The bathroom is a very important place for every modern apartment, because in this room not only all sanitary and hygienic needs of a person are met, but also washing and sometimes drying of clothes. Due to the high humidity inside the bathroom, a complex microclimate is formed, which has a negative effect on the decoration of the walls, ceiling or floor, the state of furniture and plumbing.
To make the bathroom warm and comfortable to wash, and the laundry to dry faster, a heated towel rail is installed on one of the walls of the room. In this article we will tell you how to properly connect a heated towel rail to a heating or hot water supply system.
What is a heated towel rail?
A heated towel rail is an additional heater for a bathroom that heats a room to an acceptable temperature. Its device is quite simple, it is a curved pipe, fixed with special brackets on the wall of the bathroom. It performs the following functions:
- Heating the room. And the bathroom does not provide for the installation of wall-mounted heating devices, therefore it is always a little cooler inside this room than in the rest of the apartment. This is especially felt after taking a bath, because if the body heated up by hot water is suddenly cooled, you can get sick. The heated towel rail in the bathroom raises the temperature to a comfortable level.
Note! A heated towel rail is a curved metal pipe that is attached to the bathroom wall. Metal is a good conductor, so it transfers heat well to the surrounding space. Thanks to this, it becomes warmer and more comfortable inside the bathroom.
Types of heated towel rails
Before connecting the heated towel rail to the heating system, you must select the appropriate model. Plumbing shops have a huge assortment of bathroom coils. They differ in the material from which they are made, shape, pipe diameter, connection method and price. But the most important characteristic is the type of coolant that is used to heat it. There are the following types of heated towel rails:
- Coils connected to the heating system. The bulk of heated towel rails are connected to the central water supply system, so it heats up only when it is functioning. On the one hand, such models are very cheap to operate and reliable, but on the other hand, they do not work in the summer when the heating is turned off. It turns out that the coil does not heat up exactly when it is most needed.
Please note that from the point of view of operation, the most reliable models are water heated towel rails. They work reliably throughout their entire service life and rarely break. However, their functioning depends on the presence or absence of hot water in the pipes. The electric coil is warm, even the heating is off.
Which is more convenient - a water or electric model?
So, a dryer is a necessary thing to ensure a normal microclimate in the bathroom. What is more convenient and more efficient to use - is it an electric water heated towel rail?
Comparing the advantages and disadvantages of the two models, it is safe to say that an electric heated towel rail is more convenient to use, because:
1. It is easy to install; 2. Can be turned on and off at any time; 3. It does not flow or rust; 4. Works even in the absence of hot water.
At the same time, an electric heated towel rail is significantly more expensive than its water counterpart.In addition, although it is a little, it still consumes electricity, which is reflected in the total electricity bill. However, the most common cable model of a heated towel rail consumes no more energy than a conventional incandescent lamp.
All electric and water models of Energy heated towel rails are presented on our website. We offer discounts on all products and convenient delivery on any day of the week.
How to choose a coil?
Do-it-yourself installation of a heated towel rail is a routine operation that even an inexperienced master can handle. Before starting installation, it is important to correctly determine the correct model of the device. When choosing, you need to take into account the following characteristics of the device:
- Connection points. There are heated towel rails with vertical, horizontal and universal connections. The choice of model depends on where the entry points to the heating system or connections to the riser are located.
- The form. Various models of coils can have one or more pipe turns; also very popular are ladder-shaped devices, where there is a lot of space for drying clothes.
Please note that in order to successfully install a coil in your bathroom, you must accurately determine the correct model. Maximum attention should be paid to the diameter of the heated towel rail pipes and the distance between the connection points. If these parameters do not correspond to the place of connection, then you will have to use adapters to connect, which often cause leaks.
Connectivity technology
The scheme for connecting a heated towel rail to hot water supply (hot water supply) is quite simple, so you can cope with this task without involving a third-party master. During installation, the coil is built into the general heating or water supply system and becomes an integral part of it, therefore, its installation must be approached very responsibly. This operation is performed in the following order:
- First of all, you should cut off the water supply in the apartment or separately inside the room in which the plumbing equipment is being installed. You can also open hot and cold water taps to reduce the pressure in the system.
- First you need to dismantle the old heated towel rail, if installed. It is often quite difficult to do this, as the thread "sticks" over time or is tightly fastened with layers of paint.
- Then, valves of the corresponding diameter are placed on the pipes to which the coil will be connected. This is necessary in order to be able to regulate the flow of water, as well as to conveniently and quickly shut off pipes during repairs and accidents.
- Next, using fittings, the coil is connected. If the model has a vertical connection, then straight fittings are used, and if the connection is horizontal, angled fittings.
- After finishing work, you can restart the water supply, and then check the operation of the coil.
Please note that if the coil model is of the water type and operates from central heating, then it is recommended to replace or repair the heated towel rail at a time when the heating issue ends. If the work has to be done during the heating season, in order to shut off your riser, you must contact the management company.
Installation errors
Experienced plumbers believe that the scheme for connecting a heated towel rail to a hot water riser is so simple and straightforward that even a non-professional master can cope with its implementation. However, during installation, problems may still arise that affect the operation of the equipment. The fact is that water is supplied to the pipes of the coil under pressure, due to which all the connection points are subjected to a large load. Most often, malfunctions during the operation of a heated towel rail occur for the following reasons:
Types of bathroom radiators
Nowadays, bathroom batteries are of three types:
- Electric radiator. It is heated by electricity. It, in turn, can be oil or cable. The advantage of such a device is that when the hot water is turned off, its operation will not change. Such a radiator can also be placed in the corridor for drying shoes or clothing in winter. The downside, of course, is to pay for electricity to dress up much more.
- Water radiators. By the name, we understand that heating is provided by hot water.
- Combined radiators. This is the most popular type. Normally, it works on hot water, when it is turned off, you can use the connection to the 220V network.
Video instruction
The bathroom, like other living quarters, also needs heating. Moreover, without heating, mold will very soon form in it, and not only from the outside of the cladding, but also under it. As a result, a characteristic blooming smell appears in the bathroom, and the tiles gradually move away from the base.
Unlike other rooms in bathrooms, a heating radiator also functions as a heated towel rail. Its shape is made in such a way that it is possible to conveniently hang on the tubes not only towels, but also other things that are moisturized during water procedures. A beautiful modern heated towel rail can be a striking decorative element of the bathroom, if it is selected with taste.
The shape and design of the bathroom heater makes it work 75% by convection and 25% by radiating heat. For the sake of fairness, it must be said that recently in bathrooms, warm floors are often arranged as heating. Undoubtedly, this type of heating is very suitable for this type of room, but what to do with wet towels, ¬– not lay them on the floor. The underfloor heating system can be combined, for example, with an electric heated towel rail. This will keep your feet warm and your towels dry.
There are many models of heated towel rails on the modern market. At first glance, it may seem that by stopping at a pretty model, the problem of heating the bathroom will be solved. However, in fact, they all have their own characteristics that must be taken into account for a better choice.
In total, there are three main types of bathroom radiators: water, electric and combined.
Popular types of heating devices
The modern market for heating appliances offers a fairly wide selection of appliances designed for heating bathrooms. These include:
- metal radiators for water heating;
- infrared heaters;
- convective infrared heaters;
- oil appliances;
- electric convectors;
- fan heaters;
- cast iron radiators.
To have an idea of the different types, you can consider the characteristics of the most popular models.
Hot water radiators
Popular with users. Such devices have replaced the old, cast-iron radiators. Connecting a heated towel rail to a hot water riser is easy to make.
The advantages of such devices are:
- long service life;
- low price;
- a light weight;
- simplified installation process.
The connection diagram of the device is quite simple, any master can handle the connection of the heater. In addition, this device does not consume electricity, unlike other heaters.
Important!
Connecting a heated towel rail to a boiler is also possible, this is especially true for residents of houses with no DHW system.
Panel heaters
It is not the air in the room that warms, but the walls and the floor. The installation location of the device is the ceiling.
Such heaters do not occupy the space of the room; they are advisable to use in rooms with a lack of free space. Moreover, such a heater meets the most stringent safety requirements.
The device diagram of such a device is complex; it can fully function in rooms even with extreme humidity levels.
Also interesting: Which boiler connection scheme to choose
The advantage is energy savings - the beams of the device, depending on the need, can be directed in any direction.
The disadvantage is the high price. This is how bathroom heating mats work.
Infrared models
The heating element in convective-infrared modular heaters is an element made of a special nut with a nichrome thread inside.
This device can be hung on the wall, by the way, it does not spoil the appearance of the room. The power of the device is controlled using a thermostat.
You can place the heater not only on the wall, but also on the ceiling, while the device will warm up the room equally well.
The heating element is a ceramic panel, which is a radiator.
After heating, it outputs infrared waves. They do not come into contact with air, but they affect the surrounding objects. Such devices can be used under conditions of high humidity.
The undoubted advantage is that they do not emit unpleasant noise, unlike fan heaters, and act as a source of illumination at night.
When choosing a heating device, you need to build on not only taste preferences. It is important to compare the power of the device with the dimensions of the heated room. A pivot table will help you deal with these parameters:
| Area (sq. M) | The required power of the device providing optimal heating (W); |
| 5-6 | 500 |
| 7-9 | 750 |
| 10-12 | 1000 |
| 12-14 | 1250 |
| 15-17 | 1500 |
| 18-19 | 1750 |
| 20-23 | 2000 |
The use of insufficiently powerful appliances in large bathrooms is unjustified, this will lead to energy costs, but the heat generated will not be enough to fully warm up the room.
Fact!
The inner part of the heater heats up to 150 ° C, but the body temperature does not exceed 60 ° C.
Oil appliances
They are among the most popular devices. The electric coil, which is placed inside the device, heats up the oil, due to the boiling of which the body heats up, and then the air in the room is warmed up.
Presented in a ribbed metal case. They are installed using special anchors that come with the device.
Advice!
Such fittings may not be of very high quality, therefore it is better to purchase a set of anchors separately. The heating element of such a device is the heating element, and the heat carrier is oil.
The structure is resistant to corrosion, as the surface is covered with enamel. The thermostat protects the device from overheating, this also affects the power consumption.
The device turns off on its own after the air in the room warms up to the required temperature. The oil cooler can be used for drying laundry.
Among the advantages are also:
- high maximum temperature;
- operational safety;
- lack of noise;
- automatic shutdown in case of overheating;
- wheels for ease of movement.
Also interesting: Which is the best to make the ceiling in the bathroom
Preference should be given to devices with a built-in air ionizer, because oil heaters dry out the air in the room.
You should not purchase cheap models, because during operation they can emit an unpleasant odor.
Electric convectors
Used for space heating. The device consists of a metal body and an internal heating coil. The air passes through the heating section and warms up.
It is worth noting that the efficiency of such heaters is improved if such devices are placed at the bottom.
When choosing heaters of this type, you should pay attention to:
- devices with a ceramic heating element do not burn air;
- for use in the bathroom, you need to give preference to devices with high protection against moisture;
- the advantage will be the presence of wheels for the free movement of the device;
- room heating speed.
The disadvantage of devices made according to this scheme is that they have a built-in fan, which often acts as a source of unnecessary noise.
Fan heaters
They are the simplest heating devices, and many users choose them for heating bathrooms. The power of such devices is quite high.
They are compact enough that they can be installed on the floor or other flat surface.
A fan heater is an elementary device consisting of a plastic case, a fan and a heating coil.
Among the advantages are:
- low cost;
- ease of use;
- device mobility;
- the ability to quickly warm up the room;
- ease of management;
- small size;
- modern appearance.
The device has certain disadvantages, for example, it makes an annoying noise and exudes an unpleasant odor.
Water heated towel rails
These are the most common special bathroom heaters. Their work is simple: hot water flows through the tubes, where it gives its body to the room. The most popular used to be the so-called. coils. This design remains relevant today, but only modern coils are much more beautiful and efficient.
There are several ways to supply water from the heating circuit to heated towel rails. The classic connection scheme implies the presence of hot water supply and a heating circuit brought into the bathroom. In apartments, a central heating heating circuit is already present in the bathroom.
In private houses where autonomous water heating is used, it is easier to find a heated towel rail in the bathroom. This is due to the fact that the coolant in the system, as a rule, is clean and does not destroy the walls of the radiators. In apartments, when choosing a heated towel rail, there is a certain limitation regarding its material. For example, non-ferrous metal models are of little use there, since hot water saturated with antagonist metals is an aggressive environment for them.
The disadvantage of connecting a heated towel rail to heating circuits is their seasonal use, i.e. a towel or bathrobe cannot be dried in warm weather. However, this problem can be solved by combined models capable of operating on both hot water and electricity.
Bathroom heating (forgot about PS
Ap4u wrote: There is no option to redo the repair ...
There are options. Moreover, at least SEVERAL, of which for sure, you can choose ONE acceptable. : yu Only you DO NOT see them (and this is normal, because you are not a specialist).
In my opinion, you are complicating things by avoiding normal heating wiring. Really on electric heating - just go broke. And this ruin will be lifelong. And the Spartan conditions of severe cold are complete darkness. In a month you will howl another.
Just imagine: the shower is warm or even very warm. You feel good, very good. The buzz. And then you turn off the water and find yourself all wet in the refrigerator. The buzz will disappear immediately. While getting out of the bathroom and drying / dressing, you will freeze completely. Feelings of pleasure will suddenly change into anger. After that, only the unpleasant sensations of discomfort from taking a previously so beloved shower or bath will remain in the memory. As a result, after a while, hygiene procedures will be steadfastly associated with terrible torture. And that's still good. And here's a darker prognosis: you'll end up with pneumonia. Which will eventually become chronic. Do you need it?
It's the 21st century, and you're almost driving yourself into a dugout.Quit Experimenting. Do ok !!!
You should show a specialist your bathroom and how the risers pass. Dust may need to be applied, but not enough to make a new finish. It is NOT necessary to make grooves in the wall for heating pipes, because they run along the wall and heat the room. The only thing that has to be done is to drill holes for pipes in the wall in order to lead from the riser to the bathroom. When the pipes are laid, then all that remains is to take out the debris, and close up the cracks around the pipes. For example, if you have tiles on your wall, you only need to change a couple of tiles. It is NOT difficult at all. If painted, then touch up. Simple too. If the oilcloth or wallpaper, then it is even easier - before drilling, cut it and spread it to the side, then close the hole and glue the oilcloth in place, and cut off the excess along the pipe contour.
Professionals digest the heating pipes and change the batteries in the finished living room, and so that the wallpaper is intact and clean. And you are afraid that you will have to renovate the bathroom again. But installing heating pipes is not so scary. Theoretically, I can assume that you will have to drill through the walls. But do not demolish it. And there is a head and tools for that. A normal specialist will do the job well and accurately. The floor can be covered with cardboard with oilcloth, so as not to damage the piece of cement that has fallen off the wall. Walls and plumbing can be covered with foil. Especially valuable for protection from damage can be wrapped in a blanket and covered with plastic. You can also pay a little (or more) to the plumber for the jewelry of the work. So for the money, he will do everything even more accurately.
In general, here's what you need to do: 1. Draw a diagram of the apartment, take a photo of the bathroom and drop it here. 2. According to your schemes, they will recommend something here. You soberly assess all the options and come to some conclusion. 3. Find a professional who will do IT for you. 4. Moreover, once again discuss different options with a specialist. And come to the most optimal (first of all for you, since you live in this; secondly, the most acceptable in terms of implementation, i.e. the one that will suit the specialist). 5. A little (or a lot) you worry in the midst of the process, when thunder is thundering and the dust stands in a pillar (ie the plumber is working). 6. And then all the rest of the time you enjoy the comfort of a warm bathroom.
So, THINK and make NORMAL heating !!!!!
Electric heaters
If the bathroom does not provide for a connection to the heating circuit or there is no central water heating in the house at all, then electric models of heated towel rails come to the rescue. They work on the principle of oil coolers and only need to be connected to the mains. Electric heated towel rails are designed in such a way that the coolant circulates freely through their tubes, due to convection resulting from contact with the heating element. There are models from 100 to 1500 watts. With such a wide power range, you can find the right appliance for any bathroom.
Advanced models of electric heaters for bathrooms are able to cope with their basic functions, spending no more energy than an incandescent light bulb. Of course, the cost of such devices will be higher than that of more wasteful ones. Economical heaters last longer, and during their operation they have time to pay for themselves many times over.
One of the main advantages of electric heated towel rails is that they can be turned on and off as needed. Not all water models can provide this opportunity. Electric models are equipped with work timers, with which you can set the schedule for the device. So, waking up in the morning and going into the bathroom, you can take a shower at a comfortable temperature, which is considered to be 24 ° C.
Based on the optimal temperature and area of the bathroom, it is necessary to select an electric heater of the appropriate power. To maintain the temperature of 24 ° C, it is necessary that for each square meter there is 100-120 W of the power of the heating device. If there is a window in the bathroom, the power must be increased to 130-150 W / m².
Electric towel warmer models are mainly made of stainless or low carbon steel. The former are more expensive, but they have a very long service life. Low carbon steel models are less resistant to corrosion, but can last up to 15 years. Choosing products from well-known manufacturers, you can be sure of their quality assurance.
Wall mounted bathroom heaters
Today, underfloor heating is often used as heating a bathroom. The decision is reasonable, but where to dry robes and towels? Not on the floor. Towel dryers and electric heaters will help solve the dilemma. The devices are perfectly combined with the underfloor heating system - and the towels dry quickly, and your feet are always warm.
Water heated towel rails
This invention is not new. In every Soviet bathroom there was a coil with paint peeling from dampness. Every little thing, like socks and handkerchiefs, was dried on it. Today the bent pipe has been replaced by a sleek chrome-plated device that performs the same function. Such a device is powered by a hot water supply or a heating system.
The coil must be made of stainless steel, because the steel tube will quickly deteriorate in a humid environment. A copper and brass heated towel rail can be connected to an autonomous heating system.
Attention! Non-ferrous metal models are not suitable for district heating systems. Water in pipes is a corrosive medium for non-ferrous metals.
Electric heated towel rails
If the house does not have hot water supply and hot water heating, an electric heater is installed in the bathroom. It is connected to a 220 volt alternating current network and works on the principle of an oil cooler. A coolant circulates through the tubes of the device, which heats up from the heating element. The standard electric battery for the bathroom is made in the form of a coil or ladder.
Coil-shaped electric heated towel rail
Modern models consume no more energy than incandescent bulbs. For convenience, the device is equipped with a timer and a thermostat, with which you can set the operating schedule and temperature range.
Important! The heating appliance is placed at least 60 cm to the edge of the bathroom, sink or toilet. The heater plug must be insulated with an O-ring for the socket. For greater safety, an RCD is installed - a device to de-energize the device in the event of a short circuit. The installation should be done by professionals.
Finally. When choosing a radiator for a bathroom, you do not need to look at the design - the battery, if necessary, can be covered with a decorative screen. In the first place should be practicality, reliability, heater power. Savings are also irrelevant here. An expensive high-quality device installed by a specialist will work for many years and will repay its cost many times over.
Deciding on the choice of a heated towel rail
When choosing a water radiator for a bathroom, you must take into account its working pressure. It must correspond to the nominal pressure in heating systems and DHW systems. In this case, the working pressure of the device must be no less than the pressure in the system. If there is a possibility of water hammer, then radiators with an appropriate margin of safety should be chosen.
It is very important to choose the right radiator power. To facilitate this task, many manufacturers include power calculation tables in their technical documentation. The previous section described the principle of choosing the power of electric heaters.The same principle can be used when choosing any radiator with a known heat output. We remind you that 100-120 W of thermal power should fall on 1 m².
Of course, this is an average calculation, since it lacks such an important parameter as the height of the room. A more accurate calculation can be made by a specialist who will take into account the volume of the bathroom, as well as the number of windows, floor, wall material, the scheme of their insulation and the section of ventilation ducts.
Installation of heated towel rails
A very important point, which few people pay attention to, is the occurrence of stray currents between different metals in the joints of the pipes of the circuits with the radiator. These currents contribute to the appearance of metal corrosion. A dielectric spacer must be installed between the steel pipes and the non-ferrous metal inlets of the radiator.
So that the installation of water radiators does not cause difficulties, it is necessary to choose a model that most closely matches all the parameters of the heating system. In most cases, the threaded connections of the radiators are unified with the dimensions of the fittings.
The easiest to connect are electrical models of bathroom radiators. However, in this case, special attention must be paid to the reliability and tightness of the electrical connections. Since the bathroom is a room with high humidity, only special sockets and plugs can be used in it. The socket must have a splash-proof cover and the plug must be fully insulated with an O-ring for mating with the socket. Additionally, an RCD (residual current device) should be provided that will de-energize the heated towel rail when a short occurs. The connection cord must be double insulated and have the appropriate cross-section.
To completely secure the outlet in the bathroom, you can use a hidden connection through communications. The electrical cable is fed to the radiator in the same way as pipes to water models - laid in the wall.
The standard place for a radiator in a bathroom is on the side of the bathroom or near the toilet. It is possible to install a radiator directly above the bathtub if it is not being used as a shower. In spacious bathrooms, you can use two or more heated towel rails at the same time, or a combination of a large and small model from the same series. When choosing a place, they are also guided by considerations of the rationality of the connection: it is desirable that the connection pipes are as short as possible. If it is possible to refuse an extra bend or half a meter of pipe length, then it is worth doing this, but not to the detriment of the ergonomics of the room.
In the bathroom, according to statistics, there are a lot of accidents. A person should always be careful here. Slippery floors and damp wiring are a source of danger. You can fall, you can suffer from electric shock. The walls are corroded by fungus, one must constantly think about good detergents and cleaning agents, cleaning and disinfection. This can be annoying. In order to calmly go into your bathroom, wash, brush your teeth, wash your hands, it would be good to get rid of nervous tension.
Types of radiators
- Cast iron batteries. Of course, radiators of this type in a small bathroom will look very cumbersome, but they also have their own advantages. Cast iron, due to its unique properties, provides excellent heat transfer rates. Such radiators serve in the heating system for several decades, practically do not create problems in operation. In order to prevent the metal from corroding in a room with high humidity, it is protected with a special paint sprayed onto the surface of the cast iron. The powder contains polymers, metal particles, ceramic dust.
- Steel radiators. Not the best option for a room where there are constant changes in temperature and humidity.Steel will rust very quickly and become unusable. Leaks can form in the battery, which are almost impossible to eliminate due to their constant growth. In addition, be aware that during the seasonal inspection of the heating system, pressure build-up in the pipes may rupture thin, corroded steel.
- Aluminum radiators. A compact version of the battery for a small room, which can be used in houses and apartments where AGV is installed. It is necessary to use aluminum radiators in combination with central heating systems with caution - it is worth choosing their more reinforced models that can be resistant to water hammer.
- Bimetallic structures. Radiators of this type are made of steel, but are additionally protected by an aluminum jacket. Such a radiator can last about 20 years in a bathroom. The equipment is good because it was originally designed taking into account the features of domestic central heating systems. And, accordingly, it easily withstands water hammer during inspections.
If you are not satisfied with the look of your bathroom radiator, you can close it with a decorative screen. For a small room, the received heat will be quite enough.
Very slippery when surfaces are wet
It is great if a shower cabin is installed in the bathroom. But this is often not the case. Someone wants to wash off fatigue from themselves, but someone wants to change their body position at the end of a busy day, lie down, plunge into the water, feel weightlessness. Filling in water and pouring foam into the bathroom is not a problem. How to get into it if, for example, there is an injury or a person is many years old? How not to slip while doing this? Shower, bathtub and tiles on the floor are a source of danger. These are very slippery surfaces if water gets on them.
It is not recommended to grab the coil. It can be hot and it can be damaged. It is a stainless steel pipe, it is strong, but all that holds it is two brackets and a heating pipe. Alas, they can be torn off. The coil must not be securely fixed. He is able to create vibration.
The pipe is bent so that there is more warmth in the room. So it's dangerous to grab onto it. What to do? Dream of youth and perfect health, or get rid of stress, stop trembling and shuddering, take care of the nervous system? It does not interfere.
A good bathroom is:
- steps and handrails - it doesn't matter if it's not a pool or a jacuzzi;
- good heating and ventilation system.
It only seems that these elements are superfluous, that they will interfere. I would like, of course, that the bathroom was spacious, with a vent, a window, and water did not fall on the floor at all, the steam quickly disappeared. Of course, you can remodel the premises, regardless of whether it is a private house or an apartment.
Handrail in the bathroom
However, even with a small area, it is easy to take care of safety, there is no need to complicate the situation with redevelopment. Both a private house and an apartment will turn into an ideal place to live.
Fired up with an idea, setting a goal
Steps, handrails, their functionality are easy to disguise, so they will not embarrass. Metal towel holders, for example, can act as a reliable support. The photo clearly shows that you can grab onto them by accidentally slipping. This is a trick. To resort to it or to act more boldly - everyone decides for himself. In any case, the bathroom will remain ordinary, pretty and elegant, nothing more. Beauty hides practicality with ease. The main problem is that many elements have to be made to order.
Handrail and steps for safety
Heat the room
Steam constantly damages walls, ceilings, doors, other surfaces and even a chandelier - everything in the bathroom. In the summer, the system is saved primarily by ventilation. However, it is dangerous to rely only on it.Fungi often appear in the ventilation shaft. They will soon appear on the walls, handles - they will be discovered. Only after that it will be possible to get rid of them and think about good methods of protecting the bathroom, truly reliable.
If it is damp outside, the weather is getting worse, and autumn is coming soon, then you need to think about the heating system. How to make the heating in the bathroom that will satisfy the needs? Engineers, designers, architects, inventors, just smart people have been working for years to ensure that all the problems associated with the peculiarities of this room are solved.
Many devices have been invented, many techniques have been created for effectively counteracting moisture and dampness. These are reliable materials, varnishes, paints and more. True, they will not last long without a good room heating system.
Previously, the heating system consisted of a coil and a heating pipe. Today, a person who wants to equip a bathroom has much more opportunities. There are plenty to choose from.
Heating in a bathroom can consist of the same coil, heating pipe, and also:
Bathroom radiator
The battery in the bathroom was not invented in the USSR. A heating battery for the bathroom - no one even thought about this before. Cast iron was in vogue, one versatile design, and the battery was bound to take up a lot of space. Even a private house was never supplemented with such luxury.
An apartment or a private house - what difference does it make if the size of the bathroom is standard? The battery in the bathroom must be safe: thin, graceful. There should be enough space for a safety net. Without it, a hot battery, like a hot coil, will cause negative emotions and restrain movement.
The use of different metals, different designs and shapes makes it possible to modernize bathroom heating today. The modern radiator is slim and durable. Bulky batteries, fashionable in the USSR, are in the past. This is a recognizable image even today. They have been heating the premises for many years. And yet the new radiator is compact. He is able to dispel nostalgia.
The choice of steel or cast iron is not particularly important from the point of view of the room. Both steel and cast iron, if the shape of the radiators is rationalized and modernized in accordance with modern requirements and tasks, will not interfere. You can choose based only on the characteristics of the metals. Both steel and cast iron are relevant for making batteries. The radiator is a beautiful interior detail. A photo of these extraordinary and creative, cute and strict varieties convinces that this is the best solution. When you want more warmth, cleanliness, safety, a radiator will help.
Types of bathroom radiators
Not every heater will work flawlessly in high humidity conditions. In order to choose the right radiators for heating in the bathroom, you need to have an idea of the main technical characteristics of various types of batteries.
- Cast iron. The batteries look bulky, but they have undeniable advantages - good heat dissipation, long life and reasonable price. It is optimal if cast iron batteries are powder coated as a protective coating. This paint contains particles of metal, polymer and ceramics. The dispersion applied at the factory envelops the surface of the radiator in an ultra-strong uniform layer.
- Steel. Definitely a losing option. Iron rusts faster in a humid environment than other materials. After some time, leaks will begin, and during seasonal pressure testing, serious problems may arise: water under strong pressure will break through in the weak point of the radiator.
- Aluminum. A compact and lightweight battery for the bathroom is an ideal solution for a country house with autonomous heating. Only reinforced models can be installed in a centralized network: standard models do not withstand water hammer and constant exposure to low-quality coolant.Accelerated corrosion of aluminum can begin if the device is directly connected to a pipe made of another metal.
Bathroom aluminum radiator
- Bimetallic. A steel battery for a bathroom, cast in an aluminum jacket, will last all its 15-20 years. The developers of bimetallic radiators took into account the peculiarities of domestic heating systems.
Advice! Do not be afraid to block the path of warm air by covering the radiator with a decorative screen. Experience shows that the heat of a closed battery is quite enough to heat the bathroom.
After going through various options, they usually stop at a device that performs several basic functions: heating, drying clothes and compliance with a certain design of the room. All these criteria are met by the wall-mounted battery in the bathroom.
Warm bathroom floor - salvation
A popular technology for renovation is underfloor heating. It is most often done in the bathroom and in the kitchen, but it can be supplemented with it in other rooms. Underfloor heating is of two types, depending on the heat source: electric and water. The bathroom is not the place for technology such as electric floor heating. That's how it works. Hot water heating is the only possible solution.
There is a water heated floor from central or autonomous heating. The heating pipe in the bathroom cannot be a source of heating water. Technology must be legalized when it comes to an apartment. In a private house, everything is easier, and you can immediately start working without unnecessary difficulties. A warm floor in the bathroom, of course, will not save you from accidentally spilled water, but it will quickly remove excess moisture. The main thing is not to be stuffy. It is a source of bliss for a person's feet and a reliable assistant in the fight against dampness.
Underfloor heating in the bathroom from heating is easy to do even with your own hands. After watching this video, it will become clear how to proceed, what to buy. Before you start, you need to take into account an important nuance: the dimensions of the room will change, in particular the floor level. The floor will be taller, and much higher. On average, the height increases by 10-15 cm. Underfloor heating is pipes immersed in concrete, covered with tiles, a valve for shutdown, temperature control.
Types of bathroom heaters
The practical battery in the bathroom not only maintains the temperature balance, but also the optimum humidity. If your bathroom radiators do not work well, soon the walls will become damp, smell and become impossible to stay in the room. So, you need a wall-mounted battery for the bathroom or another heating device!
The special atmosphere of the bathroom makes you look at the usual radiators a little differently. Which of the types of structures is best suited for heating a room lined with tiles, artificial stone or other materials, you choose. But first you need to understand the entire range of goods:
- Cast iron batteries in the bathroom look quite bulky, while it is important that the usual coating quickly loses its appearance. But, in terms of the degree of heat transfer and economy of finances, such radiators are in the first place.
Advice! If your bathroom is equipped with a cast-iron battery, use powder compositions for painting.
- Steel radiators are notable for their low resistance to corrosion, so you should not risk putting them in the bathroom, you and your neighbors will not like constant leaks.
- An aluminum battery in the bathroom would look perfect! Compact, lightweight and very beautiful radiators are easy to install and can be easily suspended at any height. But the ability to corrode from the inside is poorly combined with a tie-in in centralized heating, where the water is not always clean and soft.
- Bimetallic structures are the solution for any bathroom.The warranty period is 15-20 years, excellent resistance to aggressive conditions, high heat transfer - all these are the advantages of this design. Minus one - high price.
Advice! It is better to mask bimetallic batteries with decorative screens, "sew up" with plasterboard boxes or cover them in some other way. Don't worry, even a closed radiator will have enough heat to warm up the room well.
- Infrared radiators are another ideal heating option. A huge assortment of goods offers hinged, wall, floor structures. Such emitters can even be mounted on the ceiling, which will save the usable area of a small room. The structures perfectly maintain the temperature of the bathroom, allow you to set a certain mode, and also warm up not only the air, but also interior items.
But, despite the variety of heating devices, among which there are oil heating radiators for the bathroom, electric heated towel rails and other devices, most often ordinary bathroom batteries are used.
Advice! When considering whether you need a battery in the bathroom, be sure to pay attention to all the functions of the room. If you dry laundry indoors, then a battery in the bathroom is necessary.
Bathroom air conditioner
Appliances and bathroom are not nonsense. Everyone is afraid of closures. This often prevents a person from dreaming about an air conditioner, for example. And the bathroom will only suffer. The stereotype should be changed, ask the experts what is the norm when installing and connecting an air conditioner in a room such as a bathroom.
Having learned that there is a norm and standard for the power grid, ventilation, devices, you can objectively assess the situation, make a wise decision, create your own reality. It is logical to make housing comfortable and safe, but often a person, out of habit, is content with the most necessary, elementary ones.
How rational is it to install an air conditioner? Is the bathroom big enough for this? It all depends on the dimensions, on the parameters of the equipment, on the characteristics of the ventilation pipe. This is definitely worth trying. Heating will be perfect.
Warm floor - thoroughly and for a long time
For those who do not like half-measures, there is another option for heating the bathroom - underfloor heating. It is advisable to make sure that the heated floors in the bathroom work autonomously and do not depend on neighboring rooms, since the bathroom needs year-round heating, and in other rooms it is needed only in the cold season.
Engineering provides services for the development, maintenance, consulting on engineering projects. In particular, the development of design documents for the construction of gas boiler houses and mini-CHP plants with a feasibility study of construction and other design and construction documents. The design of gas boiler houses - TsMIP GUU is carried out by high-level designers with extensive experience in various works and calculations that meet all modern requirements for projects of this kind.
