Infrared ceiling heater IcoLine from EcoLine company: device and advantages of use

In recent years, infrared heaters have been used to heat rooms, since users are convinced that such heaters consume little electricity, they do not burn oxygen in the room, and are harmless to the human body.

The most necessary and convenient is the use of ceiling heaters, which are attached to the ceiling, even installed directly into the ceiling.

Film infrared heaters are popular among users, which have many advantages. Created with the help of ceiling heating systems, the film "warm ceiling" heats any room. The principle of operation of infrared radiation is as follows: changes in waves occur on the electromagnetic field, emitting heat. The sun's rays hitting the ground heat the soil surface, trees, houses. Radiation from these objects heats the air. Film heaters also work in this way.

Any infrared film has three components:

• a heating element that converts electrical current into thermal energy;
• foil for heat distribution over the entire surface;
• double-sided laminated PET film for protection against any mechanical stress.

Infrared ceiling heater ALMAC IK-11

PLEN system

Scientists have created a system of a new generation of film heaters IK PLEN, which are installed under the outer ceiling surface. This PLEH system is based on the use of a film heater that generates infrared radiation, the thickness of which is no more than 1-1.2 mm. Heating elements made of metal (copper, silver) with aluminum foil are built into the PLEN film made of lavsan. When current flows, the foil heats up, and infrared rays begin to emit, which charge the surfaces of objects in the room with heat. The charged thermal energy is sent back, and the living space becomes cozy and comfortable.

The PLEN system can be used not only as an additional heat source, but also for the main heating of houses, apartments, offices.

There are many advantages of PLEN heaters:

• Ease of installation. The film heater can be installed by yourself.
• The PLEN system is distinguished by its low energy consumption.
• The film is fireproof, you can install it even in wooden houses, since the device heats up only up to 45 ºС.
• PLEN maintains a normal level of humidity in the room
• Allows efficient use of free space, as the film heater is installed on the ceiling
• It is environmentally friendly. The film is made from environmentally friendly materials.

Along with the positive properties of PLEN, it also has disadvantages, the system cannot be used in rooms with wallpaper on the walls, plaster and paint.

When using film heaters, dust does not rise in the room. They work silently, are fireproof, durable, and most importantly, economical. For additional heat in the premises, infrared film heaters can be mounted, in addition to the ceiling, on the walls. An infrared film heater on the wall can serve as a source of heat in the country, in the garage.

Office heaters

Ceiling heaters Ecoline Armstrong

Ecoline infrared ceiling heater designed for installation in a standard section of ARMSTRONG type suspended ceiling. Excellent consumer qualities, coupled with absolute invisibility against the background of a suspended ceiling, make the heater indispensable for use in small office premises. This is the junior model of the ELP Ecoline ceiling heater.The recommended height for use is from 1.9 to 3.5 meters. Ideal as supplementary heating for offices in combination with convective heating systems

Specifications Power [W] 500 Voltage [V] 220 Current [A] 2.3 Dimensions [mm] 600/600/15 Weight [kg] 3 Heated area on average for Central Russia main heating [sq. M] 5 additional heating [ sqm] 10 Min. suspension height [m] 2

Photo

Ecoline IR system

Ecoline infrared heaters are of great interest. They come in the form of a rectangular panel with a white or beige metal body with a silvery aluminum plate. Attach such a structure to the ceiling closer to the window. Ecoline refers to infrared heaters operating on the basis of long-wave radiation, suitable for heating all types of premises, warehouses and offices, production workshops and car dealerships.

IK EcoLine is efficient and convenient.

Ecoline benefits:

• IR Ecoline can be used for additional heating when the main one cannot warm up the room.
• An economical way to heat both small rooms and huge rooms with high ceilings.
• Fast heating of premises in the shortest possible time.
• Ecoline saves space by installing it on the ceiling.
• The aesthetic design of Ecoline ceiling heaters suits any type of interior.
• Ecoline heaters have a long service life and excellent quality. The warranty period is 6 years.
• The device can be installed independently according to the instructions
• Ecoline's fire safety is ensured by non-combustible components.

For high-tech rooms, there is a special series of glass heaters in a thin chrome frame with transparent glass.

Ceiling heaters for utility and industrial premises

Ceiling heater EL 20R

The younger model of heaters of the EL industrial series. Thermal heater EL 20R represents heaters for small industrial premises. It is equally successfully used for heating both industrial facilities and residential premises of a large area with a ceiling height of more than 3.5 m.

The warranty period is 3 years.
Specifications Power [W] 2000 Voltage [V] 220 Current [A] 9.2 Dimensions [mm] 1500/285/53 Weight [kg] 11
Heated area on average main heating [sq.m] 20 auxiliary heating [sq.m] 40 Min. suspension height [m] 3.5

Ceiling industrial heater EL 20Rm

The youngest model of the EL industrial series. Heaters of this type are equally successfully used for heating both industrial facilities and residential premises of a large area with a ceiling height of more than 3.5 m. This is a truly efficient heater.

The warranty period is 3 years. Specifications Power [W] 2660 Voltage [V] 220 Current [A] 12.2 Dimensions [mm] 1500/285/53 Weight [kg] 11 Heated area on average for Central Russia main heating [sq. M] 26 additional heating [sqm] 52 Min. suspension height [m] 3.5

Ceiling industrial heater EL 30R

"Golden mean" of infrared heating of industrial premises. The model is optimal in terms of price / quality ratio: the minimum possible power when used in high rooms allows the maximum "fragmentation" of the installed power without significant financial costs.

The warranty period is 3 years. Specifications Power [W] 3000 Voltage [V] 380 Amperage [A] 4.6 Dimensions [mm] 1500/451/53 Weight [kg] 15

Heated area on average main heating [sq.m] 30 additional heating [sq.m] 60 Min. suspension height [m] 3.5 In general, EL 30R is an economical heater for a garage.

Ceiling industrial heater EL 40R

Senior model of the industrial series.This heater is successfully used for heating large premises with a ceiling height of up to 20 m. Infrared industrial heater EL 40R is a heater for a large room, a truly powerful heater. The power of these heaters is 40 kW.

The warranty period is 3 years. Specifications Power [W] 4000 Voltage [V] 380 Current [A] 6.1 Dimensions [mm] 1500/451/53 Weight [kg] 15 Heated area on average for Central Russia main heating [sq. M] 40 additional heating [ sqm] 80 Min. suspension height [m] 3.7

Peony heaters

Infrared heaters Pion are main heating devices characterized by low power consumption and high heat output. They are made in the form of a semi-cylindrical plate, their body is small in size from an aluminum alloy, they give very soft heat.

Infrared heaters Peony Ceramic is a novelty on the market of heating devices in which a ceramic plate emits infrared rays.

Heaters Pion TERMO Glass have unique heating elements made of tempered thermal glass, the body is made of high-quality sheet steel, covered with heat-resistant paint. Infrared heaters with Pion thermostat make it possible to control the supply of heat, creating an economical mode.

IR heaters Bilux

The advent of Bilux infrared heaters made it possible to achieve excellent heat transfer when heating various premises, such as country houses, private country cottages, warehouses and production workshops. Ceiling heater Bilux differs from other systems in terms of economy, consumes a minimum amount of electricity, the use of this heater is considered an economical approach to heating houses. The infrared system can be used for heating and large areas. It will completely replace traditional heating methods using cable and water systems.

Principle of operation

Traditional heating heats the air, which immediately collects at the ceiling, while keeping the floor in the room cool.

When the equipment is installed on the ceiling, EcoLine evenly heats up not only the entire volume of the room, but also all surfaces with which the warm beam of the heater comes into contact. Thus, due to the heating speed, the energy saving is 15-40%, depending on the heat loss of the room.

Due to the special principle of operation, infrared heating is widely used both for heating domestic and industrial premises.

Calculate the cost Request a call Send a request

What is the principle of BiLux heating?

When using the IC BiLux device in the room, the surface of objects and floors heats up. This system is ideal for heating children's rooms. The device takes up little space on the ceiling.

BiLux is characterized by efficiency and safety for the human body. Infrared rays, penetrating the air, turn into heat when in contact with any surface.

Therefore, the result is like this:

• there is an even and rapid distribution of heat in the room;
• more than 80% of the heat goes to the area where the person is staying;
• energy is spent in a minimum amount;

The heating device is distinguished by its durability, stylish thoughtful design, and will last more than 20 years.

The most used system is BiLux:

• in shops, cafes to create a local heating of the workers' zone;
• for warming up in winter gardens and green corners;
• for insulation of loggias and balconies.

IC BiLux: create a favorable microclimate in the premises, heat rays do not allow the development of fungi and mold. With an electric heater BiLux, any room will be comfortable and warm.

Almac heaters reviews

See all prices

Infrared heater Almac IK5 reviews

Vasily sh. ★★★★ Advantages:

Convenient, since it does not interfere with a small area of ​​housing, hung it under the ceiling, heats up the heat from above, as if on a sunny beach and no problems with regulation. During the day I do twenty-three degrees, at night until twenty, very comfortable.
Disadvantages:
The biggest drawback is the semi-finished product. I bought it unaware of the shortcomings. Firstly, there are no wires for connection in the set, secondly, there is no thermostat, and thirdly, it cannot be connected without a specialist. And how nice it would be if you could make it like an iron, buy it, turn it on, have a rest.
Comment:
There should be different versions, with a thermostat, without, with other cockroaches. Buyers come with different requests, for me it would be better with a thermostat, I still had to look for and install it, now I already have two such heaters, I am considering buying one more.
Sergey Chek. ★★★★ Advantages:
Quiet. Mounting. Appearance. Heater color options.
Disadvantages:
Fastening.
Comment:
Used only a few times. I purchased two IK5 for a 15 m2 room in a country house (not for the whole year, but for the spring-autumn period). I did not hear any noises and crackles. I didn’t smell the smell when I turned it on for the first time either. Such a good idea with a mount, when the installation can be done literally "by eye" and so "clumsy" done. Studs that cling to the hook do not fit into the groove. You have to either unscrew the sidewall of the heater, or bend off the edges of the "track" along which these pins move. As the saying goes, "finish it with a file." It seems like such a trifle - make a groove in front of the "path" deeper, but no ... But the feeling of buying is already spoiling. Otherwise, everything is fine.

Buy at a bargain price

Infrared heater Almac IK11 reviews

Stepan S. ★★★★★ Advantages:

- Very easy installation, if you missed and screwed the hooks in the wrong place, you can move the ears for suspension and everything is in order. The terminal blocks are automatic, pressed the buttons, inserted the wire and the connection is ready. - Heats up quickly, takes 20-30 minutes and the room is heated. - Beautiful case, made of aluminum, hard, not tin can. - 5 years warranty!
Disadvantages:
- No wall brackets.
Comment:
I bought it in September 2011 from an official representative. it was very cold in the apartment, and there was still more than a half moon left before the heating season. Friends advised, said that it is a very economical thing and oxygen does not burn. I hung it up in an hour (I don't know how anyone, but I have the skills of electrical work), laid the wires in the cable channel. Together with the heater I bought a thermostat, on it you can set the temperature you need. It warms up perfectly. I hung it over the bed, I liked the fact that the bed itself heats up (the linens are warm). I leave for work the thermostat I twist by 10 degrees, when I come home from work I twist it by 24. The thing is excellent, I really liked it. Now I'm thinking of hanging the same ones on the loggia and in the bathhouse (dressing room) in the village.
vadim z. ★★★★★ Advantages:
Price, quality
Disadvantages:
No.
Comment:
I bought it via the Internet in Samara. The price is the best in Russia. Free delivery. Good quality. I took it to heat the greenhouse. Until the greenhouse was assembled, I hung up the houses as additional heating. It warms up very well. does not burst (like others) Appearance-5, Quality-5. Very satisfied!

Buy at a bargain price

Infrared heater Almac IK7A reviews

Slava P. ★★★★★ Advantages:

Lightweight, compact, instantly warms up and easy to install.
Disadvantages:
Does not come with a wire, although this is not a problem.
Comment:
I bought in, I needed a device for heating an uninsulated garage for the duration of my stay. I wanted to take household IR heaters, but I was convinced that in my conditions there would be almost no sense from them. They showed this model, turned it on, explained the operational nuances. Everything is clear and competent. Guys, you are great! I will recommend you and your product to my friends!
Alexey Dizhechka ★★★★★ Advantages:
A very compact heater, when we arrived and we were opening it up, at first we could not believe that such a baby could heat it like that. I have 2 of them on an area of ​​45 sq. M. , the height of the ceilings with a slope of 4.5m to 3 meters, it heats up smartly, and most importantly, no need to wait, turned it on and immediately warm. The second joyful moment, I have them mounted in the service, absolutely safe for cars and paintwork, I don't know why and how this happens, but they do not heat the surface of the car. It is very cool. When acquaintances saw them before the installation, they were skeptical, ala, they would not warm up, that all this was nonsense, but when they looked in action, they gasped. In general, what can I say, technology. By the way, here the price is also pleasing, because here in Kaliningrad they ask for as much as 9900 apiece for such kids. But in the store, when one of them was turned on, he immediately sunk into my soul and now I have 2 of them working in the workshop. Special thanks to the managers for both free shipping and friendly communication.

Buy at a bargain price

Infrared heater Almac IK8 reviews

Alexey M. ★★★★★ Advantages:

Intending to use it in a hut, in the tree of Krivtsovo, Myshkinsky district. I live in St. Petersburg, and in the summer in Yaroslavskaya. I have a dacha in near St. Petersburg, 50 km. In 2020, it almost burned out due to unstyled coal. As a result, he eliminated the furnace and the pipe. I installed two ALMAG panels in my hut: 500 watts in the kitchen and 800 watts in the room. Now I lived without worries (August-September). I set 21 degrees on the device and scored everything day and night. Electricity consumption is acceptable. I will go to the dacha in the first 20 days to the dacha and to Trinity and later to Yaroslavskaya.
Disadvantages:
Keep in mind that you need to hang the plates at a distance of about a meter from a permanent seat or bed - these are the rays of the sun, as it were.
Sergey Shch. ★★★★★ Advantages:
Heats the room well, consumes little electricity, acceptable (excellent price) in relation to foreign counterparts, long warranty period of 5 years + production in Russia and not in China
Disadvantages:
They just do not exist, I did not see
Comment:
I bought it last fall for additional heating, this is my repeat purchase. I put these heaters 3 pcs on the ceiling of a wooden country house measuring 5 by 5 meters, the brackets are included. Powered all three through one thermostat offered on the site. I installed it myself, no problems, they work without any crackles. There is no gas and is not expected in the near future, the IR are used as an additional source of heat in conjunction with the furnace. They cope with their task perfectly, crackling is not audible when cooling. The efficiency and speed of warming up the room for these IKs is higher than for electric boilers, the main thing is to correctly calculate the required amount of IKs for a particular room and install them evenly. Do not forget that electricity is the most expensive type of fuel, and I did not see high costs with IR heaters + Thermoregulator. In the near future I plan to purchase a kit for installation on the second floor and in the bathhouse. I recommend purchasing from an Official Seller)))

Buy at a bargain price

Infrared heater Almac IK13 reviews

Nikolay V. ★★★★★ Advantages:

It works silently. I chose a pleasant color for the race.
Disadvantages:
Not found.
Comment:
Using less than a month, but before that I put Almak 500W in a small room and was very pleased. This is twice as long, but the area is already quite large. Now I have underfloor heating as promised! Recommend.

Popular questions about Heaters

IR panels for heating

Among heating devices, infrared panels occupy a special place, which are 2 times more efficient than electric boilers, oil radiators. The heating elements of the panel radiate energy, which is almost completely expended to create warmth and a feeling of comfort.

• Heating panels ENSA are made using environmentally friendly materials.
• The panel body is made of high quality durable steel that can withstand high temperatures.
• The super-thin heating element of the panel helps to reduce power consumption, while increasing heat transfer.
• A heating element is installed in the ENSA IR panel, completely enclosed by a non-combustible, heat-resistant dielectric.

The panels have side walls of the heaters, with the help of which the heating result is increased, since the direction of the convective air flow is created.

The heating season must be approached thoroughly, for this there are many types of infrared heaters on the heating equipment market: film, panel, and other economical devices that not only heat, but also have a therapeutic effect on the human body.