The main types of heating systems, which one is right for you?


Stove (air) heating

History of heating systems

What do you think about when it comes to your home? Of course, about family and friends, about how comfortable you are in their environment, about the love they show for you, about the feelings that you have for them ... And also about a large, bright house in which it is clean, cozy and warmth. Warmth of soul and physical warmth - so little and at the same time so much is needed for your home to become a real oasis of comfort and well-being. So that I would like to come here myself and invite friends, in order to feel that your home is your fortress. From time immemorial, people have sought to make their home warm. The first "heating devices" appeared in the Stone Age and were open hearths of fire, on which food was cooked, around which they warmed themselves and over which they pronounced spells. Including spells so that the fire in the hearth does not go out, otherwise the inhabitants of the cave would face a long and painful death. Since then, human ideas about comfort have undergone significant changes. Today it is not enough just to be warm in the house. It is necessary that the temperature above the floor be comfortable, the fuel is inexpensive and affordable, the heating devices do not collect dust ... Our needs have become more sophisticated, which is why modern heating devices are not at all like primitive hearths. Even the "heir in a straight line" - the fireplace - and he got heat-resistant doors and air regulators. The modernization of existing heating equipment and the invention of a completely new one are constantly taking place. The latest developments of scientists make it possible to use the energy of the sun to heat the home. Tell me, fiction? But no. In more than 70 countries around the world, there are solar energy programs that involve the use of solar energy in various areas of human life. But while the best minds of mankind are racking their brains over "solar houses" heated by the energy of the sun and wind, people continue to heat their homes with stoves and fireplaces, water radiators and electric heaters.

In urban conditions, it is not necessary to choose the type of heating. Centralized hot water heating - no alternatives. Well, the truth is, you can't build a Russian stove on the twentieth floor of a new city building. And they won’t be allowed! As a last resort, you can buy an electric heater or lay "warm floors" in the kitchen, and then as an additional source of heat.

Back to

Heating types

Heating is an artificial heating of premises in order to compensate for heat losses in them and maintain a given temperature level. Heats both residential and non-residential premises. For the former, it is important to create thermal comfort necessary for people's lives. For the second, the correspondence of the air temperature in the room to its purpose is important. For example, such conditions should be created in warehouses that would ensure the best preservation of the things in them. The air temperature in the production hall must meet the requirements of the technological process.

With regard to country houses, we are talking primarily about the heating of those premises where residents are going to spend most of their time throughout the year or some part of it. That is, the main goal of heating a house is to create comfortable living conditions, which depend, firstly, on the air temperature and, secondly, on the nature of the distribution of this temperature inside the room. The local heating system is responsible for maintaining the temperature at the proper level.However, do not forget that heat is involved in creating the microclimate of the premises, not only supplied through the "veins" (pipes or cables) of the heating system, but also released by the human body.

The first heating devices, despite the difficult living conditions and thanks to human ingenuity, appeared in the Stone Age, almost simultaneously with the appearance of the first dwellings in caves. The oldest type of artificial heating was heating by burning fuel in a hearth, erected directly inside the cave. The hearth simultaneously served both for heating, and for cooking, and for heating water, and even for ritual purposes. Since then, many designs of hearths and stoves have been developed, used in everyday life. Many types of solid fuels have also been tried for heating homes, to which natural gas and petroleum products were added in the 19th century. The most common type of water-based heating at the moment appeared even during the slave system. It is known that water heating was successfully used in Ancient Egypt and served as a prototype for the creation of the famous heating systems in the Roman Empire and in the territory of modern Turkey. The city baths served as a source of heating in Ancient Egypt: drains were made in the semi-bath rooms for heated water that went into the general drain of the city and provided the Egyptians with heat. The heating system of ancient Egypt is an example of one of the first central heating systems. In the 10th century BC. e. in the city of Ephesus, located on the territory of modern Turkey, a system of autonomous water heating appeared, in which living quarters were heated by means of simple pipelines and boilers located in the basement of each individual house.

At the end of the 1st century BC. e. Roman architect and engineer Vitruvius described in detail the air heating system that was widespread in the territory of Ancient Rome. It was the first artificial heating system for urban spaces using hot gases. For heating Roman baths and living quarters, a hypocaust was used - a heating device that consisted of a stove located outside the heated room and a system of pipes that conduct heated air. Outside air entering the hypocaust was heated with hot gases and through a system of pipes and channels under the floor of the building entered the heated room. Medieval castles in Europe were heated according to the same principle. Moreover, for quite a long time, such heating remained the main type of heating in medieval cities, until in the 15th century stove heating appeared in the form in which we know it, and did not determine the nature of heating residential premises for several centuries to come. With stove heating, the air in the room was heated when it came into contact with the surfaces of a hot stove located inside the heated room, and the products of fuel combustion were discharged outside through specially made chimneys.

Back to

Centralized and autonomous heating

At the moment, a distinction is made between centralized and autonomous (local) heating systems. In district heating systems, heat is generated outside the heated buildings and then transported through long and branched pipelines to the target rooms. This type of heating is typical for cities, especially for multi-storey buildings and non-residential premises.

In low-rise buildings and rural areas, centralized heating is inapplicable due to the considerable remoteness of consumers from the source of thermal energy. Therefore, autonomous heating systems are most often used here, which are characterized by the location of a heat generator in a heated building.In local heating conditions, a heat generator is used to heat one building and is often a multifunctional device designed not only for heating a room, but also for heating water. In recent years, when, with the onset of cold weather, we all become witnesses, and even participants, numerous human tragedies, the cause of which is the inability of the centralized heating system to provide people with the necessary heat, the issue of autonomous heating becomes unexpectedly relevant (even in urban conditions). The budgetary funds allocated for heating are, to put it mildly, insufficient. Heating networks are in a deplorable state. Losses of useful heat reach about 30% (for comparison: in the prosperous West, this figure is only 2%!). All this points to a serious crisis in district heating, the way out of which is to create numerous independent heating systems. Moreover, this is facilitated by the rapidly developing country house construction.

Back to

Water heating

On the territory of Russia, water heating is the most common type of centralized and autonomous heating. As a matter of fact, it is not entirely correct to call this type of heating "water", since not only water can be used as a heat carrier, but also any other heat-intensive liquid that meets the necessary physical and technical requirements. It is more correct to call such heating "traditional", especially since this term exists, and it is due precisely to the breadth of distribution of water heating systems.

In a traditional heating system, a liquid heat carrier heated to the required temperature, which is most often aerated water, passing through a system of pipelines and heating devices, gives off its heat to the air in the heated room. The reason for the popularity of traditional heating is explained by the combination of a number of advantages: - low cost and economical consumption of materials - pipes of a smaller diameter are required for a water heat pipe than for an air one; - high heat capacity of the heat carrier - a unit of water volume contains a greater amount of heat compared to other types of heat carriers (for example, the heat capacity of water is 4000 times greater than the heat capacity of air heated to the same temperature); - creation of a comfortable temperature regime.

However, unlike other types of artificial housing heating, traditional heating is laborious to install and operate. Firstly, the creation of a water pipeline is possible only during the construction or overhaul of the building, since it requires a large amount of construction work. Secondly, uninterrupted operation of the heating system is ensured by continuous heating of the coolant, which means that you need to constantly monitor the operation of the heat generator. Thirdly, additional inconveniences await those who leave their country houses for a long time, especially in the cold season. Before a long-term departure, all water from the heating system must be drained. Otherwise, at negative temperatures, the water will freeze, which will lead to a rupture of the pipeline. On the other hand, the absence of water in the traditional flushing system is also not good, since corrosive processes are more intensive in a pipeline filled with air.

Back to

Direct electric heating

In conditions of direct electric heating, rooms are heated without the participation of a heat carrier: electrical energy is converted into thermal energy without any intermediaries. Direct electric heating is the most promising type of heating in Russia and the most popular type of heating in Europe. At the moment, direct electric heating in Russia is noticeably inferior to traditional and air (mainly stove) heating.And there are good reasons for this: the relatively high cost of electricity and constant interruptions in its supply, making the use of electricity as the only source of heat ineffective.

Indeed, at first glance, it seems that the use of electric heating systems requires large financial costs. However, a more careful calculation reveals a slightly different picture,

which will be discussed in more detail below. In addition, direct electric heating has many significant advantages, including: - ease and ease of use of the system, - effective ability to regulate heat supply, - small overall dimensions of heating devices, which, moreover, do not require special care, - high hygiene and environmental benefits electric heaters, - the noiselessness of the heating system, since circulation pumps are not needed for its operation.

Special attention should be paid to the environmental side of using direct electric heating. All types of fuels, with the exception of electricity, pollute the environment to a greater or lesser extent: when natural gas is burned, liquid condensate is formed, when diesel fuel is burned, a whole bunch of volatile poisonous substances are formed, and whole treatises are written about the dangers of using solid fuels. A particular problem is gas and liquid fuel leaks in faulty heating systems, which not only pollute the environment, but also become a serious threat to the life of the inhabitants of the house. All of this is unfamiliar to those whose homes are equipped with direct electrical heating systems. As a last resort, their outdated electric heaters will "burn" oxygen.

Back to

Stove (air) heating

Heated air acts as a coolant in the furnace (air) heating system, which flows through pipes into the heated rooms. This type of heating involves the installation of heaters-heat exchangers or the construction of furnaces in which the ambient air is heated. The surface of the heat generator heated from the inside, giving off heat to the air, is cooled from the outside. Therefore, the heat transfer of the device directly depends on the area of ​​its heating surface. Heating devices can operate on electricity or fuel and do not imply a sewerage device for the coolant.

Modern domestic and foreign industry produces heat generators with both natural and forced air draft. In air heaters and stoves with natural draft of heated air, there is a risk of overheating of the separating wall of the heat exchanger. In order to avoid this, it is better to purchase heat generators with forced air draft, which are equipped with a fan that stimulates the movement of air flows. Only here two problems arise at once. Firstly, it is difficult to buy heat exchangers with forced air draft, since they are produced in limited quantities. Secondly, the fan has a considerable size, and there will be plenty of noise from it.

Compared to domestic ones, imported heaters have an economical mode of operation and are usually turned on in the absence of residents. This dignity is not as unconditional as it might seem at first glance, and, in fact, is a double-edged sword. In the economy mode, household dust settles on horizontal surfaces, and when the air heater is switched to the standard operating mode, the air currents raise dust, which even wet cleaning cannot cope with.

By itself, heated air (or gas) has a number of advantages over other types of heat transfer fluids, such as quick heating and high penetrating ability.However, once popular in rural areas, air heating is less and less used to heat living quarters, gradually being replaced by direct electric and traditional heating.

This is due to a number of disadvantages, inevitable satellites of the air heating system: - bulky dimensions of the heat generator (stove, fireplace, etc.); - low heat transfer coefficient of air - the heating capacity of air is ten times less than that of water, which means that heating a room will require thousands of times more heated air than water; - Difficulties in the distribution of heated air in the heated rooms due to the insignificant value of the resulting air pressure; - low ecological qualities; - the high cost of the system - before, the stoves were built with their own hands, but now they practically do not know how to do this, and there is no need for this, since if you have money you can buy a heat generator.

Back to

https://youtu.be/J80OYoBOnDk

A little about heating systems

How to fill the system: types of coolants and their parameters

A heating system is a set of related elements, the purpose of which is to receive, transport and transfer heat to the premises. There are three main structural elements in any heating system.

  1. Heat source. With autonomous, local heating, it is a heat generator, in centralized systems - a heat exchanger.
  2. Heat pipelines are structures through which the coolant is transported to the consumer equipment.
  3. Heating devices, radiators are elements that transfer heat directly to the room.

The movement of heat through the pipeline is provided by the heat carrier - liquid or gaseous medium. The first medium is water or non-freezing liquid, the second is air, steam, fuel combustion products.

Rating
( 1 estimate, average 4 of 5 )

Heaters

Ovens