How to paint a heated towel rail and pipes

Andrey Grigoriev

We built a wooden fence, metal pillars, tell me whether it is necessary to close the top of the pipe near the pillars and what is the best way to do this? Plastic plugs specially designed for this purpose. https://www.zaglushka.ru/ Water will fill up in autumn and break pipes in winter. You can weld the caps You can stick the bottles in Make it easier, at the bottom of each pillar, drill holes for the water to drain from the pipe. On the good, the pillars should be painted, although if the metal on the pipes is normal, then it will stand for twenty years without painting, it will not go anywhere, here is the question ...

Artem Spekhin

I want to paint one piece of iron. Sand and degrease, prime and paint. the best to chrome the piece of iron goes through several baths with acid.You can cover it with yellow, white and black chrome the most reliable will be.

Victor Lebedev

What happens if you paint a slightly rusty metal tube with enamel? Will the paint adhere? Or peel off? Well, clean off the rust, what's in the scrap? the more "slightly rusty" First, there are special paints for rusted metals. But all the same, you must first degrease the pipe with vodka (or an alcohol-containing liquid), and then paint. If you roll in a thin layer, then hold out for 1 year! If it is with ordinary paint, it will peel off. There are rusty paints.

Yuri Antsyferov

That year, the craftsmen painted the heating pipes with good paint, and during this heating season it turned yellow. Even the best paint fade and turns yellow from the temperature. It is better to do hidden installation of pipes in the wall. I covered the pipes with a primer gf-021 (gray) and I doubt whether I need to paint the color of the walls. And so good. Be glad that it did not fall off but turned yellow, perhaps because the pipes are rusty and will soon be replaced

Alexey Sukin

What exactly do you hate in the interior of the apartment, which is considered by many to be "classics of the genre"? You can list and enumerate Sideboards, patterned carpets, antediluvian curtains, stools, dressers, dressing tables, and so on. In general, I love minimalism and cleanliness in the interior. And minimalism in the interior is just not minimalism in ... Curtains, wallpaper in a flower with sequins, laminate, linoleum imitating parquet, white plastic windows, bar counters in the kitchen

Vitaly Negushin

Every day, morning and evening, I kiss my "Mercy" on the nose. Gray do you wear lipstick? Not a boutique, but a paint store, look in the city's shops Buy Nickel-plated paint, remove the badge, wipe the badge with sandpaper, prime and paint It is necessary to go kissing in the backside not so noticeable Seryonya, do not frighten, otherwise the boys will run away right now. It is necessary to rip off a mercik every evening in the exhaust! Haaaaaaa!

Timofey Barmin

How to paint the grilles on the windows if they are already covered with rust? First, paint with a rust converter — it is sold in household stores (this is orthophosphoric acid) —it binds the rust. Then primer and crust with ordinary paint. or Alifa passed on top with paint Buy a rust converter. process, and then cover with automotive enamel (for metal Remove rust with sandpaper, rinse with kerosene, paint with a primer, paint with enamel

Vladimir Sumarokov

How to paint the pipes in the bathroom and in the toilet so that they do not rust and then the paint does not hang on the burdocks? First you need to remove the old one, then prepare the pipes (if rusty or dirty), degrease with some kind of solvent, wipe off dust at least Enamel paint is needed (color is apparently white), alkyd, it happens for heating pipes ... Clean as much of old paint and rust as possible and Hameright. Only made in England.

Lyubov Bedanova

How to improve the appearance of an old country refrigerator Paint with gouache We pasted over with self-adhesive film.

If you are going to paint all the same, and not apply photographic printing, then I will add: there is a primer for car paint! And the putty must first be cleaned off the rust (there will already be an unevenness under it) or dry it slightly with an anti-rust remover ... If it is cheaper then buy acrylic paints and paint like your heart desires or yourself (from the bulldozer PARDON! or according to the stencil

Konstantin Donkov

What paint to paint a large metal container? To protect against corrosion! My brother painted the metal barrel with B-EP-433 enamel. The paint has been holding for quite a long time! I know that I ordered enamel on this site https://9715151.ru/Katalog/emali/emal-b-ep-433 Outside, the simplest thing is to enamel on rust. And if we are talking about the inner surface, then, for example, VL-023 soil (1 layer), then VL-515 enamel, at least 2 layers.

Yulia Krotova

How to make an extremely economical bathroom renovation? Can the walls and floor not be tiled? And what then? Tile on the floor, 1 meter below with plastic panels (horizontally) on top - with decorative plaster (or paint) the joint between the panels and the wall, close the tile corner. Paint the ceiling and glue the foam border. It looks very nice ... You can make an exopan, cheaper and not a little worse

Anna Morkovkina

How and what to paint rusty pipes in the bathroom? Now there is paint on rust. In the store, ask and they will tell you everything. Change them to new metal-plastic ones. You don’t know how thick their walls are. They may burst. First, they must be cleaned of rust and old paint. It is better to paint with oil paint. It is moisture resistant.

Vadim Okunev

What must you do when you move into a new apartment? Instructions for a newcomer? Somewhere in the depths of human consciousness, the belief has firmly settled that cats are somehow connected with evil spirits, and "a raven will not peck out a crow's eyes," and, therefore, the cat itself is not in danger. In addition, the owners relied on the wise ... Soak the apartment so that in the morning there was something to remember. First of all, before letting a cat or cat into a new apartment, you should inspect your future home. You need to start examining a new apartment from surfaces: floors, walls and ceilings. Of course, you shouldn't expect them to be perfect ...

Alexander Gubanin

Is there a heat-resistant paint for rust? Uh-huh bitumen There is a heat-resistant one, but I never met it for rust. Have you decided to paint Glushak? I look at the pipes myself and take longing. Hammerayt burnt, heat-resistant rusts I painted a wood-fired titanium pipe, well, very rusty, with heat-resistant paint and adhered very well (gradual heating is recommended after painting) And it's not destiny to clean the rust?

Yaroslav Apraksin

Plumbing. You know, I advise you from personal experience, it's easier to hire a plumber, to do everything humanly, from modern materials and forget for LONG years, than to make "snot" again With a little blood to get rid of the stench, cement the hole around the hose .... 1-pull out the hose and clean the cast-iron pipe from everything, go to the store (market) of sanitary goods and buy a transitional rubber coupling from 70 to 40mm (as I understand it for your HOSE) -all 2 - water goes through the mixer into the pipe (cold) that you need a pipe ...

Anastasia Mudyugina

Corrosion of stainless steel. What is the name of this type of corrosion? Oxidation The first time I see such crap on stainless steel, I still understand rusty streaks, but such Poor quality metal. Summary: clean the metal, heat it up, cover it hot with a primer. There is corrosion or it is not present! Don't care if it's stainless steel or not. Corrosion of metal is an oxidation process, stainless steel resists more than ferrous metal, but the essence does not change from this Your fence looks like galvanized, or anodized ....

Natalia Kukina

What color scheme is your bathroom? Do you buy towels to match?

Pipe painting: tips from professionals to self-taught

and the plumbing is white or also in tone? We have a shared bathroom. The tiles are blue on the floor, the walls are up to half blue, the walls are white higher, the ceiling is slatted with built-in lamps, the shower curtain is also blue with fish. Plumbing is white, towels of all colors of the rainbow For many, nothing has changed since the construction in the USSR. gamut one - walls painted with half blue paint, and the rest whitewashed, rusty risers

Victor Lyzhin

How to paint a rusty pipe? how to process, in what sequence and with what paint. Thanks. Buy a rust and paint converter according to the instructions. and then upstairs with any paint or there is a special paint for painting rusty surfaces! There are no problems with this right now there is paint 3in 1 for rust In a blunt emery teranul, Peel off the husk, and forward Well, I don't know, we can have a better way

Gennady Sukhoi

Can radiators be painted with car paint? Who painted, share your experience: how does it behave when heated? Heating radiators can even be painted with water-based paint, and even more so with automobile paint. Yes, I heard. that they paint and the result is good. I did not paint, and the paint is not intended for high temperatures: 80 degrees, maybe it can withstand. You know, it may crack at high temperatures. By the way, if you have old paint on pipes, then maybe the paint will swell….

Zhanna Iglina

How to paint a rusty pipe? How to process it in what sequence and what is the best paint? Metal brush (or drill attachment), rust converter, degreaser, primer, paint. Paint on metal, best of all with paint for AUTO from a bologna, if the area is not large, I painted the heating pipes for her, they are as good as new for 5 years. Remove the layered grout with a metal brush, degrease and paint with either "Hameright" or "Spetsnaz"

Reasons for the formation of condensation Prerequisites for the appearance of condensation on cold water pipes How to remove condensate, how to wrap pipes Chemical elements that help to get rid of condensation Device for draining condensate - condensate drain

Condensation can almost always be observed on cold water pipes. This phenomenon not only spoils the appearance of the bathroom to some extent, but can cause serious problems. Constantly wet tubing has a limited life.

Therefore, such a problem should be solved very quickly. In this case, questions arise, what to do if water drops are found on the pipeline and how to remove condensate from cold water pipes. First, you don't need to over-dramatize the situation. Secondly, you need to familiarize yourself with all methods of eliminating this problem. Thirdly, choose the most optimal option and apply it in practice.

How to work with a chrome heated towel rail?

If a modern heated towel rail does not fit into the bathroom interior, its appearance can also be changed. Not every paintwork material is suitable for chrome: most either slide off or are quickly erased from the surface of the product. You will have to do sanding or sandblasting, removing the chrome plating to bare metal. After that, you can prime and paint the coil in the usual way.

If there is no desire to carry out such serious preparation, you can buy high-quality paint of the Tessarol, Hammerite brands and apply it directly to the chrome, however, the price of the work will be quite high. Before painting, no sanding or priming is required - you can simply degrease the product with any solvent.

Painting a heated towel rail is not too difficult and tedious task, it can be done independently. A new product will last a long time when choosing a high-quality paint, so there is no need to save on material.

Reasons for the formation of condensation

Condensation on cold water pipes may appear for the following reasons:

The presence of a source of high humidity in the room.
Insufficient ventilation.
Water supply pipes are of poor quality insulation.
Temperature changes. For this reason, in the summertime, there may be a stronger formation of condensation, which simply flows down the surface of the pipes.

Most of the reasons for the formation of condensation are self-explanatory. As for the first item from the list, some clarifications are required.

Sources of high humidity include the following:

Problems arising in the process of functioning of communication systems and buildings. This can include steam generation during cooking, evaporation from wet laundry, a flooded basement, a pipeline accident, and debris clogged ventilation.
Building defects resulting from a violation of construction technology.
The geographical features of the region: the close location of large bodies of water or high humidity levels in combination with rocky soil, which contributes to the formation of condensation.
Unfavorable natural phenomena: wet snow, prolonged rains or humid local climate.

Water droplets can appear on pipes, both for each of the reasons separately, and with the combined effect of all of the listed conditions.

If in the first case, the problem is not of great importance, then the second situation requires an immediate search for a solution to the problem, how to protect pipes from condensation (read: "How to eliminate condensate on cold water pipes - causes of occurrence, ways to solve the problem").

How?

Drying the cold water pipe

Pipe painting in the case of cold water begins with drying. The fact is that the pipes of cold water supply for most of the year are noticeably colder than the air in the apartment. Consequence - the fallout of condensation on them.

Drying the cold water line is quite simple:

Get a supply of water that will be enough for you for a day;
Do not use cold tap water during this time. During this time, the pipe, together with the water in it, will acquire the room temperature, and all the moisture from it will evaporate.

If you need to paint the cold water riser, you will have to use a fan. Under a sufficiently strong air flow, water evaporates faster than it condenses. In any case, with a temperature difference between the pipe and air of 10-15 degrees, as it usually happens.

Condensation inevitably falls on the cold pipe

Painting

Finally, let's get to the main point.

How to paint pipes?

Prepare the surface... Old paint and rust must be removed from it. Layers of paint are perfectly removed with an ordinary sharp knife; you can gently warm up the paint with a building hair dryer or a gas burner (spray can with a nozzle).

Attention: do not overheat the threaded connections. If the rewinder burns out, the thread will flow.

Scrub the pipe surface with a wire brush... This final surface preparation step will remove rust and paint residues from the water pipe and prepare the surface for priming.

When preparing the pipe surface for priming, a metal brush is required

Prime the pipe... An anti-corrosion primer will help protect the pipe from rust; paint will hold up much better.
After the primer has completely dried, the pipe is painted, as a rule, twice... Better to use thin layers of liquid paint. Dilute thickened paint if necessary. If it is thick, it will dry much more, and the untidy drips of the pipes for the water supply will not decorate.

A special case

It is often asked whether hot pipes can be painted. The answer is yes.

But, as usual, there are subtleties.

Whatever paint you apply with a brush, on a hot surface it will dry much faster than you rub it... The consequence is an uneven paint layer and visible brush marks. The solution is simple: buy spray paint. Or use a spray gun.

Please note: attempts to protect the wall with a newspaper will most likely lead to drips on the wall, and at the same time on the floor. Take the time to secure with tape a large enough piece of plastic wrap so that one piece covers both the wall and the floor under it.

The paint dries on a hot pipe or battery will smell... No not like this. SMELL. Take care of the ventilation, or in half an hour you will lively chat with aliens or gnomes in green caps.

Excuse me ... ah ... could you ventilate the room?

The first paint that comes across, especially white, on a hot pipe will quickly change color... The correct paint for hot pipes is heat-resistant enamel, on which the manufacturer explicitly indicated an upper operating temperature range of at least 100 C.

For hot pipes and batteries - heat-resistant enamel

Prerequisites for the appearance of condensation on cold water pipes

In most cases, condensation appears on the pipes located in the bathrooms. Despite the specificity of these premises, it is not only for this reason that the pipes become wet.

There are a number of factors that can cause condensation to form on toilet pipes:

Insufficient ventilation. To determine that condensation appears precisely because of this, it is enough to leave the toilet doors open at night. If the pipeline turns out to be dry in the morning, then you should repair the ventilation system and make it better.
Constant flow of water in the tank due to valve malfunction. This leads to the fact that the pipeline begins to cool down, as a result of which a greater accumulation of condensate is noted on its surface. A simple repair of the inlet valve and tank taps will help fix the problem.
Leaking in the toilet of the neighbors living on the top floor. In this case, you need to inform the owners about the situation that has arisen. If they are absent, you can temporarily eliminate the condensation with your own hands. For this, the section of the pipeline, on which the accumulation of water droplets is found, is wrapped with a bandage in several layers and one end of the winding is lowered into the container, the accumulated water is regularly poured out.

What is required for painting?

In order for the process of painting such a device to proceed quickly and without additional hassle, it is necessary to purchase and prepare the following in advance:

Heated towel rail diagram.

sandpaper;
primer;
natural bristle brush;
screwdriver;
gloves;
a clean cotton rag;
detergent;
putty knife.

In addition, paint and varnish material is required. Here you need to use a special one, since you should not forget that a heated towel rail is a device that heats up to high temperatures. Therefore, ordinary paint will not work for its decoration. Here it is better to take a silky-glossy alkyd enamel designed to cover heating radiators. It perfectly withstands temperatures up to 180 ° C. This means that the finished finish will delight the eye for many years. If you take regular enamel, it will crack soon. As a result, re-painting will be required, but with the use of a different finishing material.

Related article: Technology of monolithic-frame construction of houses: pros and cons

As for what color to choose the paint, then everything here will already depend on your preferences and the interior that is present in the bathroom. So, if you want to add a touch of chic to the existing design, then you can finish the heated towel rail "bronze" or "gold". She looks luxurious and attracts attention.

Materials Required: Brush, screwdriver, primer, gloves, putty knife and sandpaper.

Having made such a painting, you will transform the interior of the bathroom, the heated towel rail will become its key detail.Therefore, be sure to pay attention to the finish "gold" or "bronze". She will definitely not disappoint you.

You can also buy paint in other colors, such as beige, pinkish, bluish, greenish or otherwise. At the same time, it is strongly not recommended to choose white enamel. Although at first it looks beautiful, then it loses its high aesthetic properties. As a result, the heated towel rail acquires a yellowish tint, which greatly spoils its appearance. It will not be possible to remove it in some way, for example, using cleaning agents. Therefore, this option for painting a heated towel rail is not the best.

How to remove condensate, how can you wrap pipes

Those who are faced with such a phenomenon immediately have the question of how to wind the pipe so that there is no condensation. There are several ways to prevent the appearance of water droplets on the surface of cold water pipes, one of which is thermal insulation. This option is considered the most effective, since it eliminates the cause of their appearance - the temperature drop. The easiest and fastest way to solve the problem is by means of an insulating tube, cutting it lengthwise for convenient placement. Foamed polyethylene, energoflex or thermoflex are used for the manufacture of the tube.

There is another way to deal with condensation on pipe elements, but it is considered more complicated. Using this option requires the following materials: epoxy putty, acetone, rust remover, sanding paper, spatula, nylon thread and strips of fabric about 5 cm wide.

Chemicals that help get rid of condensation

Chemical industry products such as Stermizol, Korund, Teplomett and others help protect cold water supply pipes from condensation.

The use of these insulating mixtures implies the following actions:

The pipe is cleaned of dirt and rust.
A layer of primer is applied for better adhesion of the insulation to the surface and left to dry.
Using a roller, brush or spray gun, cover the surface with a protective mixture. The most effective is the application of 5 layers of insulation, and each layer must dry well before the next application. The optimum drying time for such mixtures is about 1 hour.
A special fixer helps to extend the service life of the heat-insulated pipeline, which in parallel will make the pipes more attractive.

Which way to use to combat condensation on cold water pipes depends on the reasons for the formation of this phenomenon and the specific operating conditions. It is very important to consider how often the problem occurs, as well as at what stage it is.

Painting metal pipes

In order to decorate pipes in a black metal bathroom, the whole process will take place in the following sequence:

Why are the pipes in the bathroom making noise? Causes and remedies

cleaning metal from old paint, rust and other unusual excesses;
then cover the metal surface with a primer in order to create a reliable base for the paint and varnish substance;
application of one or more layers of paint, depending on the type of substance used.

High-quality pipe decor in the bathroom largely depends on the choice of paints and varnishes. For priming metal products, it is best to use a mixture of the domestic manufacturer GF-021. Of paints, it is better to use substances on an alkyd, oil or pentaphthalic base. Below we attach several photos of the decoration options.

Options for decorating metal pipes

Before painting pipes in the bathroom, it is important to remember that only paints and primers based on solvents such as "acetone 640" and similar analogs are used for metal products.For plastic pipes, such paints cannot be used, since they violate the molecular integrity of the plastic.

Modern manufacturers also offer special paints and varnishes that simultaneously serve as a primer and paint, but such products have a limited color palette. Below we offer several photo options for how to beat a riser in a bathroom made of metal pipes.

Condensate drain - condensate drain

A float steam trap is used to automatically drain the formed condensate. This device is installed at the outlet of an apparatus that provides heat exchange, including water heaters and air heaters. By means of such a technical device, the water accumulated in the system is simply evaporated.

Steam traps are divided into three main groups:

Combined type devices.
thermostatic.
Float.

Float type steam traps operate by exploiting the density difference between condensate and steam. These devices are very popular due to the large number of positive characteristics.

The main advantages of this type of device are the following:

High degree of reliability.
Excellent performance indicators.
Ability to work at minimum loads.
No need for condensate cooling.
Resistant to sudden temperature changes.
Uninterrupted operation at increased loads.

Also, one cannot fail to note the optimal indicators of energy saving of thermal systems with float-type steam traps.

To combat condensation, you can choose any of the listed methods. In most cases, using them helps to eliminate unwanted moisture. If these options are not effective enough, it is possible to get rid of the formation of condensation on the pipes of cold water supply by waterproofing all surfaces of the room. High-quality performance of this type of work is possible only with special knowledge and skills.

bathroom pipe paint

Modern dwellings, among other things, consist of various engineering structures and communications, including: a gas pipeline, sewerage, water and heat supply, telephone and Internet networks. Some of their components, such as pipes, may need protection against corrosion. To do this, it is best to paint them. Apart from a practical purpose, the paint will give the pipes a pleasant appearance. The only condition for this operation is the ability to get to the pipes.

Perhaps, for residents of many houses and apartments, this problem is not relevant. Currently, water pipes are designed from metal-plastic and polypropylene. Nevertheless, there are still a lot of iron pipes in operation, primarily located in dachas. It was from them that water pipes were installed for irrigation of crops in the areas. Water supply pipes must be re-painted every spring. How to do this is described below.

For what?

The main reason to paint pipes is, of course, to protect against corrosion. Alas, there is nowhere to get away from steel pipes: in the second half of the last century, for reasons of economy on heating, cold and hot water began to be massively installed steel pipes without anti-corrosion coating.

In the eighties and nineties, the situation was aggravated by the fact that construction organizations performing the installation of engineering networks practically ceased to be controlled and at the same time found themselves in a tight financial framework.

The consequence was the massive use of the cheapest thin-walled steel pipes in heating and water supply systems, originally intended for gas mains.

As a result, pipes, already not a model of reliability, literally crumbled into dust without painting for a dozen years.Paint could only delay the inevitable; but that's better than nothing.

Unfortunately, steel water pipes in apartments are still the most common.

Tip: the galvanized pipe itself does not need painting to protect it from rust. However, on the thread, the protective zinc layer is broken; and it is precisely the threads that are best painted.

On galvanizing, at least the thread should be painted

Preparation for painting iron pipes

Before you start painting water pipes, you need to determine what they are made of. Also, their temperature is important for the choice of paint. In addition to paint and a brush, it will be impossible to do without sanding paper, gloves, rags, cuvettes and primer. If the pipes are covered with old paint, it must be removed. After their surface is cleaned of it, it will need to be sanded. This removes rust. After that, the surface of the pipes is degreased. Then all the garbage is removed, and fresh air is allowed into the room. Only after all this does the staining begin. To prevent paint from dripping onto the floor, hold the brush over a container.

When can I use the bathroom?

You can connect a freshly painted heated towel rail to the rest of the communications and start operating it after the paint has completely dried. This period is different for different paintwork materials. For example, it takes 8 to 24 hours for alkyd enamels to dry. If in the process of painting the enamel was diluted with solvents, then this period increases to 36 hours.

The times indicated on the packaging are based on an ambient temperature of 25 ° C. In residential premises, it is usually slightly lower, so it is recommended to wait more than a day and only then start using the coil. Acrylic compounds are based on water, so high humidity also delays their drying.

One-component and two-component polyurethane paints with organic solvents are usually applied in two coats and dry for about 48 hours. Polyurethane-based water-dispersion compounds used for painting plastic pipes polymerize as the water contained in them evaporates. Their drying time depends on the temperature and humidity of the air. For complete hardening of the paint, wait 1–2 days.

Water-based silicone paints can be applied in two layers. It usually takes about 3 hours for the first layer to set, and it cures completely after 9 hours, but it is recommended to apply the second layer after 12 hours. After that, the heated towel rail is painted over again and wait for the final hardening of the paint for about a day. If during the work the composition was diluted with water, then polymerization will take longer than indicated in the instructions.

I hope the presented material is enough to properly process the pipes in the bathroom on your own. The painted heated towel rail will serve for a long time and delight you with its appearance.

Where to start coloring?

A pipe that is easily accessible is much easier to paint than one that is difficult to approach. This applies to risers and radiators. It should be painted, starting from the top and moving downward. It is important not to leave unpainted areas on the surface. The second layer should be painted when the previous layer is dry.

Plastic pipes are prepared differently for painting. After washing with warm water, they are allowed to dry. Oil or water-based paints are best suited for them. What color of the wall, the same should be the pipe.

How to paint black pipes?

The most susceptible to corrosion are communication pipes made of ferrous metals - steel and cast iron. In order to protect them from possible destruction and extend their service life, they should be painted. And before that, carry out thorough preparation: wipe off the dust and clean out the rust.

It is important that the paint is applied to a dry surface.Cast iron and steel pipes are best painted with enamel, which includes a rust converter, a primer with anti-corrosion functions and the enamel itself, which has high wear protection. It is necessary to paint over the pipe surface well using two layers.

How to paint a sewer pipe?

Recently, plastics have been used in the manufacture of sewer networks. And this material does not need the protective functions of paint. So you can paint only a metal line to give the protruding pipe a decent look.

As you know, paints exist for all surfaces, and even for plastics. To purchase the desired paint and varnish product, you need to find out what the pipe is made of (this should be written on it), and what paint is recommended for it, according to the specialist. Play it safe by reading the paint can label.

If the pipe is metal, but still not so simple. Rather, it will be easy to paint it, but it is problematic to prepare it for painting. This is due to the fact that some of the sewer networks are within sight, and some are reliably hidden. In this case, a construction hairdryer can help.

Dyeing process and recommendations

Heating systems in the bathroom need to be painted once every 2-4 years. During repair work, pipe painting is carried out at the last stage. Paint can be applied with a brush, spray or roller. Batteries can be processed on top of old layers, but only if they are intact and even. Even if there are small cracks or bumps, you will have to peel off all layers and paint the pipes again.

Paint the pipe in the bathroom

With its help, the cleaned surfaces that are in the public domain will be dried. The paint should be chosen so that it can withstand high temperature and humidity (important for bathrooms).

How to calculate the color of pipes?

It is quite difficult to immediately figure out how much paint you need to buy for pipes. After all, its consumption is calculated in square meters on a flat surface. The following knowledge can help in calculating the amount of paint:

A lot of paint is wasted when you have to paint in hard-to-reach places. Because small strokes obviously consume more paint. The first coat takes up more paint than the next. A smooth surface absorbs paint less than an uneven one.
You also need to remember that a hot pipe dries faster than a cold one. The same thing happens when painting it with spray paint.

Back to the list

Beginning of work

Modern materials from which heated towel rails (coils) are made have high strength, are reliable, do not lose their external gloss during the entire service life. But the old plumbing, especially the one that is already covered with several layers of paint, has long lost its beauty and former functionality. It is precisely this that has to be restored by pre-cleaning the rough coating to metal. If the preparation is done poorly, the new layer of paint will quickly fall behind.

It is important to know where to get started with your heated towel rail. The first step is to prepare a set of screwdrivers to remove the device from the wall.First, you need to turn off the water, let the coil cool completely, because it is under heating. When paint is applied directly to hot metal, it will dry instantly and the finished coating will be unstable. In addition, the evaporation of solvents from the paint will begin to proceed more intensively, which means that the harm to health will increase.

It is best to schedule work on painting the heated towel rail during the seasonal hot water shutdown. This will help prevent flooding of neighbors even in a situation where the coil does not have a separate shut-off valve. Thus, all actions for painting the device are carried out after dismantling the heated towel rail and cooling it down to room temperature.

Bathroom plumbing paints

Because we pay them for it!

Learn more

leonidos

Rank: 54

02 March 2020 at 16: 28 I'm getting ready for the next repair and the question arose: how to paint the pipes of the water conduit for a longer period, so that it would have a nice look. I always painted the riser and the wiring with PF115 enamel, but over the course of a year, the look of my pipes became not entirely attractive, the paint faded and in places generally darkened. Maybe there are more resistant and new coatings for such purposes, those who know and have tried, are ready to accept advice. Patrik1111

Rating: 5

March 02, 2020 at 17:25 From the temperature difference on the riser, condensation collects all the time - and this is dampness, from which any paint will suffer. Of course, you can try something expensive, but it's not a fact that it will last long. Andrey

Rank: 59

02 March 2020 at 07:23 PM I always painted cast-iron pipes with ship's red lead. It is inexpensive, resistant to humid environments and looks better than a rusty pipe painted with a different paint. Although there is also bitumen varnish ("Kuzbasslak"). It is no less effective, but it has a radical black color. Although you can add silver or bronze to it, then the color will be more pleasant. evgeny

Rating: 6

02 March 2020 at 08:21 pm Paint with water-based paints, which are specially designed for heating pipes. They dry quickly, stay on the pipes for a long time, when working with them, a specific smell is not felt (as with others). komarov

Rating: 16

03 March 2020 at 7:07 am Before painting the water pipes, take some time to remove the paint (and rust) they have been painted with. Still, it would not be bad to degrease them. If you paint without these "procedures", after a year you will do everything all over again. leonidos

Rank: 54

03 March 2020 at 22: 51The proposal to use a ship's red lead for painting water conduit pipes interested me, but once I met this type of paint and it had a typical orange color. I would like the paint to have a blue tone somewhere, perhaps? NekitVP

Rating: 25

March 05, 2020 at 04:14 PM I have always painted pipes with paint for heating radiators, it is always good to go to bed and is resistant to temperature changes and temperature expansion, it can be easily collected in any color by almost any caller, I have never regretted it. Root

Rank: 127

05 March 2020 at 16: 26Paint with the same PF-115, and so as not to darken on top, cover with a layer of alkyd varnish from an aerosol can. The varnish is more stable than paints and enamels (there are no fillers in them) and under it the paint will remain in its original form many times longer than without a protective varnish layer. Leonid_32

Rank: 230

05 March 2020 at 18: 56In addition to all this, it is also important to add a stage of coating pipes with a primer. Moreover, the pipes should not be covered with condensate until completely dry. One of the best options is an alkyd-based primer. It perfectly protects metal surfaces.

Choosing a coloring agent

Pipe paint plays an important role in repair work. The modern market offers a wide selection of paints and varnishes. Coloring agents with which heating elements are most often treated:

Alkyd enamel. The product has excellent resistance to high temperature indicators (up to + 100 ° C).When the heating is suddenly turned off, you don't have to worry about the coating - it will withstand temperature extremes.
Alkyd enamel
Water-based dispersion paint. It is considered to be quick-drying, and it is also capable of forming a durable coating. Such a tool is durable, but when buying, you will need to read in the instructions the possibility of painting surfaces that are heated.
Water-based dispersion paint
Acrylic enamel based on natural solvents. Such paint allows you to achieve a glossy surface, the color will be resistant even when exposed to ultraviolet rays and temperature extremes. Acrylic coloring agents have a strong and persistent acetone odor, which is difficult to get rid of. Therefore, you need to use them with open windows.
Acrylic enamel
Oil coloring agent. Such a substance is used only if it is necessary to paint the pipes without leaving the house. This is because the product is practically odorless. Despite this significant advantage, oil paint can turn yellow or discolor when exposed to heat.

It must be remembered that when painting pipes, you should follow the instructions for the coloring agents, as well as work with gloves and with the help of special brushes.