Choosing a reliable three-way valve for a warm floor types and features of the connection rules

The main element of shut-off valves, without which it is difficult to imagine the installation of a water system for heating air masses from the bottom of the premises, is a three-way valve. The device provides mixing or switching of two streams of water into a common stream. A three-way underfloor heating valve is used to get the heating medium in the system at a predetermined constant temperature. Where the auxiliary heating is connected to the heating network (a boiler in a private house), the device is part of an autonomous mixing unit, which guarantees that a coolant with a temperature of 45 to 550C circulates in the warm floor.

The purpose of the valve for underfloor heating and its types

The design of the auxiliary heating system can include the installation of a two-way or three-way valve on underfloor heating in a mixing unit. Both types of devices provide continuous thermoregulation of the liquid heat carrier. The water floor can be connected to both centralized and autonomous heating. In both types of systems, the temperature of the coolant is 650C-850C. If such hot water gets into the contours of the warm floor, it is impossible to create an atmosphere on the surface of the floor covering that is comfortable for walking barefoot and being in the room.

The floor screed perfectly accumulates heat, so the temperature on the floor surface will be over 450C. Which is unsafe for the flooring itself. The permissible surface temperature should range from 180C to 330C. To ensure such conditions, it is necessary to cool the heated liquid before it is introduced into the system circuits. This procedure is carried out by a mixing valve for underfloor heating, which can be bought in specialized stores.

If one cannot do without them in auxiliary heating systems, then which one to choose - two- or three-way? It is very simple to decide:

• The supply, or two-way valve for a warm floor is a simpler, and therefore more resistant to loads, device. Installing it will not overload the system. The device takes care that sudden and unstable surges of the flow are excluded. It is used in systems for heating air masses from the bottom of small-scale rooms (maintenance of an area of ​​no more than 190 m2). In this case, a high-temperature heating system must provide heating of a liquid heat carrier exclusively for the circuits of a warm water system. In fact, a two-way thermostatic valve for underfloor heating performs an increase in the temperature of the coolant by adding hot liquid coming from the boiler to the cooled one coming from the return line.

  

• Structurally, a more complex three-way tap for underfloor heating is a device that performs the function of mixing hot and cooled streams, and then dispensing. It is used in heating systems for objects with an area of ​​more than 200 m2 and when connecting a water-heated floor to a centralized or autonomous heating network. Its principle of operation is described above.

Since a three-way mixing valve for a warm floor (it is called a thermostatic, thermo-mixing valve) is a more versatile device, it is used in 8 out of 10 cases. However, if the device is installed incorrectly in the system, emergencies may arise.

Variety of regulators for water floor construction

The fundamental difference between different control devices lies in the way of setting the required temperature:

1. Mechanical modifications. These devices rarely break down and are affordable.This type of water underfloor heating regulator has a simple scale that makes the adjustment process easy and understandable. The required temperature is set using a rotating disc. Sometimes there is a lever on the front panel of thermostats for a water floor with heating, designed to turn it on / off. Such devices have no other functions. The average price for them is 15 euros.
2. Electronic devices. Their functionality is similar to the mechanical version, but it is implemented differently. The electronic model provides for the presence of a digital screen on which the current or set parameters are displayed. Also on devices you can see several buttons. On them there may be arrows with signs "up" and "down", which serve to gradually change the temperature regime. Estimated cost - 20 euros.
3. Models with programming. Adjusting the temperature of the underfloor heating using such a device allows you to both maintain stable heating and change it automatically depending on time. Models are on sale that have the ability to program the temperature regime during the day and on the days of the week. This function allows you to save energy resources, which means money and at the same time live in comfortable conditions. For example, the temperature can be lowered when all family members are away from home, and raised before they return. Some modifications, in addition to the stationary unit located on the wall, are equipped with portable control panels. Now on sale there are models that adjust the work using a computer or tablet. The simplest modification, which provides for the ability to set the floor temperature in time, will cost no less than 40 euros, and a heaped device can cost more than one thousand.
4. Multizone modifications. These thermostats control several circuits and maintain individual parameters in each of them.
5. Sensory models. The list of functions performed by these devices is the same as for electronic models. But they are equipped with touch buttons, not tactile ones. The cost is higher.
6. Radio thermostats and controllers. Such systems, supplied by European manufacturers, are new to the domestic market. For example, Uponor systems consist of radio-controlled servo mechanisms, a radio thermostat that monitors the readings of sensors and a radio controller that receives data from the thermostat and passes it on to the servos. The kit also includes an SMS-module that allows you to control the system via mobile communication and monitor its status.

Additional components of the mixing unit

It is not only the three-way thermostatic mixing valve for underfloor heating that ensures the efficient operation of the system in every single room. The node includes:

• Thermal head. Ensures the continuity and automatic operation of the auxiliary heating system for air masses. If the purchased two- or three-way valve is already equipped with a thermostatic element, then it is not necessary to install it additionally.
• Servo. They produce electrical and mechanical devices, as well as equipment with a remote control method. The device is designed to physically influence the thermo-mixing valve for underfloor heating, giving a command to open and close the damper. Thanks to him, it is possible to supply a coolant with different temperature characteristics to different rooms of the house.

Equipment characteristics

The coolant from the boiler passes through the pipe line to the collector. From it, the liquid enters the floor pipeline. Giving off heat, it returns back to the collector, which has a separate return outlet for the cooled heat carrier. The circulation pump pumps water back into the boiler.

With manual control of the temperature regime, valves are installed on the circuit with cold water and a high temperature coolant. If the room has warmed up well enough, then the hot water valve is closed. If the room is cold, then the valve is opened.

For automatic regulation of the heating mode, a three-way mixer with a thermostat and an external temperature sensor is installed. This system forms a thermostatic valve. It is installed at the inlet to the manifold. The equipment is made of brass or bronze.

• The three-way valve has 3 outlets for hot and cold water and for the heating medium, which is supplied to the floor line. On the case, markers indicate the direction of flows of different temperatures.
• A mixing chamber is provided for mixing liquids of different temperatures.
• A thermostat with a temperature controller is located on the body.
• The temperature sensor is located on the thermostat.
• The valves close off the cold and hot flow outlets. They can be disc-shaped or needle-shaped. Their work depends on the thermostat.
• The thermostat is a system that consists of a liquid capsule and a spring-loaded stem. Valves are attached to it.
• The temperature sensor has a digital panel on which the heating modes are indicated.

We recommend: How to turn on the warm floor?

The thermostat can be located in the thermal head or in the actuator. The devices have a different circuit, but the same principle of operation. The thermal head is a thermostat, which works with the help of a liquid: it is sensitive to temperature changes.

The servos are powered by the electrical network. The liquid is contained in a container. It contains a heating plate. The servo is installed on the manifold.

The three-way mixer is designed for heating systems of large areas. In separate rooms or in country houses, a two-way valve is connected to the collector. It is installed on a circuit with a high temperature coolant. Water flows through it in only one direction.

How to choose a valve for a warm floor?

The popularity of water floors, which are increasingly used to heat private houses and country cottages, has given impetus to the emergence of a huge selection of models on the market. But then the question arises, which three-way tap to install on the warm floor, which manufacturer to prefer. After all, the abundance of goods complicates the purchase. When selecting a device, experts recommend determining in advance what type of device is needed - two- or three-way. Then choose a manufacturer:

• Valtec. The company presents Russian-Italian products on the market. Their main advantage is a budget price with excellent physical and technical qualities. The manufacturer gives a 7-year warranty on the purchased three-way tap for underfloor heating with a thermostat. Products are supplied with quality certificates, a technical passport, a recommendation sheet for installation and a warranty card.

  

• Esbe. The Swedish company offers high quality floor heating taps made of innovative materials. The devices are maximally resistant to operating conditions, reliable and visually attractive. When buying Swedish devices, it is recommended to carefully consider the technical characteristics of the equipment. There is a small chance of parameter mismatch. The cranes are supplied with certificates and warranty cards, the operational period is over 5 years.

  

  Read also:  Smart House. Heating control system SALUS iT600

• Honeywell. The thermostatic mixing valve for underfloor heating of the American company Honeywell is distinguished by its high manufacturability and excellent design. The main advantages of its products are practicality and simplified installation. The design is designed in such a way as to facilitate the installation of equipment as much as possible.Errors are excluded. The company is proud of its innovative developments, which it implements in the manufacture of devices. This makes them more efficient and reliable, but also more costly.

  

From the listed manufacturers, consumers buy three-way valves for underfloor heating that have already been tested by time. But do not rely only on the quality of the equipment, because even the most stable and reliable device will not be able to protect the system if it is installed incorrectly. In this case, the choice should also be based on the throughput of the unit. This parameter should be clarified in the technical documentation for the equipment. When designing a system for auxiliary heating of air masses from the bottom of the room, its power, throughput, heat loss, etc. must be calculated.

Classification of thermostatic valves

There are quite a few types and types of thermal valves, but they all have a common structure:

• body - coupling or tee,
• valve - a regulating or locking mechanism,
• valve with thermostat - control mechanism.

Thermostatic fittings are classified according to several parameters:

• body structure,
• the location of the control valve,
• appointment,
• the way to regulate the flow,
• way of control.

According to the housing design, the following types of thermostatic valves are distinguished:

• straight,
• angular,
• three-way.

The body of the straight and angle thermal valve is, respectively, a straight and angle coupling, the body of the three-way valve is a tee.

The location of the control valve can be:

• axial - the valve is located opposite one of the nozzles on its continuation, the valve is called axial;
• side - the valve is located perpendicular to the body, on the side, the valve with the side valve does not have an additional name and is called only by the shape of the body.

We recommend that you familiarize yourself with: How to choose and install a ball coupling valve

Thermal valves are distinguished by purpose:

• radiator - for connecting heat exchangers,
• mixing or mixing - for adjusting the pressure and temperature of water in taps and underfloor heating systems,
• switching - to change the direction of flow of the working medium in the heating and water supply circuits,
• dividing - to distribute the working medium into two streams.

Flow control methods define the following balancing valve classification:

• adjustable or open control valves - the pressure and temperature can be adjusted at any time, the valve is controlled without special keys;
• closed or presetting valves - the parameters of the working environment are set during the installation of the system; a specialist and a set of special tools are required to reconfigure them.

Depending on the control method, thermal valves are distinguished:

• manual - adjustment is made by rotating the valve,
• automatic - equipped with a thermal head that responds to changes in temperature and pressure of the coolant,
• remote control - equipped with a remote thermoelement that responds to changes in room temperature, with the ability to adjust the optimal range.

Installing a thermo mixer for underfloor heating

Correct installation of a three-way valve on a warm floor consists not only in connecting the equipment to the pipeline, but also in carefully checking it. Mistakes can lead to big trouble. Installation of the device is carried out when connecting the collector and before pouring the concrete underfloor heating. At this stage, complete assembly of the system is performed and its check is carried out at a temperature of the carrier not higher than 22-250C. The build quality testing period must be at least 24 hours long. After making sure that the system is working correctly and that there are no leaks, you can complete the installation.

To connect a three-way valve for heating with a thermostat for underfloor heating, use conventional wrenches.With their help, the internal / external thread of the device is screwed onto the fitting or pipe union nut. The tightness of the connection will be ensured by sanitary flax, FUM tape or other materials. Special silicone gaskets are supplied with the tap. When working, you need to make sure that they were laid in the nest, otherwise a tight connection cannot be achieved.

During installation, avoid:

• excessive impact on the threaded connection;
• distortions of pipes, especially at the joints;
• loose or loose screwing.

  

The installation of the crane is a crucial moment, since its operation and the threaded connections obtained during installation will be exposed to moisture and high (fluctuations) temperatures. Therefore, all work must be carried out carefully and accurately. The process of assembling the mixing unit is completed by adjusting the three-way valve for underfloor heating using a head. If you are not confident in your own abilities, it is better to leave the installation and purchase of the necessary equipment for assembling the system to professionals. Remember: a warm water floor can cause not only damage to the flooring, but also the inability to create optimal comfortable living conditions in the rooms. For all questions of underfloor heating, please contact our specialists.

Purpose of the device

It happens that in the premises, in addition to radiators, there are other sources of heat - household appliances, gas or electric stoves, and so on. On sunny days, the temperature rises and the house becomes warmer than usual.

Important! The task of the thermostatic valve installed on the radiator is to automatically control the temperature, during which it takes into account temperature fluctuations in the room at a height of up to 2 meters.

Thermostatic valve for radiators ensures the reliability of heating equipment. By including it in the heating system, a comfortable and optimal temperature in the room is achieved and, at the same time, money spent on energy consumption is saved. The valve stabilizes the operation of the heating system if pressure drops or disappears in it.