Coziness in the house cannot be provided for a long time if you do not pay attention to such an important point as the ventilation of the attic in a private house. This is no less important than the insulation of the attic, because the lack of well-designed ventilation will lead to the fact that living in the house will soon be uncomfortable, and the service life of the house will be drastically reduced.

Lack of ventilation can lead to a reduction in the life of the roof due to the appearance of mold on it, and in the house itself you can not hope for a comfortable stay. In the summer, when the roof heats up and its temperature becomes more than 100 degrees, it will be very hot in the house, and at low temperatures, condensation will form in the attic, due to which the wooden roof structures will rot.

The main purpose of the ventilation system is to provide heat exchange. The temperature of the air and the roof is mixed, and as a result, a comfortable microclimate is created in the house.

Let us consider in more detail the situation when the ventilation of the attic is bad, or there is none at all.

In winter, part of the heat from the room still leaves even through a high-quality insulation. At the same time, the roof heats up, and unevenly, only above the room. Here the snow begins to melt and flows down to the edge of the roof, where it remains cold above the overhang. Ice that forms on the eaves of the roof does not allow melted snow to drain, and it begins to penetrate under the roof.

Ventilation of a residential attic with skylights

Cabinet in the attic

It will be impossible to fully use the space of the living attic, called the attic, without a well-designed air exchange. The living space should be provided with fresh air, at the same time it is necessary to remove the exhaust.

In the process of human life, moisture is constantly released: with breathing, during cooking, washing dishes and washing. According to the laws of physics, warm and humid air rises to the ceiling of the attic. He “looks for” the smallest cracks and penetrates further: behind the hem, into the insulation. Here, some of the moisture settles.

Insulation - mineral wool, perfectly absorbs water both directly and from saturated water vapor and fog. Wet insulation practically does not fulfill its function. The rest of the steam rises even higher - to the roofing material and here it settles in the form of condensate, which causes corrosion and destruction of the roof.

And even if the attic is non-residential, it is necessary to ventilate it, otherwise microbes and fungal spores develop in stagnant air, the humidity of the room is not regulated. Often, faced with the mass of inconveniences of living in an unventilated space, the owners think about how to make ventilation in the attic.

The importance of proper ventilation

In order for residents not to suffocate from stuffiness in summer, and not to suffer from excessive humidity and cold in winter, ventilation of the attic roofing system is required.

• The task of ventilation of the attic roof is to prevent the accumulation of moisture in the roofing cake. The insulating layer remains dry, that is, all its insulating qualities are preserved;
• In a ventilated space, mold and mildew do not colonize, destroying wooden rafters and battens;
• Good air exchange under the roofing material does not allow it to heat up even under a very hot sun;
• With constant air movement, condensate does not accumulate on the roof, which quickly destroys the metal tile. For ceramic tiles, constant contact with water is also bad: soaked in water, it can burst during frost;
• With good ventilation, the attic cornice will not be covered with icicles;
• Air exchange in the under-roof space ensures uniform melting of snow on the roof, preventing the formation of ice;
• Costs for space heating in winter and cooling in summer are reduced.

It's no secret that a cold, little-used attic is a great place to set up a full-fledged residential floor. If you reformat the attic a little, then it will turn out to be a full-fledged office, a bedroom or a cozy place for the implementation of any creative ideas. The bizarre geometry of wall structures and ceilings gives such a room a special charm.

However, there is one problem: most customers refuse such an undertaking due to the mass of difficulties at various stages of the alteration, including during the installation of the ventilation system. Many believe that builders often deceive their clients when arranging ventilation by charging too high a price for their services.

And in order not to overpay for the help of professional craftsmen, folk craftsmen start reworking on their own. But they refuse the stage of arranging ventilation equipment, considering that it is a waste of time and money. Perhaps this approach is explained by outdated stereotypes and the fact that several decades ago all kinds of aerators, spotlights and other parts of the ventilation system were not sold on the market.

Many houses built in the 20th century have been perfectly preserved to this day, but this has nothing to do with the lack of proper ventilation. On the contrary, their design is made in such a way that the air circulates independently through the attic space, eliminating fungal manifestations, mold and other troubles.

Moreover, in such buildings there are no specially equipped additional floors intended for permanent residence. There are no thermal insulation layers in such buildings, and the attic maintains a low temperature and has many gaps, slots and additional dormer windows for stable circulation of air masses.

The natural ventilation system directly depends on the correct installation of the insulating materials. A prerequisite for laying insulation is the presence of ventilation spaces between the layers of the material used and under the roof surface.Natural ventilation is based on the creation of natural draft, due to which there is a constant flow of air masses.

Under-roof natural ventilation option

The size of the gap for free air exchange depends on the roofing material used for the roof:

• when using metal tiles, tiles, metal profiles, the gap should be more than 25 mm;
• when using soft materials and flat products, the space for air flow should be more than 50 mm;
• when installing waterproofing and insulation, the space between them should be from 20 to 30 mm.

Read more: Drawings and dimensions of the toilet in the country with their own hands. Drawings of the toilet Hut and Birdhouse. Video

The installation of the dormer is carried out in accordance with SNiP II-26, SNiP 21-01:

• installation of dormer windows is possible with a roof slope of more than 35 degrees;
• the minimum size of the flaps is 0.6x0.8 m;
• the permissible size of dormer windows is 1.2 x 0.8 m.

The shape of the dormer windows in a private house can be different and depend on the style of the building. Dormer windows are mounted using frames during the construction of the roof, making up an integral structure. Dormer ventilation improves the roof's aesthetics and functionality.

The format of the dormer window depends on the style of the building.

For a pitched roof, single sloped windows are ideal. Installation scheme: 2 beams are located at the distance required by SNiP and are fixed using vertical posts connected at the top with a jumper. The outer sides are sheathed with facing material, a decorative grille is installed on the side of the facade.

When installing forced air exchange, a fan is installed in the ventilation duct. It is especially necessary to install the device in the presence of short ventilation ducts that are not able to provide high-quality traction. When installing a fan in a country house, the air flow is mounted in the same way as in a natural system.

The scheme of forced ventilation of the building, including the attic

The performance of a rooftop fan depends on:

• impeller dimensions: larger diameter - higher productivity;
• the angle of bending of the blades: the larger it is, the more air will be processed;
• power of the electric motor.

The best way to improve performance is by installing multiple fans. Using a powerful cooler is impractical.

The attic ventilation system is a very important element in creating a comfortable environment in the house. It must be installed in accordance with the regulatory requirements of the construction industry. As a rule, the ventilation system is developed at the design stage of the building itself and is installed at the time of the roof construction.

Attic ventilation is a more complex design than a cold attic ventilation system. The layers should be located between the rafters, and the space between the bottom and top surface of the insulation and the heat retaining material should be at least 2-3 cm.

It is difficult to make attic ventilation with your own hands, however, having the necessary theoretical knowledge and skills is quite possible. One of the common difficulties is the situation when the depth of the used rafters is not enough to provide the required gap between the materials. In this case, additional space is created by boards and battens.

This is easy to do on roofs of simple shapes. However, if your attic is not standard, then the best way out of the situation would be to use special diffusion membranes.Their advantage lies in the fact that they will provide high-quality ventilation of the room even if they are located directly on the thermal insulation layer.

You can add space in the ventilation system in the attic with your own hands. This can be done using a special crate. Its thickness should be at least 5 cm. In this case, the air for ventilation will be taken through special soffits, and leave the room in a standard way - through the end of the roof.

Attic ventilation schemes and options

The specific type and scale of the ventilation system (more precisely, its selection) for the attic depends on several factors. Consider the following factors when planning the scheme of how to make the attic ventilation:

• is it a residential attic or not;
• insulated or not;
• how often people will be there;
• what is its size (is it big or not).

There are no universal ways of organizing a ventilation system for an attic; in each case, one should proceed from the factors listed above.

Natural, with aerators

The effectiveness of the natural type of ventilation for the attic directly depends on how accurately ("according to the textbook") the insulation materials were installed. The main and mandatory rule for laying insulation materials is to leave ventilation spaces in the interlayer segments of the material used and directly in the under-roof area.

It is necessary to do ventilation of the attic even at the stage of roof construction.

Simply put, there should be a free ventilation space both between each layer of the applied insulation, and directly under the surface of the building's roof. The mechanism of operation of natural ventilation is based on natural (which is natural) draft.

Natural draft easily provides a constant supply of fresh air from the outside. In this case, the total area of ​​ventilation ducts should be about 0.2% of the entire area of ​​the attic. In most cases, it is advisable to use the ventilation installation option, in which the outlet of the ventilation ducts is carried out through the gables.

Natural with dormer windows

When implementing this ventilation method and installing dormer windows, one should be guided by the standards prescribed in SNiP 2-26 and SNiP 21-01. These standards state:

• installation of dormer windows is allowed only with a roof slope of at least 35 degrees;
• the minimum dimensions of the flaps should be 0.6x0.8 meters;
• the regulated dimensions of the dormer windows are 1.2x0.8 meters.

The shape of dormer windows installed in a private building can be of a wide variety of shapes, and ultimately depend on the general style of construction. Installation of skylights is carried out using frames at the stage of roof construction, together making up a single structure.

The ventilation system based on the use of skylights significantly improves the aesthetic appearance of the roof and also improves its basic functionality. In most cases, for a pitched roof, the best option would be to use windows with 1 inclined plane.

The installation scheme is quite simple: 2 beams are attached at the distance required by the regulations and then fixed by means of vertical posts, which are joined at the top with a jumper. Then the outer sides should be sheathed with cladding, and at the end on the side of the facade a decorative (with any style at the discretion of the building owners) grille is mounted.

Forced, with an exhaust fan

Given the relatively small area of ​​the vast majority of attics, they do not need a forced flow. In about 95-99% of cases, it will be sufficient to install a forced exhaust system.

How to make an inflow depends on a number of circumstances, but in most cases the classic scheme is suitable.In the classical scheme, the supply system is organized through gaps, windows (due to micro-ventilation or simply opening a window, through a comb), window valves, or through the air duct system, if any.

Attic ventilation system diagram

Air supply

And if there is no good ventilation in the attic room or it does not work well enough, this will certainly entail unpleasant consequences.

These include the following:

1. 1. Development of sustainable musty air.
2. 2. The appearance of putrefactive formations.
3. 3. The appearance of mold on the ceiling and on wall structures.
4. 4. Rotting of the roof structure.
5. 5. The appearance of condensation on the heat-insulating layer.
6. 6. Formation of icicles that hang over the roof in the cold season.

The lack of balanced air circulation will entail a violation of the microclimate in the room, which will turn it from a comfortable home corner into a breeding ground for all kinds of infections and bacteria. Moreover, an unpleasant odor will appear in the building, as well as mold and mildew.

However, these are not the worst consequences of the lack of ventilation. Prolonged exposure to dampness and fungus on the roofing cake will cause deformation of wooden surfaces, wetting of insulation and other unpleasant problems. If putrefactive processes begin to develop in the wood, this will lead to its complete destruction and the collapse of the entire roof.

A ventilated grill in the pediment is used to exhaust air from the attic. It is used for unexploited cold attics. Suitable for hip, sloped and gable roofs. These grilles are open all year round, which ensures constant extraction and removal of air from the attic.

A special roof ridge is the most versatile method used for both warm and cold roofs.

In this case, a special lattice is created on the metal tile or corrugated board under the ridge strip. Thanks to this design, condensation that will form in the cool season will not enter the room, but will drain down the slope onto the roof.

Special skate

Special aerators are additional elements that are installed directly on the roof and serve to remove exhaust air from the under-roof space.

Attention: special aerators allow not only to effectively remove the exhaust air, but also prevent the penetration and formation of condensation.

In the aerator, air is discharged quickly enough through the ventilation hole in the roof due to the special design of the element.

Roof aerators
Advice: the aerator can be installed in the case when a private house has been in use for a long time, and ventilation for the attic was not provided or is not efficient enough.

Elements such as eaves vents provide fresh air under the roof. The installation of the air vents is carried out vertically, as shown in the photo below, and a bar for the cornice with small gaps is installed on top of them.

Air for cornices

Please note: with proper installation, the vents for the cornices not only provide ventilation of the attic floor, but also effectively drain condensate.

Ventilation spotlights are special barriers that provide fresh air flow.

Installation of spotlights is carried out at the lower end of the overhang with the help of special barriers.

Soffits for ventilation

The more often the vents are installed in the soffits, the more efficient the flow of cold air into the attic and under-roof space will be.

Is ventilation of the attic floor necessary, and why

It is imperative to equip a ventilation system in the attic space, since it allows you to solve several very serious problems with the microclimate at once. At the same time, you can equip it with your own hands with a relatively small budget for work.

Consequences of lack of ventilation in the attic

Properly done attic ventilation solves the following problems:

1. Elimination of excess moisture and prevention of dampness in heat-insulating (insulation) materials. That is, ventilation protects thermal insulation materials from wear and tear and functional damage.
2. A significant reduction in the likelihood of the appearance and accumulation of colonies of fungi and mold, which creates additional protection for wooden roofing items (and also protects the health of those living in the building).
3. Protection against the drift of too hot air masses into the building during periods of intense heat (heat) in the external environment (on the street).
4. Protection against moisture accumulation, and, as a result, protection of corrosive phenomena that can damage metal structures.
5. Protection against the appearance of icicles under the eaves in winter (especially in severe frosts).
6. Significant savings in electricity required for optimal heating of the attic for the winter and, sometimes, autumn periods (in general, during the cold season).

How to insulate

The pipe system must be insulated, especially when it comes to designing the ventilation of the attic of a bath or sauna. This is to prevent condensation from accumulating on the inner walls. Due to the fact that the pipe connections are not tight, it is necessary to carry out additional insulation of ventilation in the attic.

The fact is that the appearance of condensation in the ventilation channels is inevitable. People breathe out air, use hot water, wash themselves, etc. - all this leads to the release of an abundant amount of moisture. In special cases, the level of relative humidity can reach one hundred percent, which naturally affects the integrity of both the ventilation system and the attic as a whole.

To avoid this, you need to insulate the pipes using special materials. To do this, you can use foam, mineral wool, various geosynthetics, etc.

Single Vented Gap System

In construction practice, the variant of the location of the ventilated cornice for the passage of air into the under-roof space is in special demand. This approach allows you to achieve maximum efficiency of the entire ventilation system.

Depending on the structural features of the roof, the following techniques are used to equip a ventilated cornice:

1. 1. Installation of a soffit device - a special system of the gap between the floorings of the cornices and the wall structures.
2. 2. Installation of ventilation grilles in the gaps.
3. 3. Installation of special material with air vents above the eaves.

When arranging a valley, you need to adhere to several rules. According to experts, this process is considered the most difficult, which is explained by the specifics of the device itself. It is often referred to as the "roof gutter", which is used for short eaves or for mounting several ventilation system gaps.

Under extreme conditions, air aeration parts are placed throughout the valley. The method is particularly effective in the presence of an acute slope of the roof. On flat structures, additional fans, inertial turbines and high ventilation nozzles must be installed. Unfortunately, this method of arranging ventilation has not gained wide popularity due to the complexity of installation work, the high cost of equipment and the need to pay for electricity costs.

Cornice knot. Proper roof ventilation.

When arranging the ventilation system of a pitched roof, it is worth considering that the size of the ventilation duct directly depends on the length of the slopes and the angle of the roof.

Ventzazor is designed during the development of the roof model

According to SNiP II-26-76:

• the height of the gap is no more than 5 cm, an increase in the indicators of which can lead to the formation of turbulence, which will significantly reduce air exchange;
• with a cover length of more than 10 m, forced ventilation is required;
• ventilation system openings must be reliably protected from debris.

Common misconceptions

There are quite a few stereotypical misconceptions about the design and installation of ventilation systems for attic rooms. Ironically, most people do believe these myths are true. The main ones are as follows.

1. There is an opinion that in the winter season, at negative air temperatures, heat leaves the house through the channels of the ventilation system. In fact, the heat will leave the house through the channels only if the system is designed incorrectly or poorly. The real source of this problem is poor thermal insulation material, which allows humid air currents to pass into the attic. Consequently, this leads to the formation of condensation, which in turn affects the integrity of the roof.
2. Some people believe that the ventilation system is only relevant in hot weather. In fact, it works any time of the year. In hot weather, the system promotes air circulation, which prevents stuffiness from forming. In winter, when the relative humidity is high, it prevents the formation of fungus and icicles.
3. Very often, in the process of designing an attic ventilation system, people do not pay due attention to the size of the ventilation holes. As already mentioned, it is possible to create a high-quality, high-quality project only with correct calculations. With a random choice of the size and location of the holes, the ventilation efficiency will most likely be zero. The average air-to-floor ratio should be 1 in 500.

Attic ventilation functions

A living attic cannot be without good air exchange

The ventilation system during a particularly hot period allows you to eliminate stuffiness, but in winter it effectively prevents cold and moisture from entering the room. That is why an important point is the correct installation of the ventilation system with your own hands, because:

• the system removes moisture and prevents the formation of dampness in the insulation material - it is thanks to ventilation that the heat insulator retains its functionality for many years, preventing the penetration of heat and cold;
• with properly created ventilation, the formation of fungus and mold is minimized, thereby eliminating the possibility of premature destruction of wooden roof elements;
• in extreme heat, it prevents hot air from entering the house;
• prevents the accumulation of moisture, thereby preventing corrosive manifestations that negatively affect the metal tile;
• eliminates the formation of icicles under the eaves in severe frosts;
• saves energy, thereby reducing the costs required to heat a residential attic in the winter.

Ventilation of a residential attic with skylights

In case of insufficient ventilation of the attic, the option of arranging a dormer is also considered. The design can have different shapes, since it performs not only a ventilation, but also a decorative role. Gable models are suitable for metal or soft types of roofs, single-pitched - for roofs of a wide variety of materials.

This type of ventilation equipment is not cheap, but it is justified by the excellent air circulation and attractive design. The main task of the dormer is to ensure free circulation of fresh air into the under-roof space, as well as to combat excess moisture.With the help of this invention, it is possible to get rid of unpleasant manifestations in the form of dampness, mold and fungi in a short time, and on any roof structure.

In order for the future ventilation equipment to justify itself and be as productive as possible, it is necessary to think in advance about the optimal height of the roof and its shape. You also need to highlight the installation locations of devices and outputs of all channels of the system.

Compliance with simple recommendations will allow you to successfully complete the installation of such devices, and also have a positive effect on their service life. Moreover, properly equipped ventilation is a guarantee of a long and reliable roof service as a whole.

2014-5. Dormer hip roof windows. Cold attic

Ventilation of a wooden house

If we talk about the ventilation of a wooden house, then the building material itself allows fresh air to pass through quite well. Also let through its cracks in the windows and door frames with ventilation holes. In this case, the stove chimney acts as a kind of exhaust duct.

Ventilation of a wooden house

Modern wooden houses are practically airtight. This became possible thanks to the use of plastic sealed windows. There are undoubted advantages in this: the heat does not leave the room. There are also disadvantages; natural ventilation is practically absent.

In this case, you have to resort to forced ventilation. It costs a lot more. Forced ventilation consumes electricity, which requires a capital investment. When designing a room, it is always better to use natural ventilation when it comes to a wooden house.

Natural ventilation device

Natural ventilation

The exhaust duct is best placed on the roof. Moreover, the higher the upper cut, the stronger the pressure drop will be, and this will create intensive air circulation. Channel walls should be smooth and equal in cross section. This will provide high traction, and dust will not settle on the walls.

By following these simple rules, you can organize excellent ventilation in a private wooden house. The most important thing is to remember that a wooden house is an excellent structure for natural ventilation, so this is the way to be guided by when designing and installing. Do not use additional devices. This is superfluous in the case of a wooden house.